rustfs/Dockerfile.source

# syntax=docker/dockerfile:1.6
# Copyright 2024 RustFS Team
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Multi-stage Dockerfile for RustFS - LOCAL DEVELOPMENT ONLY
#
# IMPORTANT: This Dockerfile builds RustFS from source for local development and testing.
# CI/CD uses the production Dockerfile with prebuilt binaries instead.
#
# Example:
#   docker build -f Dockerfile.source -t rustfs:dev-local .
#   docker run --rm -p 9000:9000 rustfs:dev-local
#
# Supports cross-compilation for amd64 and arm64 via TARGETPLATFORM.

ARG TARGETPLATFORM
ARG BUILDPLATFORM
ARG TARGETARCH

# -----------------------------
# Build stage
# -----------------------------
FROM rust:1.95-trixie AS builder

# Re-declare args after FROM
ARG TARGETPLATFORM
ARG BUILDPLATFORM
ARG TARGETARCH

# Debug: print platforms
RUN echo "Build info -> BUILDPLATFORM=${BUILDPLATFORM}, TARGETPLATFORM=${TARGETPLATFORM}"

# Install build toolchain and headers
# Use distro packages for protoc/flatc to avoid host-arch mismatch
RUN set -eux; \
    export DEBIAN_FRONTEND=noninteractive; \
    apt-get update; \
    apt-get install -y --no-install-recommends \
    build-essential \
    ca-certificates \
    curl \
    git \
    pkg-config \
    libssl-dev \
    lld \
    protobuf-compiler \
    flatbuffers-compiler \
    gcc-aarch64-linux-gnu \
    gcc-x86-64-linux-gnu; \
    rm -rf /var/lib/apt/lists/*

# Optional: cross toolchain for aarch64 (only when targeting linux/arm64)
RUN set -eux; \
    target_platform="${TARGETPLATFORM:-}"; \
    if [ -z "${target_platform}" ]; then \
    case "$(uname -m)" in \
    x86_64) target_platform="linux/amd64" ;; \
    aarch64|arm64) target_platform="linux/arm64" ;; \
    *) target_platform="linux/amd64" ;; \
    esac; \
    fi; \
    if [ "${target_platform}" = "linux/arm64" ]; then \
    export DEBIAN_FRONTEND=noninteractive; \
    apt-get update; \
    apt-get install -y --no-install-recommends gcc-aarch64-linux-gnu; \
    rm -rf /var/lib/apt/lists/*; \
    fi

# Add Rust targets for both arches (to support cross-builds on multi-arch runners)
RUN set -eux; \
    rustup target add x86_64-unknown-linux-gnu aarch64-unknown-linux-gnu; \
    rustup component add rust-std-x86_64-unknown-linux-gnu rust-std-aarch64-unknown-linux-gnu

# Cross-compilation environment (used only when targeting aarch64)
ENV CARGO_TARGET_AARCH64_UNKNOWN_LINUX_GNU_LINKER=aarch64-linux-gnu-gcc
ENV CC_aarch64_unknown_linux_gnu=aarch64-linux-gnu-gcc
ENV CXX_aarch64_unknown_linux_gnu=aarch64-linux-gnu-g++
ENV CARGO_TARGET_X86_64_UNKNOWN_LINUX_GNU_LINKER=x86_64-linux-gnu-gcc
ENV CC_x86_64_unknown_linux_gnu=x86_64-linux-gnu-gcc
ENV CXX_x86_64_unknown_linux_gnu=x86_64-linux-gnu-g++
ENV CARGO_TARGET_DIR=/usr/src/rustfs/target/docker-build

WORKDIR /usr/src/rustfs

# Layered copy to maximize caching:
# 1) top-level manifests
COPY Cargo.toml Cargo.lock ./
# 2) workspace member manifests (adjust if workspace layout changes)
COPY rustfs/Cargo.toml rustfs/Cargo.toml
COPY crates/*/Cargo.toml crates/

# Pre-fetch dependencies for better caching
RUN --mount=type=cache,target=/usr/local/cargo/registry \
    --mount=type=cache,target=/usr/local/cargo/git \
    cargo fetch --locked || true

# 3) copy full sources (this is the main cache invalidation point)
COPY . .

# Generate static files

RUN ./scripts/static.sh

# Cargo build configuration for lean release artifacts
ENV CARGO_NET_GIT_FETCH_WITH_CLI=true \
    CARGO_REGISTRIES_CRATES_IO_PROTOCOL=sparse \
    CARGO_INCREMENTAL=0 \
    CARGO_PROFILE_RELEASE_DEBUG=false \
    CARGO_PROFILE_RELEASE_SPLIT_DEBUGINFO=off \
    CARGO_PROFILE_RELEASE_STRIP=symbols

# Generate protobuf/flatbuffers code (uses protoc/flatc from distro)
RUN --mount=type=cache,target=/usr/local/cargo/registry \
    --mount=type=cache,target=/usr/local/cargo/git \
    --mount=type=cache,target=/usr/src/rustfs/target/docker-build \
    cargo run --bin gproto

# Build RustFS (target depends on TARGETPLATFORM)
RUN --mount=type=cache,target=/usr/local/cargo/registry \
    --mount=type=cache,target=/usr/local/cargo/git \
    --mount=type=cache,target=/usr/src/rustfs/target/docker-build \
    set -eux; \
    rustup target add x86_64-unknown-linux-gnu aarch64-unknown-linux-gnu; \
    target_platform="${TARGETPLATFORM:-}"; \
    if [ -z "${target_platform}" ]; then \
    case "${TARGETARCH:-$(uname -m)}" in \
    amd64|x86_64) target_platform="linux/amd64" ;; \
    arm64|aarch64) target_platform="linux/arm64" ;; \
    *) echo "Unsupported target architecture: ${TARGETARCH:-$(uname -m)}" >&2; exit 1 ;; \
    esac; \
    fi; \
    case "${target_platform}" in \
    linux/amd64) \
    echo "Building for x86_64-unknown-linux-gnu"; \
    cargo build --release --locked --target x86_64-unknown-linux-gnu --bin rustfs -j "$(nproc)"; \
    install -m 0755 "${CARGO_TARGET_DIR}/x86_64-unknown-linux-gnu/release/rustfs" /usr/local/bin/rustfs \
    ;; \
    linux/arm64) \
    echo "Building for aarch64-unknown-linux-gnu"; \
    cargo build --release --locked --target aarch64-unknown-linux-gnu --bin rustfs -j "$(nproc)"; \
    install -m 0755 "${CARGO_TARGET_DIR}/aarch64-unknown-linux-gnu/release/rustfs" /usr/local/bin/rustfs \
    ;; \
    *) \
    echo "Unsupported target platform=${target_platform}" >&2; exit 1 \
    ;; \
    esac

# -----------------------------
# Development stage (keeps toolchain)
# -----------------------------
FROM builder AS dev

ARG BUILD_DATE
ARG VCS_REF

LABEL name="RustFS (dev-source)" \
    maintainer="RustFS Team" \
    build-date="${BUILD_DATE}" \
    vcs-ref="${VCS_REF}" \
    description="RustFS - local development with Rust toolchain."

# Install runtime dependencies that might be missing in partial builder
# (builder already has build-essential, lld, etc.)
WORKDIR /app

ENV CARGO_INCREMENTAL=1

# Ensure we have the same default env vars available
ENV RUSTFS_VOLUMES="/data" \
    RUST_LOG="warn" \
    RUSTFS_OBS_LOG_DIRECTORY="/logs" \
    RUSTFS_USERNAME="rustfs" \
    RUSTFS_GROUPNAME="rustfs" \
    RUSTFS_UID="10001" \
    RUSTFS_GID="10001"

# Note: We don't COPY source here because we expect it to be mounted at /app
# We rely on cargo run to build and run
EXPOSE 9000 9001

COPY entrypoint.sh /entrypoint.sh
RUN chmod +x /entrypoint.sh

ENTRYPOINT ["/entrypoint.sh"]
CMD ["cargo", "run", "--bin", "rustfs", "--"]

# -----------------------------
# Runtime stage (Ubuntu minimal)
# -----------------------------
FROM ubuntu:24.04

ARG BUILD_DATE
ARG VCS_REF

LABEL name="RustFS (dev-local)" \
    maintainer="RustFS Team" \
    build-date="${BUILD_DATE}" \
    vcs-ref="${VCS_REF}" \
    description="RustFS - local development image built from source (NOT for production)."

# Minimal runtime deps: certificates + tzdata + coreutils (for chroot --userspec)
RUN set -eux; \
    export DEBIAN_FRONTEND=noninteractive; \
    apt-get update; \
    apt-get install -y --no-install-recommends \
    ca-certificates \
    curl \
    tzdata \
    coreutils; \
    rm -rf /var/lib/apt/lists/*

# Create a conventional runtime user/group (final switch happens in entrypoint via chroot --userspec)
RUN set -eux; \
    groupadd -g 10001 rustfs; \
    useradd -u 10001 -g rustfs -M -s /usr/sbin/nologin rustfs

WORKDIR /app

# Prepare data/log directories with sane defaults
RUN set -eux; \
    mkdir -p /data /logs; \
    chown -R rustfs:rustfs /data /logs /app; \
    chmod 0750 /data /logs

# Copy the freshly built binary and the entrypoint
COPY --from=builder /usr/local/bin/rustfs /usr/bin/rustfs
COPY entrypoint.sh /entrypoint.sh
RUN chmod +x /usr/bin/rustfs /entrypoint.sh

# Default environment (override in docker run/compose as needed)
ENV RUSTFS_VOLUMES="/data" \
    RUST_LOG="warn" \
    RUSTFS_USERNAME="rustfs" \
    RUSTFS_GROUPNAME="rustfs" \
    RUSTFS_UID="10001" \
    RUSTFS_GID="10001"

EXPOSE 9000
VOLUME ["/data"]

# Keep root here; entrypoint will drop privileges using chroot --userspec
ENTRYPOINT ["/entrypoint.sh"]
CMD ["/usr/bin/rustfs"]