I have tested this manually on Windows 10 and have found that, while the two fonts are not strictly metric-compatible, Source Sans Pro is "close enough" to Segoe UI that it doesn't wreck manual pixel-based control layouts.
In fact, Source Sans Pro is a tiny bit smaller than Segoe UI at 9pt (which is the minimum size recommended for use with Segoe UI).
* [HIVESYS] Register the Ndisuio service so the WLAN path works live
* [NDISUIO] store the bound adapter name without its terminator
* [NDISUIO] accept an OPEN_DEVICE name with or without a terminator
* [NDISUIO] report the needed size on a query overflow
The new arch/hwpci.c file is to be included in compilation of any
FreeLdr port for platforms that are known to have PCI buses.
Will be used for PCI bus detection on UEFI, see PR #9374.
+ Update the source file headers.
This is the start of the implementation of RSOH (aka Red Screen of Hell), an informational screen that pops up after ROS has shutdown due to overheating.
Currently there's a lot of stuff to work on such as thermal zones support in the kernel and a mechanism to set shutdown thermal event bit with RtlGetSetBootStatusData, so this popup won't show up for now.
CORE-11954
Addendum to commit 2a74f5e794 (PR #9092)
- The `__halt()` intrinsic is also defined for GCC-based builds,
see: sdk/include/vcruntime/mingw32/intrin_x86.h
- The `_M_IX86` and `_M_AMD64` defines are also defined for GCC-based
builds, see: sdk/include/reactos/msvctarget.h
- Fix a WARN debug print (Reboot can be called from menu).
- Stabilize reboot fallback abstractions.
- Drop unimplemented path on ARM.
CORE-11954 CORE-17604
Determine the actual partition number, walking the boot handle's device
path to find the Hard Drive media node, which carries the partition number.
- Walk EFI_DEVICE_PATH_PROTOCOL for the boot handle
looking for a MEDIA_HARDDRIVE_DP node.
- Use HARDDRIVE_DEVICE_PATH.PartitionNumber (already 1-based per spec)
as the real boot partition.
CORE-11954
This provides some of the chipsets for PCI IRQ routing miniport support (legacy, pre-ACPI machines).
Will be the foundational piece to us getting and IRQ arbiter on non-acpi boot.
- Just after initially caching the path to the ReactOS installer, check
whether an unattend.inf file can be found in its directory; otherwise,
fall back to an unattend file in the current ReactOS directory.
- If this unattend.inf file specifies to run an unattended setup
(`UnattendSetupEnabled` value set to `"yes"`), automatically start the
ReactOS installer -- instead of starting the live environment desktop.
- If the user presses Ctrl+Shift+F10 however, disable unattended setup
(suggestion to override the behaviour with a keypress from Whindmar Saksit).
NOTE: in the `WM_INITDIALOG` dialog handlers, use `SendMessageW`
to simulate the button presses. This also allows the invocation
of `EndDialog()` (from the button command handlers) while the
`WM_INITDIALOG` message is handled, so that the USER dialog manager
can then directly close the dialog without showing it first.
Modern GCC and Clang versions now appear to generate an .edata section on FreeLoader.
This removes a check added in commit 5367ae5760, that was causing any
builds using CI or RosBE to not boot (FREELDR_IMAGE_CORRUPTION).
Fix a regression introduced in commit b050a4544e (PR #8506), when
detecting the initial video mode FreeLoader has been started with.
- In `PcVideoGetDisplayMode()`, for text modes, the number of "bytes per
scan-line" is always equal to the screen width (number of characters)
*TIMES* 2: one byte for character, one byte for attribute.
- Systematically reset the `BytesPerScanLine` in each `PcVideoSetModeWWxHH()`
sub-routine.
- Make `PcVideoGetBiosMode()` return the screen width in characters, and
compare it with what's stored in the BIOS data area for consistency.
- Slightly simplify also the return paths in `PcVideoSetMode()`.
- Note that the `VERTRES_*_SCANLINES` defines are for `PcVideoSetVerticalResolution()`
(EGA/VGA only).
This PR implements two of the three hooks that allows you to run custom
applications during 2nd-stage setup (the 3rd hook is `...\$OEM$\Cmdlines.txt`,
but that requires file copy operations, etc.)
- `DetachedProgram` is documented[^1] for NT4...2003; it is started before
installation and `UserExecute` after.
- `UserExecute` is a great place to install VM Guest Additions, one reboot
less and you have shared folders/clipboard on the first normal boot.
[^1]: https://web.archive.org/web/20090902145959/http://technet.microsoft.com/en-us/library/cc757642(WS.10).aspx
- Add winevdm_setup as an optional module that can be preloaded on install
- Prompt to install both gecko and winevdm if the installer is not on disk
- Change "DisableGeckoInst" to "DisableAddonsInst" because we are installing more than just Gecko now
- No longer use appwiz,,install_gecko hack from wine appwiz
- Delete installer after successfully installing winevdm and gecko locally
This is needed for ISO filesystem driver to work correctly,
as it assumes 2048 bytes per sector for CD-ROM media.
Happens on 86Box with board `[i430FX] ASUS P/I-P55TP4XE`,
Bochs emulator with `01/17/97-i440FX-2A69HV3CC-00` BIOS,
and some other real machines.
CORE-20640
- Write InstallationType to registry.
- If installing as Server Core, set shell to cmd.exe.
- Rename "Product Option" to "Install Type" and adjust relevant variable names.
- Reserve Nano Server installation type for future use.
JIRA issue: CORE-20645
- The `HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons`
entries were redundant between hivedef.inf and hivesft.inf.
In addition, adding them were useless, because the "Network Places"
(network location folder) icon they were specifying is already shown
by default (like the others) on the desktop.
This basically reverts commit 054c755d91 (r31545) -- originally added
for the next commit 562c812846 (r31547).
The "reason" given by this commit was also wrong: the registration
of the network folder is done instead in its `HKCR\CLSID\<the_clsid>`
registry key.
- Similarly, the `HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Bitbucket`
registry key doesn't need to be pre-created; the shell will create it
on-demand at runtime.
This reverts commit bab735cf05 (r35203).
The shortcut spawns CMD.EXE in the background and runs a specific
command-line that determines where the reactos.exe installer is:
cmd.exe /D /E:ON /C "start %SystemDrive%\%PROCESSOR_ARCHITECTURE:x86=I386%\reactos.exe"
An alternative could be:
cmd.exe /D /C "for /F %f in ('"if %PROCESSOR_ARCHITECTURE%==x86 (echo I386) else (echo %PROCESSOR_ARCHITECTURE%)"') do start %SystemDrive%\%f\reactos.exe"
(In this second case an exact value comparison is made, contrary
to the first case where all instances of "x86" would be replaced.)
The reason for using CMD.EXE, is that the `PROCESSOR_ARCHITECTURE`
environment variable contains the "almost" correct value for the
architecture directory name where reactos.exe can be found, except
for the x86 case where `PROCESSOR_ARCHITECTURE` is set to "x86"
(as on Windows) but the directory is named "I386" (as on Windows again).
The environment variables used by some shell links for the Live-environment,
are passed as data by CMake on the MKSHELLLINK build tool command-line.
When building on Windows, they are transmitted to the tool via CMD.EXE,
and we have somehow to force CMD.EXE to keep these variables unexpanded.
Depending on the precise context where these variables are being used,
either use an "escaped" format with `^%`, as in: `^%SystemRoot^%` ,
or, surround the variable name with `^` instead: `%^SystemRoot^%` .
This second form appears to work when the variable is specified within
a quoted sub-string given to the CMD.EXE command-line.
Addendum to commit a46e1e96ec.
Only handle `DESTINATION`, and transfer all the other parameters verbatim to `add_link()`.
Addendum to commits 3a3b16af0d, 8cb3980766, and a46e1e96ec (PR #8936).
CORE-19691
Removing the `livecd_start.cmd` entry also caused the "Profiles/Default User/My Documents"
directory to not be created in the LiveImage. When booting it, this
caused explorer.exe to hang while loading the desktop, for **some**
(but not all) non-english environments.
(Technically it should instead ignore the non-existing directory if it
cannot create or open it, or drop an error then continue execution...
But that's another bug for another time!)
Adding back the creation of this directory fixes the hang.
CORE-15156, CORE-19691, CORE-19692
Finally get rid of the livecd_start.cmd hack introduced waaaay back
in commit ff6d7b0236 (r54514)!
See also commits ea682b6909 (r54512) and 71867403fd (r54513).
For target paths, use the shell "special shell folder" syntax:
`shell:windows\...` or `shell:system\...`, introduced in commit
7b081be46d (PR #7158) by Whindmar Saksit.
Specify an explicit icon path and index for the "Read Me.lnk" shortcut.
Includes ideas from PR #7154 by Katayama Hirofumi MZ.
The generated shell links are confirmed to work on ReactOS, but also on
Windows 2003 and Windows 7.
- Change the MKSHELLLINK icon parameter syntax to be: `-i [icon_path[,nr]]`
where, either both `icon_path` and icon index are given, separated by
a comma ',' , or, either the `icon_path` is given but the index is
optional (default: 0), or, only the icon index is given, in which case
the icon path is set to the target instead.
- Use a `VERBATIM` command-line for `add_custom_command()`, so that *nix
builds can cope with parameters containing backslashes.
- The shortcut target path, working directory, command-line arguments,
and icon path all may specify explicit Win32 environment variables
(like `%SystemRoot%`, `%HOMEDRIVE%`, etc.). Because these environment
variables are specified as data given to the build tool via CMake,
**AND** we have to workaround keeping these variables unexpanded when
they are transmitted to the tool via CMD.EXE (on builds made on Windows),
specify these variables in an "escaped" format, using `^%` instead:
`^%SystemRoot^%`, etc.
Additionally these paths may be explicitly quoted and passed that way
to the MKSHELLLINK tool.
In order to deal with both unquoting the strings and unescaping the
environment variables, introduce a helper function and invoke them on
the aforementioned strings.
- Use variables to define and hold the on-disk shortcuts destination
directories (the "Profiles/All Users/..."), and use these variables
in the `add_livecd_shortcut()` calls; this allows shortening the
corresponding lines.
- There are currently two shortcuts: "Command Prompt" and "ReactOS
Explorer", that are added to more than one destination.
Previously, we had to invoke `add_livecd_shortcut()` for each
destination. However, each invocation recreated the _**same**_
shortcut file (with the same .lnk file name) in the build directory.
To solve this, the `dest` parameter of the `add_livecd_shortcut()`
function, is replaced by a `DESTINATION` keyword, whose value is
a list of one or more destination directories, where the shortcut
should be added.
CMakeLists.txt: `add_livecd_shortcut()`:
Turn the macro into a function. Instead of keeping a `LIVECD_SHORTCUTS`
global-scope list variable, just define a `livecd_links` custom target
as initially empty, then, using `set_property()`, directly append to it
its "SOURCES" i.e. generated .lnk files.
(This is equivalent to using `target_sources(livecd_links PRIVATE ...)`
only in CMake 3.20+ for the custom target.)
CMakeMacros.cmake: `add_link()`:
- Since both `name` and `path` parameters are mandatory, make them
explicit in the function declaration instead of defining them as
"optional" parameters.
- Remove the `set_source_files_properties(... PROPERTIES GENERATED TRUE)`
invocation that followed the `add_custom_command(...)` call, since,
per the documentation[^1],
"Each output file will be marked with the `GENERATED` source file
property automatically." (Since CMake 3.2 at least.)
[^1]: https://cmake.org/cmake/help/v3.17/command/add_custom_command.html
The PAE flag might be enabled on some x86-32 UEFI platforms, causing a crash in the kernel.
```
Assertion C:\reactos-master\reactos\ntoskrnl\mm\ARM3\miarm.h(971): PointerPte->u.Hard.Valid == 0
nt!MI_WRITE_VALID_PTE+0x28:
822d1d08 cd2c int 2Ch
```
Tested using qemu with `OVMF32_CODE_4M.fd` firmware, and with 32bit UEFI in VMware.
- Make the menu contents more dynamic; inspired by PR #8871 by Ahmed Arif.
- advopts.c: Double-relicense ntldropts.c/h to GPL-2.0-or-later or MIT,
as most of the code in this file has been rewritten for years now.
- options.c (FreeLoader setup options menu):
Double-relicense options.c/h to GPL-2.0-or-later or MIT, as most
of the code in this file has been rewritten since commit 9ff4e4b9ef.
