lywsvip/sh
1
0
Fork 0
mirror of https://github.com/kejilion/sh.git synced 2026-06-01 00:04:24 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
patch-1
sh/menu.sh
eooce 5f42943640 Add files via upload
2024-03-06 09:53:58 +08:00

3202 lines
157 KiB
Bash
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
#!/usr/bin/env bash
# 当前脚本版本号
VERSION='3.02'
# IP API 服务商
IP_API=("http://ip-api.com/json/" "https://api.ip.sb/geoip" "https://ifconfig.co/json" "https://www.who.int/cdn-cgi/trace")
ISP=("isp" "isp" "asn_org")
IP=("query" "ip" "ip")
# 自建 github / gitlab cdn 反代网，用于不能直连 github / gitlab 的机器
CDN_URL=("cdn1.cloudflare.now.cc/proxy/" "cdn2.cloudflare.now.cc/https://" "cdn3.cloudflare.now.cc?url=https://" "cdn4.cloudflare.now.cc/proxy/https://")
# 环境变量用于在Debian或Ubuntu操作系统中设置非交互式（noninteractive）安装模式
export DEBIAN_FRONTEND=noninteractive
E[0]="\n Language:\n 1. English (default) \n 2. 简体中文\n"
C[0]="${E[0]}"
E[1]="To check if the WireGuard kernel module is already loaded. If not, attempt to load it and recheck."
C[1]="判断系统是否已经加载 wireguard 内核模块，如果还没有则尝试加载，再重新判断"
E[2]="The script must be run as root, you can enter sudo -i and then download and run again. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[2]="必须以root方式运行脚本，可以输入 sudo -i 后重新下载运行，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[3]="The TUN module is not loaded. You should turn it on in the control panel. Ask the supplier for more help. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[3]="没有加载 TUN 模块，请在管理后台开启或联系供应商了解如何开启，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[4]="The WARP server cannot be connected. It may be a China Mainland VPS. You can manually ping 162.159.193.10 or ping -6 2606:4700:d0::a29f:c001.You can run the script again if the connect is successful. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[4]="与 WARP 的服务器不能连接,可能是大陆 VPS，可手动 ping 162.159.193.10 或 ping -6 2606:4700:d0::a29f:c001，如能连通可再次运行脚本，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[5]="The script supports Debian, Ubuntu, CentOS, Fedora, Arch or Alpine systems only. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[5]="本脚本只支持 Debian、Ubuntu、CentOS、Fedora、Arch 或 Alpine 系统,问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[6]="warp h (help)\n warp n (Get the WARP IP)\n warp o (Turn off WARP temporarily)\n warp u (Turn off and uninstall WARP interface and Socks5 Linux Client)\n warp b (Upgrade kernel, turn on BBR, change Linux system)\n warp a (Change account to Free, WARP+ or Teams)\n warp p (Getting WARP+ quota by scripts)\n warp v (Sync the latest version)\n warp r (Connect/Disconnect WARP Linux Client)\n warp 4/6 (Add WARP IPv4/IPv6 interface)\n warp d (Add WARP dualstack interface IPv4 + IPv6)\n warp c (Install WARP Linux Client and set to proxy mode)\n warp l (Install WARP Linux Client and set to WARP mode)\n warp i (Change the WARP IP to support Netflix)\n warp e (Install Iptables + dnsmasq + ipset solution)\n warp w (Install WireProxy solution)\n warp y (Connect/Disconnect WireProxy socks5)\n warp k (Switch between kernel and wireguard-go-reserved)\n warp g (Switch between warp global and non-global)\n warp s 4/6/d (Set stack proiority: IPv4 / IPv6 / VPS default)\n"
C[6]="warp h (帮助菜单）\n warp n (获取 WARP IP)\n warp o (临时warp开关)\n warp u (卸载 WARP 网络接口和 Socks5 Client)\n warp b (升级内核、开启BBR及DD)\n warp a (更换账户为 Free，WARP+ 或 Teams)\n warp p (刷WARP+流量)\n warp v (同步脚本至最新版本)\n warp r (WARP Linux Client 开关)\n warp 4/6 (WARP IPv4/IPv6 单栈)\n warp d (WARP 双栈)\n warp c (安装 WARP Linux Client，开启 Socks5 代理模式)\n warp l (安装 WARP Linux Client，开启 WARP 模式)\n warp i (更换支持 Netflix 的IP)\n warp e (安装 Iptables + dnsmasq + ipset 解决方案)\n warp w (安装 WireProxy 解决方案)\n warp y (WireProxy socks5 开关)\n warp k (切换 wireguard 内核 / wireguard-go-reserved)\n warp g (切换 warp 全局 / 非全局)\n warp s 4/6/d (优先级: IPv4 / IPv6 / VPS default)\n"
E[7]="Install dependence-list:"
C[7]="安装依赖列表:"
E[8]="All dependencies already exist and do not need to be installed additionally."
C[8]="所有依赖已存在，不需要额外安装"
E[9]="Client cannot be upgraded to a Teams account."
C[9]="Client 不能升级为 Teams 账户"
E[10]="WireGuard tools are not installed or the configuration file warp.conf cannot be found, please reinstall."
C[10]="没有安装 WireGuard tools 或者找不到配置文件 warp.conf，请重新安装。"
E[11]="Maximum \${j} attempts to get WARP IP..."
C[11]="后台获取 WARP IP 中,最大尝试\${j}次……"
E[12]="Try \${i}"
C[12]="第\${i}次尝试"
E[13]="There have been more than \${j} failures. The script is aborted. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[13]="失败已超过\${j}次，脚本中止，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[14]="Got the WARP\$TYPE IP successfully"
C[14]="已成功获取 WARP\$TYPE 网络"
E[15]="WARP is turned off. It could be turned on again by [warp o]"
C[15]="已暂停 WARP，再次开启可以用 warp o"
E[16]="The script specifically adds WARP network interface for VPS, detailed:[https://github.com/fscarmen/warp-sh]\n Features:\n\t • Support WARP+ account. Third-party scripts are use to increase WARP+ quota or upgrade kernel.\n\t • Not only menus, but commands with option.\n\t • Support system: Ubuntu 16.04、18.04、20.04、22.04,Debian 9、10、11,CentOS 7、8、9, Alpine, Arch Linux 3.\n\t • Support architecture: AMD,ARM and s390x\n\t • Automatically select four WireGuard solutions. Performance: Kernel with WireGuard integration > Install kernel module > wireguard-go\n\t • Suppert WARP Linux client.\n\t • Output WARP status, IP region and asn\n"
C[16]="本项目专为 VPS 添加 warp 网络接口，详细说明: [https://github.com/fscarmen/warp-sh]\n 脚本特点:\n\t • 支持 WARP+ 账户，附带第三方刷 WARP+ 流量和升级内核 BBR 脚本\n\t • 普通用户友好的菜单，进阶者通过后缀选项快速搭建\n\t • 智能判断操作系统: Ubuntu 、Debian 、CentOS、 Alpine 和 Arch Linux，请务必选择 LTS 系统\n\t • 支持硬件结构类型: AMD、 ARM 和 s390x\n\t • 结合 Linux 版本和虚拟化方式，自动优选4个 WireGuard 方案。网络性能方面: 内核集成 WireGuard > 安装内核模块 > wireguard-go\n\t • 支持 WARP Linux Socks5 Client\n\t • 输出执行结果，提示是否使用 WARP IP ，IP 归属地和线路提供商\n"
E[17]="Version"
C[17]="脚本版本"
E[18]="New features"
C[18]="功能新增"
E[19]="System infomation"
C[19]="系统信息"
E[20]="Operating System"
C[20]="当前操作系统"
E[21]="Kernel"
C[21]="内核"
E[22]="Architecture"
C[22]="处理器架构"
E[23]="Virtualization"
C[23]="虚拟化"
E[24]="Client is on"
C[24]="Client 已开启"
E[25]="Device name"
C[25]="设备名"
E[26]="Curren operating system is \$SYS.\\\n The system lower than \$SYSTEM \${MAJOR[int]} is not supported. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[26]="当前操作是 \$SYS\\\n 不支持 \$SYSTEM \${MAJOR[int]} 以下系统,问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[27]="Local Socks5"
C[27]="本地 Socks5"
E[28]="If there is a WARP+ License, please enter it, otherwise press Enter to continue:"
C[28]="如有 WARP+ License 请输入，没有可回车继续:"
E[29]="Input errors up to 5 times.The script is aborted."
C[29]="输入错误达5次，脚本退出"
E[30]="License should be 26 characters, please re-enter WARP+ License. Otherwise press Enter to continue. \(\${i} times remaining\):"
C[30]="License 应为26位字符，请重新输入 WARP+ License，没有可回车继续\(剩余\${i}次\):"
E[31]="The new \$KEY_LICENSE is the same as the one currently in use. Does not need to be replaced."
C[31]="新输入的 \$KEY_LICENSE 与现使用中的一样，不需要更换。"
E[32]="Step 1/3: Install dependencies..."
C[32]="进度 1/3: 安装系统依赖……"
E[33]="Step 2/3: WARP is ready"
C[33]="进度 2/3: 已安装 WARP"
E[34]="Failed to change port. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[34]="更换端口不成功，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[35]="Update WARP+ account..."
C[35]="升级 WARP+ 账户中……"
E[36]="The upgrade failed, License: \$LICENSE has been activated on more than 5 devices. It script will remain the same account or be switched to a free account."
C[36]="升级失败，License: \$LICENSE 已激活超过5台设备，将保持原账户或者转为免费账户"
E[37]="Checking VPS infomation..."
C[37]="检查环境中……"
E[38]="Create shortcut [warp] successfully"
C[38]="创建快捷 warp 指令成功"
E[39]="Running WARP"
C[39]="运行 WARP"
E[40]="\$COMPANY vps needs to restart and run [warp n] to open WARP."
C[40]="\$COMPANY vps 需要重启后运行 warp n 才能打开 WARP,现执行重启"
E[41]="Congratulations! WARP\$TYPE is turned on. Spend time:\$(( end - start )) seconds.\\\n The script runs today: \$TODAY. Total:\$TOTAL"
C[41]="恭喜！WARP\$TYPE 已开启，总耗时:\$(( end - start ))秒， 脚本当天运行次数:\$TODAY，累计运行次数:\$TOTAL"
E[42]="The upgrade failed, License: \$LICENSE could not update to WARP+. The script will remain the same account or be switched to a free account."
C[42]="升级失败，License: \$LICENSE 不能升级为 WARP+，将保持原账户或者转为免费账户。"
E[43]="Run again with warp [option] [lisence], such as"
C[43]="再次运行用 warp [option] [lisence]，如"
E[44]="WARP installation failed. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[44]="WARP 安装失败，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[45]="WARP interface, Linux Client and Wireproxy have been completely deleted!"
C[45]="WARP 网络接口、 Linux Client 和 Wireproxy 已彻底删除!"
E[46]="Not cleaned up, please reboot and try again."
C[46]="没有清除干净，请重启(reboot)后尝试再次删除"
E[47]="Upgrade kernel, turn on BBR, change Linux system by other authors [ylx2016],[https://github.com/ylx2016/Linux-NetSpeed]"
C[47]="BBR、DD脚本用的[ylx2016]的成熟作品，地址[https://github.com/ylx2016/Linux-NetSpeed]，请熟知"
E[48]="Run script"
C[48]="安装脚本"
E[49]="Return to main menu"
C[49]="回退主目录"
E[50]="Choose:"
C[50]="请选择:"
E[51]="Please enter the correct number"
C[51]="请输入正确数字"
E[52]="Please input WARP+ ID:"
C[52]="请输入 WARP+ ID:"
E[53]="WARP+ ID should be 36 characters, please re-enter \(\${i} times remaining\):"
C[53]="WARP+ ID 应为36位字符，请重新输入 \(剩余\${i}次\):"
E[54]="Getting the WARP+ quota by the following 3 authors:\n • [ALIILAPRO]，[https://github.com/ALIILAPRO/warp-plus-cloudflare]\n • [mixool]，[https://github.com/mixool/across/tree/master/wireguard]\n • [SoftCreatR]，[https://github.com/SoftCreatR/warp-up]\n • Open the 1.1.1.1 app\n • Click on the hamburger menu button on the top-right corner\n • Navigate to: Account > Key\n Important:Refresh WARP+ quota: 三 --> Advanced --> Connection options --> Reset keys\n It is best to run script with screen."
C[54]="刷 WARP+ 流量用可选择以下三位作者的成熟作品，请熟知:\n • [ALIILAPRO]，地址[https://github.com/ALIILAPRO/warp-plus-cloudflare]\n • [mixool]，地址[https://github.com/mixool/across/tree/master/wireguard]\n • [SoftCreatR]，地址[https://github.com/SoftCreatR/warp-up]\n 下载地址:https://1.1.1.1/，访问和苹果外区 ID 自理\n 获取 WARP+ ID 填到下面。方法:App右上角菜单 三 --> 高级 --> 诊断 --> ID\n 重要:刷脚本后流量没有增加处理:右上角菜单 三 --> 高级 --> 连接选项 --> 重置加密密钥\n 最好配合 screen 在后台运行任务"
E[55]="1. Run [ALIILAPRO] script\n 2. Run [mixool] script\n 3. Run [SoftCreatR] script"
C[55]="1. 运行 [ALIILAPRO] 脚本\n 2. 运行 [mixool] 脚本\n 3. 运行 [SoftCreatR] 脚本"
E[56]="The current Netflix region is \$REGION. Confirm press [y] . If you want another regions, please enter the two-digit region abbreviation. \(such as hk,sg. Default is \$REGION\):"
C[56]="当前 Netflix 地区是:\$REGION，需要解锁当前地区请按 [y], 如需其他地址请输入两位地区简写 \(如 hk ,sg，默认:\$REGION\):"
E[57]="The target quota you want to get. The unit is GB, the default value is 10:"
C[57]="你希望获取的目标流量值，单位为 GB，输入数字即可，默认值为10:"
E[58]="Local network interface: CloudflareWARP"
C[58]="本地网络接口: CloudflareWARP"
E[59]="Cannot find the account file: /etc/wireguard/warp-account.conf, you can reinstall with the WARP+ License"
C[59]="找不到账户文件:/etc/wireguard/warp-account.conf，可以卸载后重装，输入 WARP+ License"
E[60]="Cannot find the configuration file: /etc/wireguard/warp.conf, you can reinstall with the WARP+ License"
C[60]="找不到配置文件: /etc/wireguard/warp.conf，可以卸载后重装，输入 WARP+ License"
E[61]="Please Input WARP+ license:"
C[61]="请输入WARP+ License:"
E[62]="Successfully change to a WARP\$TYPE account"
C[62]="已变更为 WARP\$TYPE 账户"
E[63]="WARP+ quota"
C[63]="剩余流量"
E[64]="Successfully synchronized the latest version"
C[64]="成功！已同步最新脚本，版本号"
E[65]="Upgrade failed. Feedback:[https://github.com/fscarmen/warp-sh/issues]"
C[65]="升级失败，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[66]="Add WARP IPv4 interface to \${NATIVE[n]} VPS \(bash menu.sh 4\)"
C[66]="为 \${NATIVE[n]} 添加 WARP IPv4 网络接口 \(bash menu.sh 4\)"
E[67]="Add WARP IPv6 interface to \${NATIVE[n]} VPS \(bash menu.sh 6\)"
C[67]="为 \${NATIVE[n]} 添加 WARP IPv6 网络接口 \(bash menu.sh 6\)"
E[68]="Add WARP dualstack interface to \${NATIVE[n]} VPS \(bash menu.sh d\)"
C[68]="为 \${NATIVE[n]} 添加 WARP 双栈网络接口 \(bash menu.sh d\)"
E[69]="Native dualstack"
C[69]="原生双栈"
E[70]="WARP dualstack"
C[70]="WARP 双栈"
E[71]="Turn on WARP (warp o)"
C[71]="打开 WARP (warp o)"
E[72]="Turn off, uninstall WARP interface, Linux Client and WireProxy (warp u)"
C[72]="永久关闭 WARP 网络接口，并删除 WARP、 Linux Client 和 WireProxy (warp u)"
E[73]="Upgrade kernel, turn on BBR, change Linux system (warp b)"
C[73]="升级内核、安装BBR、DD脚本 (warp b)"
E[74]="Getting WARP+ quota by scripts (warp p)"
C[74]="刷 WARP+ 流量 (warp p)"
E[75]="Sync the latest version (warp v)"
C[75]="同步最新版本 (warp v)"
E[76]="Exit"
C[76]="退出脚本"
E[77]="Turn off WARP (warp o)"
C[77]="暂时关闭 WARP (warp o)"
E[78]="Change the WARP account type (warp a)"
C[78]="变更 WARP 账户 (warp a)"
E[79]="Do you uninstall the following dependencies \(if any\)? Please note that this will potentially prevent other programs that are using the dependency from working properly.\\\n\\\n \$UNINSTALL_DEPENDENCIES_LIST"
C[79]="是否卸载以下依赖\(如有\)？请注意，这将有可能使其他正在使用该依赖的程序不能正常工作\\\n\\\n \$UNINSTALL_DEPENDENCIES_LIST"
E[80]="Professional one-click script for WARP to unblock streaming media (Supports multi-platform, multi-mode and TG push)"
C[80]="WARP 解锁 Netflix 等流媒体专业一键(支持多平台、多方式和 TG 通知)"
E[81]="Step 3/3: Searching for the best MTU value and endpoint address are ready."
C[81]="进度 3/3: 寻找 MTU 最优值和优选 endpoint 地址已完成"
E[82]="Install CloudFlare Client and set mode to Proxy (bash menu.sh c)"
C[82]="安装 CloudFlare Client 并设置为 Proxy 模式 (bash menu.sh c)"
E[83]="Step 1/2: Installing WARP Client..."
C[83]="进度 1/2: 安装 Client……"
E[84]="Step 2/2: Setting Client Mode"
C[84]="进度 2/2: 设置 Client 模式"
E[85]="Client was installed.\n connect/disconnect by [warp r].\n uninstall by [warp u]"
C[85]="Linux Client 已安装\n 连接/断开: warp r\n 卸载: warp u"
E[86]="Client is working. Socks5 proxy listening on: \$(ss -nltp | grep -E 'warp|wireproxy' | awk '{print \$4}')"
C[86]="Linux Client 正常运行中。 Socks5 代理监听:\$(ss -nltp | grep -E 'warp|wireproxy' | awk '{print \$4}')"
E[87]="Fail to establish Socks5 proxy. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[87]="创建 Socks5 代理失败，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[88]="Connect the client (warp r)"
C[88]="连接 Client (warp r)"
E[89]="Disconnect the client (warp r)"
C[89]="断开 Client (warp r)"
E[90]="Client is connected"
C[90]="Client 已连接"
E[91]="Client is disconnected. It could be connect again by [warp r]"
C[91]="已断开 Client，再次连接可以用 warp r"
E[92]="(!!! Already installed, do not select.)"
C[92]="(!!! 已安装，请勿选择)"
E[93]="Client is not installed."
C[93]="Client 未安装"
E[94]="Congratulations! WARP\$CLIENT_AC Linux Client is working. Spend time:\$(( end - start )) seconds.\\\n The script runs on today: \$TODAY. Total:\$TOTAL"
C[94]="恭喜！WARP\$CLIENT_AC Linux Client 工作中, 总耗时:\$(( end - start ))秒， 脚本当天运行次数:\$TODAY，累计运行次数:\$TOTAL"
E[95]="The account type is Teams and does not support changing IP\n 1. Change to free (default)\n 2. Change to plus\n 3. Quit"
C[95]="账户类型为 Teams，不支持更换 IP\n 1. 更换为 free (默认)\n 2. 更换为 plus\n 3. 退出"
E[96]="Client connecting failure. It may be a CloudFlare IPv4."
C[96]="Client 连接失败，可能是 CloudFlare IPv4."
E[97]="IPv\$PRIO priority"
C[97]="IPv\$PRIO 优先"
E[98]="Uninstall Wireproxy was complete."
C[98]="Wireproxy 卸载成功"
E[99]="WireProxy is connected"
C[99]="WireProxy 已连接"
E[100]="License should be 26 characters, please re-enter WARP+ License. Otherwise press Enter to continue. \(\${i} times remaining\): "
C[100]="License 应为26位字符,请重新输入 WARP+ License \(剩余\${i}次\): "
E[101]="Client support amd64 only. Curren architecture \$ARCHITECTURE. Official Support List: [https://pkg.cloudflareclient.com/packages/cloudflare-warp]. The script is aborted. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[101]="Client 只支持 amd64 架构，当前架构 \$ARCHITECTURE，官方支持列表: [https://pkg.cloudflareclient.com/packages/cloudflare-warp]。脚本中止，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[102]="Please customize the WARP+ device name \(Default is \$(hostname)\):"
C[102]="请自定义 WARP+ 设备名 \(默认为 \$(hostname)\):"
E[103]="Port \$PORT is in use. Please input another Port\(\${i} times remaining\):"
C[103]="\$PORT 端口占用中，请使用另一端口\(剩余\${i}次\):"
E[104]="Please customize the Client port (1000-65535. Default to 40000 if it is blank):"
C[104]="请自定义 Client 端口号 (1000-65535，如果不输入，会默认40000):"
E[105]="Please choose the priority:\n 1. IPv4\n 2. IPv6\n 3. Use initial settings (default)"
C[105]="请选择优先级别:\n 1. IPv4\n 2. IPv6\n 3. 使用 VPS 初始设置 (默认)"
E[106]="Shared free accounts cannot be upgraded to WARP+ accounts."
C[106]="共享免费账户不能升级为 WARP+ 账户"
E[107]="Failed registration, using a preset free account."
C[107]="注册失败，使用预设的免费账户"
E[108]="\n 1. WARP Linux Client IP\n 2. WARP WARP IP ( Only IPv6 can be brushed when WARP and Client exist at the same time )\n"
C[108]="\n 1. WARP Linux Client IP\n 2. WARP WARP IP ( WARP 和 Client 并存时只能刷 IPv6)\n"
E[109]="Socks5 Proxy Client is working now. WARP IPv4 and dualstack interface could not be switch to. The script is aborted. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[109]="Socks5 代理正在运行中，不能转为 WARP IPv4 或者双栈网络接口，脚本中止，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[110]="Socks5 Proxy Client is working now. WARP IPv4 and dualstack interface could not be installed. The script is aborted. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[110]="Socks5 代理正在运行中，WARP IPv4 或者双栈网络接口不能安装，脚本中止，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[111]="Port must be 1000-65535. Please re-input\(\${i} times remaining\):"
C[111]="端口必须为 1000-65535，请重新输入\(剩余\${i}次\):"
E[112]="Client is not installed."
C[112]="Client 未安装"
E[113]="Client is installed. Disconnected."
C[113]="Client 已安装， 断开状态"
E[114]="WARP\$TYPE Interface is on"
C[114]="WARP\$TYPE 网络接口已开启"
E[115]="WARP Interface is on"
C[115]="WARP 网络接口已开启"
E[116]="WARP Interface is off"
C[116]="WARP 网络接口未开启"
E[117]="Uninstall WARP Interface was complete."
C[117]="WARP 网络接口卸载成功"
E[118]="Uninstall WARP Interface was fail."
C[118]="WARP 网络接口卸载失败"
E[119]="Uninstall Socks5 Proxy Client was complete."
C[119]="Socks5 Proxy Client 卸载成功"
E[120]="Uninstall Socks5 Proxy Client was fail."
C[120]="Socks5 Proxy Client 卸载失败"
E[121]="Changing Netflix IP is adapted from other authors [luoxue-bot],[https://github.com/luoxue-bot/warp_auto_change_ip]"
C[121]="更换支持 Netflix IP 改编自 [luoxue-bot] 的成熟作品，地址[https://github.com/luoxue-bot/warp_auto_change_ip]，请熟知"
E[122]="Port change to \$PORT succeeded."
C[122]="端口成功更换至 \$PORT"
E[123]="Change the WARP IP to support Netflix (warp i)"
C[123]="更换支持 Netflix 的 IP (warp i)"
E[124]="1. Brush WARP IPv4 (default)\n 2. Brush WARP IPv6"
C[124]="1. 刷 WARP IPv4 (默认)\n 2. 刷 WARP IPv6"
E[125]="\$(date +'%F %T') Region: \$REGION Done. IPv\$NF: \$WAN \$COUNTRY \$ASNORG. Retest after 1 hour. Brush ip runing time:\$DAY days \$HOUR hours \$MIN minutes \$SEC seconds"
C[125]="\$(date +'%F %T') 区域 \$REGION 解锁成功，IPv\$NF: \$WAN \$COUNTRY \$ASNORG，1 小时后重新测试，刷 IP 运行时长: \$DAY 天 \$HOUR 时 \$MIN 分 \$SEC 秒"
E[126]="\$(date +'%F %T') Try \${i}. Failed. IPv\$NF: \$WAN \$COUNTRY \$ASNORG. Retry after \${j} seconds. Brush ip runing time:\$DAY days \$HOUR hours \$MIN minutes \$SEC seconds"
C[126]="\$(date +'%F %T') 尝试第\${i}次，解锁失败，IPv\$NF: \$WAN \$COUNTRY \$ASNORG，\${j}秒后重新测试，刷 IP 运行时长: \$DAY 天 \$HOUR 时 \$MIN 分 \$SEC 秒"
E[127]="1. with URL file\n 2. with token (Easily available at https://web--public--warp-team-api--coia-mfs4.code.run)\n 3. manual input private key, IPv6 and Client id\n 4. share teams account (default)"
C[127]="1. 通过在线文件\n 2. 使用 token (可通过 https://web--public--warp-team-api--coia-mfs4.code.run 轻松获取)\n 3. 手动输入 private key， IPv6 和 Client id\n 4. 共享 teams 账户 (默认)"
E[128]="Token has expired, please re-enter:"
C[128]="Token 已超时失效，请重新输入:"
E[129]="The current Teams account is unavailable, automatically switch back to the free account"
C[129]="当前 Teams 账户不可用，自动切换回免费账户"
E[130]="Please confirm\\\n Private key\\\t: \$PRIVATEKEY \${MATCH[0]}\\\n Address IPv6\\\t: \$ADDRESS6/128 \${MATCH[1]}\\\n Client id\\\t: \$CLIENT_ID \${MATCH[2]}"
C[130]="请确认Teams 信息\\\n Private key\\\t: \$PRIVATEKEY \${MATCH[0]}\\\n Address IPv6\\\t: \$ADDRESS6/128 \${MATCH[1]}\\\n Client id\\\t: \$CLIENT_ID \${MATCH[2]}"
E[131]="comfirm please enter [y] , and other keys to use free account:"
C[131]="确认请按 [y]，其他按键则使用免费账户:"
E[132]="Is there a WARP+ or Teams account?\n 1. Use free account (default)\n 2. WARP+\n 3. Teams"
C[132]="如有 WARP+ 或 Teams 账户请选择\n 1. 使用免费账户 (默认)\n 2. WARP+\n 3. Teams"
E[133]="Device name: \$(grep -s 'Device name' /etc/wireguard/info.log | awk '{ print \$NF }')\\\n Quota: \$QUOTA"
C[133]="设备名: \$(grep -s 'Device name' /etc/wireguard/info.log | awk '{ print \$NF }')\\\n 剩余流量: \$QUOTA"
E[134]="Curren architecture \$(uname -m) is not supported. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[134]="当前架构 \$(uname -m) 暂不支持,问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[135]="( match √ )"
C[135]="( 符合 √ )"
E[136]="( mismatch X )"
C[136]="( 不符合 X )"
E[137]="Cannot find the configuration file: /etc/wireguard/warp.conf. You should install WARP first"
C[137]="找不到配置文件 /etc/wireguard/warp.conf，请先安装 WARP"
E[138]="Install iptable + dnsmasq + ipset. Let WARP only take over the streaming media traffic (Not available for ipv6 only) (bash menu.sh e)"
C[138]="安装 iptable + dnsmasq + ipset，让 WARP IPv4 only 接管流媒体流量 (不适用于 IPv6 only VPS) (bash menu.sh e)"
E[139]="Through Iptable + dnsmasq + ipset, minimize the realization of media unblocking such as chatGPT, Netflix, WARP IPv4 only takes over the streaming media traffic,adapted from the mature works of [Anemone],[https://github.com/acacia233/Project-WARP-Unlock]"
C[139]="通过 Iptable + dnsmasq + ipset，最小化实现 chatGPT，Netflix 等媒体解锁，WARP IPv4 只接管流媒体流量，改编自 [Anemone] 的成熟作品，地址[https://github.com/acacia233/Project-WARP-Unlock]，请熟知"
E[140]="Socks5 Proxy Client on IPv4 VPS is working now. WARP IPv6 interface could not be installed. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[140]="IPv4 only VPS，并且 Socks5 代理正在运行中，不能安装 WARP IPv6 网络接口，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[141]="Switch \${WARP_BEFORE[m]} to \${WARP_AFTER1[m]} \${SHORTCUT1[m]}"
C[141]="\${WARP_BEFORE[m]} 转为 \${WARP_AFTER1[m]} \${SHORTCUT1[m]}"
E[142]="Switch \${WARP_BEFORE[m]} to \${WARP_AFTER2[m]} \${SHORTCUT2[m]}"
C[142]="\${WARP_BEFORE[m]} 转为 \${WARP_AFTER2[m]} \${SHORTCUT2[m]}"
E[143]="Change Client or WireProxy port"
C[143]="更改 Client 或 WireProxy 端口"
E[144]="Install WARP IPv6 interface"
C[144]="安装 WARP IPv6 网络接口"
E[145]="Client is only supported on CentOS 8 and above. Official Support List: [https://pkg.cloudflareclient.com]. The script is aborted. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[145]="Client 只支持 CentOS 8 或以上系统，官方支持列表: [https://pkg.cloudflareclient.com]。脚本中止，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
E[146]="Cannot switch to the same form as the current one."
C[146]="不能切换为当前一样的形态"
E[147]="Not available for IPv6 only VPS"
C[147]="IPv6 only VPS 不能使用此方案"
E[148]="Install wireproxy. Wireguard client that exposes itself as a socks5 proxy or tunnels (bash menu.sh w)"
C[148]="安装 wireproxy，让 WARP 在本地创建一个 socks5 代理 (bash menu.sh w)"
E[149]="Congratulations! Wireproxy is working. Spend time:\$(( end - start )) seconds.\\\n The script runs on today: \$TODAY. Total:\$TOTAL"
C[149]="恭喜！Wireproxy 工作中, 总耗时:\$(( end - start ))秒， 脚本当天运行次数:\$TODAY，累计运行次数:\$TOTAL"
E[150]="WARP, WARP Linux Client, WireProxy hasn't been installed yet. The script is aborted.\n"
C[150]="WARP, WARP Linux Client, WireProxy 均未安装，脚本退出\n"
E[151]="1. WARP Linux Client account\n 2. WireProxy account"
C[151]="1. WARP Linux Client 账户\n 2. WireProxy 账户"
E[152]="1. WARP account\n 2. WireProxy account"
C[152]="1. WARP 账户\n 2. WireProxy 账户"
E[153]="1. WARP account\n 2. WARP Linux Client account"
C[153]="1. WARP 账户\n 2. WARP Linux Client 账户"
E[154]="1. WARP account\n 2. WARP Linux Client account\n 3. WireProxy account"
C[154]="1. WARP 账户\n 2. WARP Linux Client 账户\n 3. WireProxy 账户"
E[155]="WARP has not been installed yet."
C[155]="WARP 还未安装"
E[156]="(!!! AMD64 only, do not select.)"
C[156]="(!!! 只支持 AMD64，请勿选择)"
E[157]="WireProxy has not been installed yet."
C[157]="WireProxy 还未安装"
E[158]="WireProxy is disconnected. It could be connect again by [warp y]"
C[158]="已断开 Wireproxy，再次连接可以用 warp y"
E[159]="WireProxy is on"
C[159]="WireProxy 已开启"
E[160]="WireProxy is not installed."
C[160]="WireProxy 未安装"
E[161]="WireProxy is installed and disconnected"
C[161]="WireProxy 已安装，状态为断开连接"
E[162]="Token is invalid, please re-enter:"
C[162]="Token 无效，请重新输入:"
E[163]="Connect the Wireproxy (warp y)"
C[163]="连接 Wireproxy (warp y)"
E[164]="Disconnect the Wireproxy (warp y)"
C[164]="断开 Wireproxy (warp y)"
E[165]="WireProxy Solution. A wireguard client that exposes itself as a socks5 proxy or tunnels. Adapted from the mature works of [pufferffish],[https://github.com/pufferffish/wireproxy]"
C[165]="WireProxy，让 WARP 在本地建议一个 socks5 代理。改编自 [pufferffish] 的成熟作品，地址[https://github.com/pufferffish/wireproxy]，请熟知"
E[166]="WireProxy was installed.\n connect/disconnect by [warp y]\n uninstall by [warp u]"
C[166]="WireProxy 已安装\n 连接/断开: warp y\n 卸载: warp u"
E[167]="WARP iptable was installed.\n connect/disconnect by [warp o]\n uninstall by [warp u]"
C[167]="WARP iptable 已安装\n 连接/断开: warp o\n 卸载: warp u"
E[168]="Install CloudFlare Client and set mode to WARP (bash menu.sh l)"
C[168]="安装 CloudFlare Client 并设置为 WARP 模式 (bash menu.sh l)"
E[169]="Invalid license. It will remain the same account or be switched to a free account."
C[169]="License 无效，将保持原账户或者转为免费账户"
E[170]="Confirm all uninstallation please press [y], other keys do not uninstall by default:"
C[170]="确认全部卸载请按 [y]，其他键默认不卸载:"
E[171]="Uninstall dependencies were complete."
C[171]="依赖卸载成功"
E[172]="No suitable solution was found for modifying the warp configuration file warp.conf and the script aborted. When you see this message, please send feedback on the bug to:[https://github.com/fscarmen/warp-sh/issues]"
C[172]="没有找到适合的方案用于修改 warp 配置文件 warp.conf，脚本中止。当你看到此信息，请把该 bug 反馈至:[https://github.com/fscarmen/warp-sh/issues]"
E[173]="Current account type is: WARP \$ACCOUNT_TYPE\\\n \$PLUS_QUOTA\\\n \$CHANGE_TYPE"
C[173]="当前账户类型是: WARP \$ACCOUNT_TYPE\\\n \$PLUS_QUOTA\\\n \$CHANGE_TYPE"
E[174]="1. Continue using the free account without changing.\n 2. Change to WARP+ account.\n 3. Change to Teams account."
C[174]="1. 继续使用 free 账户，不变更\n 2. 变更为 WARP+ 账户\n 3. 变更为 Teams 账户"
E[175]="1. Change to free account.\n 2. Change to WARP+ account.\n 3. Change to another WARP Teams account."
C[175]="1. 变更为 free 账户\n 2. 变更为 WARP+ 账户\n 3. 更换为另一个 Teams 账户"
E[176]="1. Change to free account.\n 2. Change to another WARP+ account.\n 3. Change to Teams account."
C[176]="1. 变更为 free 账户\n 2. 变更为另一个 WARP+ 账户\n 3. 变更为 Teams 账户"
E[177]="1. Continue using the free account without changing.\n 2. Change to WARP+ account."
C[177]="1. 继续使用 free 账户，不变更\n 2. 变更为 WARP+ 账户"
E[178]="1. Change to free account.\n 2. Change to another WARP+ account."
C[178]="1. 变更为 free 账户\n 2. 变更为另一个 WARP+ 账户"
E[179]="Can only be run using \$KERNEL_OR_WIREGUARD_GO ."
C[179]="只能使用 \$KERNEL_OR_WIREGUARD_GO 运行"
E[180]="Install using:\n 1. wireguard kernel (default)\n 2. wireguard-go with reserved"
C[180]="请选择 wireguard 方式:\n 1. wireguard 内核 (默认)\n 2. wireguard-go with reserved"
E[181]="\${WIREGUARD_BEFORE} ---\> \${WIREGUARD_AFTER}. Confirm press [y] :"
C[181]="\${WIREGUARD_BEFORE} ---\> \${WIREGUARD_AFTER}， 确认请按 [y] :"
E[182]="Working mode:\n 1. Global (default)\n 2. Non-global"
C[182]="工作模式:\n 1. 全局 (默认)\n 2. 非全局"
E[183]="\${MODE_BEFORE} ---\> \${MODE_AFTER}, Confirm press [y] :"
C[183]="\${MODE_BEFORE} ---\> \${MODE_AFTER}， 确认请按 [y] :"
E[184]="Global"
C[184]="全局"
E[185]="Non-global"
C[185]="非全局"
E[186]="Working mode: \$GLOBAL_OR_NOT"
C[186]="工作模式: \$GLOBAL_OR_NOT"
E[187]="Failed to change to \$ACCOUNT_CHANGE_FAILED account, automatically switch back to the original account."
C[187]="更换到 \$ACCOUNT_CHANGE_FAILED 账户失败，自动切换回原来的账户"
E[188]="All endpoints of WARP cannot be connected. Ask the supplier for more help. Feedback: [https://github.com/fscarmen/warp-sh/issues]"
C[188]="WARP 的所有的 endpoint 均不能连通，有可能 UDP 被限制了，可联系供应商了解如何开启，问题反馈:[https://github.com/fscarmen/warp-sh/issues]"
# 自定义字体彩色，read 函数
warning() { echo -e "\033[31m\033[01m$*\033[0m"; } # 红色
error() { echo -e "\033[31m\033[01m$*\033[0m" && exit 1; } # 红色
info() { echo -e "\033[32m\033[01m$*\033[0m"; } # 绿色
hint() { echo -e "\033[33m\033[01m$*\033[0m"; } # 黄色
reading() { read -rp "$(info "$1")" "$2"; }
text() { grep -q '\$' <<< "${E[$*]}" && eval echo "\$(eval echo "\${${L}[$*]}")" || eval echo "\${${L}[$*]}"; }
# 自定义谷歌翻译函数
translate() {
[ -n "$@" ] && EN="$@"
ZH=$(curl -km8 -sSL "https://translate.google.com/translate_a/t?client=any_client_id_works&sl=en&tl=zh&q=${EN//[[:space:]]/%20}" 2>/dev/null)
[[ "$ZH" =~ ^\[\".+\"\]$ ]] && cut -d \" -f2 <<< "$ZH"
}
# 脚本当天及累计运行次数统计
statistics_of_run-times() {
local COUNT=$(curl --retry 2 -ksm2 "https://hits.seeyoufarm.com/api/count/incr/badge.svg?url=https%3A%2F%2Fcdn.jsdelivr.net%2Fgh%2Ffscarmen%2Fwarp%2Fmenu.sh&count_bg=%2379C83D&title_bg=%23555555&icon=&icon_color=%23E7E7E7&title=&edge_flat=true" 2>&1 | grep -m1 -oE "[0-9]+[ ]+/[ ]+[0-9]+") &&
TODAY=$(cut -d " " -f1 <<< "$COUNT") &&
TOTAL=$(cut -d " " -f3 <<< "$COUNT")
}
# 选择语言，先判断 /etc/wireguard/language 里的语言选择，没有的话再让用户选择，默认英语。处理中文显示的问题
select_language() {
UTF8_LOCALE=$(locale -a 2>/dev/null | grep -iEm1 "UTF-8|utf8")
[ -n "$UTF8_LOCALE" ] && export LC_ALL="$UTF8_LOCALE" LANG="$UTF8_LOCALE" LANGUAGE="$UTF8_LOCALE"
case $(cat /etc/wireguard/language 2>&1) in
E )
L=E
;;
C )
L=C
;;
* )
L=E && [[ -z "$OPTION" || "$OPTION" = [aclehdpbviw46sg] ]] && hint " $(text 0) " && reading " $(text 50) " LANGUAGE
[ "$LANGUAGE" = 2 ] && L=C
esac
}
# 必须以root运行脚本
check_root_virt() {
[ "$(id -u)" != 0 ] && error " $(text 2) "
# 判断虚拟化
VIRT=$(systemd-detect-virt 2>/dev/null | tr 'A-Z' 'a-z')
[ -n "$VIRT" ] || VIRT=$(hostnamectl 2>/dev/null | tr 'A-Z' 'a-z' | grep virtualization | sed "s/.*://g")
}
# 随机使用 cdn 网址，以负载均衡
check_cdn() {
RANDOM_CDN=($(shuf -e "${CDN_URL[@]}"))
for CDN in "${RANDOM_CDN[@]}"; do
wget -T2 -qO- https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh | grep -q '#!/usr/bin/env' && break || unset CDN
done
}
# 多方式判断操作系统，试到有值为止。只支持 Debian 10/11、Ubuntu 18.04/20.04 或 CentOS 7/8 ,如非上述操作系统，退出脚本
# 感谢猫大的技术指导优化重复的命令。https://github.com/Oreomeow
check_operating_system() {
if [ -s /etc/os-release ]; then
SYS="$(grep -i pretty_name /etc/os-release | cut -d \" -f2)"
elif [ $(type -p hostnamectl) ]; then
SYS="$(hostnamectl | grep -i system | cut -d : -f2)"
elif [ $(type -p lsb_release) ]; then
SYS="$(lsb_release -sd)"
elif [ -s /etc/lsb-release ]; then
SYS="$(grep -i description /etc/lsb-release | cut -d \" -f2)"
elif [ -s /etc/redhat-release ]; then
SYS="$(grep . /etc/redhat-release)"
elif [ -s /etc/issue ]; then
SYS="$(grep . /etc/issue | cut -d '\' -f1 | sed '/^[ ]*$/d')"
fi
# 自定义 Alpine 系统若干函数
alpine_warp_restart() { wg-quick down warp >/dev/null 2>&1; wg-quick up warp >/dev/null 2>&1; }
alpine_warp_enable() { echo -e "/usr/bin/tun.sh\nwg-quick up warp" > /etc/local.d/warp.start; chmod +x /etc/local.d/warp.start; rc-update add local; wg-quick up warp >/dev/null 2>&1; }
REGEX=("debian" "ubuntu" "centos|red hat|kernel|oracle linux|alma|rocky" "amazon linux" "alpine" "arch linux" "fedora")
RELEASE=("Debian" "Ubuntu" "CentOS" "CentOS" "Alpine" "Arch" "Fedora")
EXCLUDE=("")
COMPANY=("" "" "" "amazon" "" "")
MAJOR=("9" "16" "7" "7" "3" "" "37")
PACKAGE_UPDATE=("apt -y update" "apt -y update" "yum -y update" "yum -y update" "apk update -f" "pacman -Sy" "dnf -y update")
PACKAGE_INSTALL=("apt -y install" "apt -y install" "yum -y install" "yum -y install" "apk add -f" "pacman -S --noconfirm" "dnf -y install")
PACKAGE_UNINSTALL=("apt -y autoremove" "apt -y autoremove" "yum -y autoremove" "yum -y autoremove" "apk del -f" "pacman -Rcnsu --noconfirm" "dnf -y autoremove")
SYSTEMCTL_START=("systemctl start wg-quick@warp" "systemctl start wg-quick@warp" "systemctl start wg-quick@warp" "systemctl start wg-quick@warp" "wg-quick up warp" "systemctl start wg-quick@warp" "systemctl start wg-quick@warp")
SYSTEMCTL_RESTART=("systemctl restart wg-quick@warp" "systemctl restart wg-quick@warp" "systemctl restart wg-quick@warp" "systemctl restart wg-quick@warp" "alpine_warp_restart" "systemctl restart wg-quick@warp" "systemctl restart wg-quick@warp")
SYSTEMCTL_ENABLE=("systemctl enable --now wg-quick@warp" "systemctl enable --now wg-quick@warp" "systemctl enable --now wg-quick@warp" "systemctl enable --now wg-quick@warp" "alpine_warp_enable" "systemctl enable --now wg-quick@warp" "systemctl enable --now wg-quick@warp")
for ((int=0; int<${#REGEX[@]}; int++)); do
[[ $(tr 'A-Z' 'a-z' <<< "$SYS") =~ ${REGEX[int]} ]] && SYSTEM="${RELEASE[int]}" && COMPANY="${COMPANY[int]}" && break
done
[ -z "$SYSTEM" ] && error " $(text 5) "
# 先排除 EXCLUDE 里包括的特定系统，其他系统需要作大发行版本的比较
for ex in "${EXCLUDE[@]}"; do [[ ! $(tr 'A-Z' 'a-z' <<< "$SYS") =~ $ex ]]; done &&
[[ "$(echo "$SYS" | sed "s/[^0-9.]//g" | cut -d. -f1)" -lt "${MAJOR[int]}" ]] && error " $(text 26) "
}
# 安装系统依赖及定义 ping 指令
check_dependencies() {
# 对于 alpine 系统，升级库并重新安装依赖
if [ "$SYSTEM" = Alpine ]; then
[ -e /etc/wireguard/menu.sh ] && ( ${PACKAGE_UPDATE[int]}; ${PACKAGE_INSTALL[int]} curl wget grep bash xxd python3 )
else
# 对于 CentOS 系统，xxd 需要依赖 vim-common
[ "${SYSTEM}" = 'CentOS' ] && ${PACKAGE_INSTALL[int]} vim-common
DEPS_CHECK=("ping" "xxd" "wget" "curl" "systemctl" "ip" "python3")
DEPS_INSTALL=("iputils-ping" "xxd" "wget" "curl" "systemctl" "iproute2" "python3")
for ((g=0; g<${#DEPS_CHECK[@]}; g++)); do [ ! $(type -p ${DEPS_CHECK[g]}) ] && [[ ! "${DEPS[@]}" =~ "${DEPS_INSTALL[g]}" ]] && DEPS+=(${DEPS_INSTALL[g]}); done
if [ "${#DEPS[@]}" -ge 1 ]; then
info "\n $(text 7) ${DEPS[@]} \n"
${PACKAGE_UPDATE[int]} >/dev/null 2>&1
${PACKAGE_INSTALL[int]} ${DEPS[@]} >/dev/null 2>&1
else
info "\n $(text 8) \n"
fi
fi
PING6='ping -6' && [ $(type -p ping6) ] && PING6='ping6'
}
# 只保留Teams账户，删除其他账户
cancel_account(){
local FILE=$1
if [ -s "$FILE" ]; then
grep -oqE '"id":[ ]+"t.[A-F0-9a-f]{8}-' $FILE || bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --cancle --file $FILE >/dev/null 2>&1
fi
}
# 聚合 IP api 函数
ip_info() {
local CHECK_46="$1"
if [[ "$2" =~ ^[0-9]+$ ]]; then
local INTERFACE_SOCK5="-x socks5://127.0.0.1:$2"
elif [[ "$2" =~ ^[[:alnum:]]+$ ]]; then
local INTERFACE_SOCK5="--interface $2"
fi
case "$CHECK_46" in
6 )
CHOOSE_IP_API=${IP_API[1]} && CHOOSE_IP_ISP=${ISP[1]} && CHOOSE_IP_KEY=${IP[1]}
;;
* )
CHOOSE_IP_API=${IP_API[0]} && CHOOSE_IP_ISP=${ISP[0]} && CHOOSE_IP_KEY=${IP[0]}
esac
IP_TRACE=$(curl --retry 2 -ks${CHECK_46}m5 $INTERFACE_SOCK5 ${IP_API[3]} | grep warp | sed "s/warp=//g")
if [ -n "$IP_TRACE" ]; then
IP_JSON=$(curl --retry 2 -ks${CHECK_46}m5 $INTERFACE_SOCK5 -A Mozilla $CHOOSE_IP_API)
[[ -z "$IP_JSON" || "$IP_JSON" =~ 'error code' ]] && CHOOSE_IP_API=${IP_API[2]} && CHOOSE_IP_ISP=${ISP[2]} && CHOOSE_IP_KEY=${IP[2]} && IP_JSON=$(curl --retry 3 -ks${CHECK_46}m5 $INTERFACE_SOCK5 -A Mozilla $CHOOSE_IP_API)
if [[ -n "$IP_JSON" && ! "$IP_JSON" =~ 'error code' ]]; then
local WAN=$(expr "$IP_JSON" : '.*'$CHOOSE_IP_KEY'\":[ ]*\"\([^"]*\).*')
local COUNTRY=$(expr "$IP_JSON" : '.*country\":[ ]*\"\([^"]*\).*')
local ASNORG=$(expr "$IP_JSON" : '.*'$CHOOSE_IP_ISP'\":[ ]*\"\([^"]*\).*')
fi
fi
echo -e "trace=$IP_TRACE@\nip=$WAN@\ncountry=$COUNTRY@\nasnorg=$ASNORG\n"
}
# 根据场景传参调用自定义 IP api
ip_case() {
local CHECK_46="$1"
[ -n "$2" ] && local CHECK_TYPE="$2"
[ "$3" = 'non-global' ] && local CHECK_NONGLOBAL='warp'
if [ "$CHECK_TYPE" = "warp" ]; then
fetch_4() {
unset IP_RESULT4 COUNTRY4 ASNORG4 TRACE4
local IP_RESULT4=$(ip_info 4 $CHECK_NONGLOBAL)
TRACE4=$(expr "$IP_RESULT4" : '.*trace=\([^@]*\).*')
WAN4=$(expr "$IP_RESULT4" : '.*ip=\([^@]*\).*')
COUNTRY4=$(expr "$IP_RESULT4" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$COUNTRY4" ] && COUNTRY4_ZH=$(translate "$COUNTRY4")
[ -n "$COUNTRY4_ZH" ] && COUNTRY4="$COUNTRY4_ZH"
ASNORG4=$(expr "$IP_RESULT4" : '.*asnorg=\([^@]*\).*')
}
fetch_6() {
unset IP_RESULT6 COUNTRY6 ASNORG6 TRACE6
local IP_RESULT6=$(ip_info 6 $CHECK_NONGLOBAL)
TRACE6=$(expr "$IP_RESULT6" : '.*trace=\([^@]*\).*')
WAN6=$(expr "$IP_RESULT6" : '.*ip=\([^@]*\).*')
COUNTRY6=$(expr "$IP_RESULT6" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$COUNTRY6" ] && COUNTRY6_ZH=$(translate "$COUNTRY6")
[ -n "$COUNTRY6_ZH" ] && COUNTRY6="$COUNTRY6_ZH"
ASNORG6=$(expr "$IP_RESULT6" : '.*asnorg=\([^@]*\).*')
}
case "$CHECK_46" in
4|6 )
fetch_$CHECK_46
;;
d )
# 如在非全局模式，根据 AllowedIPs 的 v4、v6 情况再查 ip 信息；如在全局模式下则全部查
if [ -e /etc/wireguard/warp.conf ] && grep -q '^Table' /etc/wireguard/warp.conf; then
grep -q "^#.*0\.\0\/0" 2>/dev/null /etc/wireguard/warp.conf || fetch_4
grep -q "^#.*\:\:\/0" 2>/dev/null /etc/wireguard/warp.conf || fetch_6
else
fetch_4
fetch_6
fi
esac
elif [ "$CHECK_TYPE" = "wireproxy" ]; then
fetch_4() {
unset IP_RESULT4 WIREPROXY_TRACE4 WIREPROXY_WAN4 WIREPROXY_COUNTRY4 WIREPROXY_ASNORG4 ACCOUNT QUOTA AC
local IP_RESULT4=$(ip_info 4 "$WIREPROXY_PORT")
WIREPROXY_TRACE4=$(expr "$IP_RESULT4" : '.*trace=\([^@]*\).*')
WIREPROXY_WAN4=$(expr "$IP_RESULT4" : '.*ip=\([^@]*\).*')
WIREPROXY_COUNTRY4=$(expr "$IP_RESULT4" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$WIREPROXY_COUNTRY4" ] && WIREPROXY_COUNTRY4_ZH=$(translate "$WIREPROXY_COUNTRY4")
[ -n "$WIREPROXY_COUNTRY4_ZH" ] && WIREPROXY_COUNTRY4="$WIREPROXY_COUNTRY4_ZH"
WIREPROXY_ASNORG4=$(expr "$IP_RESULT4" : '.*asnorg=\([^@]*\).*')
}
fetch_6() {
unset IP_RESULT6 WIREPROXY_TRACE6 WIREPROXY_WAN6 WIREPROXY_COUNTRY6 WIREPROXY_ASNORG6 ACCOUNT QUOTA AC
local IP_RESULT6=$(ip_info 6 "$WIREPROXY_PORT")
WIREPROXY_TRACE6=$(expr "$IP_RESULT6" : '.*trace=\([^@]*\).*')
WIREPROXY_WAN6=$(expr "$IP_RESULT6" : '.*ip=\([^@]*\).*')
WIREPROXY_COUNTRY6=$(expr "$IP_RESULT6" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$WIREPROXY_COUNTRY6" ] && WIREPROXY_COUNTRY6_ZH=$(translate "$WIREPROXY_COUNTRY6")
[ -n "$WIREPROXY_COUNTRY6_ZH" ] && WIREPROXY_COUNTRY6="$WIREPROXY_COUNTRY6_ZH"
WIREPROXY_ASNORG6=$(expr "$IP_RESULT6" : '.*asnorg=\([^@]*\).*')
}
unset WIREPROXY_SOCKS5 WIREPROXY_PORT
WIREPROXY_SOCKS5=$(ss -nltp | awk '/"wireproxy"/{print $4}')
WIREPROXY_PORT=$(cut -d: -f2 <<< "$WIREPROXY_SOCKS5")
case "$CHECK_46" in
4|6 )
fetch_$CHECK_46
WIREPROXY_ACCOUNT=' Free' && [ "$(eval echo "\$WIREPROXY_TRACE$CHECK_46")" = plus ] && [ -s /etc/wireguard/info.log ] && WIREPROXY_ACCOUNT=' Teams' && grep -sq 'Device name' /etc/wireguard/info.log && WIREPROXY_ACCOUNT='+' && check_quota warp
;;
d )
fetch_4
fetch_6
WIREPROXY_ACCOUNT=' Free' && [[ "$WIREPROXY_TRACE4$WIREPROXY_TRACE6" =~ 'plus' ]] && [ -s /etc/wireguard/info.log ] && WIREPROXY_ACCOUNT=' Teams' && grep -sq 'Device name' /etc/wireguard/info.log && WIREPROXY_ACCOUNT='+' && check_quota warp
esac
elif [ "$CHECK_TYPE" = "client" ]; then
fetch_4(){
unset IP_RESULT4 CLIENT_TRACE4 CLIENT_WAN4 CLIENT_COUNTRY4 CLIENT_ASNORG4 CLIENT_ACCOUNT QUOTA CLIENT_AC
local IP_RESULT4=$(ip_info 4 "$CLIENT_PORT")
CLIENT_TRACE4=$(expr "$IP_RESULT4" : '.*trace=\([^@]*\).*')
CLIENT_WAN4=$(expr "$IP_RESULT4" : '.*ip=\([^@]*\).*')
CLIENT_COUNTRY4=$(expr "$IP_RESULT4" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$CLIENT_COUNTRY4" ] && CLIENT_COUNTRY4_ZH=$(translate "$CLIENT_COUNTRY4")
[ -n "$CLIENT_COUNTRY4_ZH" ] && CLIENT_COUNTRY4="$CLIENT_COUNTRY4_ZH"
CLIENT_ASNORG4=$(expr "$IP_RESULT4" : '.*asnorg=\([^@]*\).*')
}
fetch_6(){
unset IP_RESULT6 CLIENT_TRACE6 CLIENT_WAN6 CLIENT_COUNTRY6 CLIENT_ASNORG6 CLIENT_ACCOUNT QUOTA CLIENT_AC
local IP_RESULT6=$(ip_info 6 "$CLIENT_PORT")
CLIENT_TRACE6=$(expr "$IP_RESULT6" : '.*trace=\([^@]*\).*')
CLIENT_WAN6=$(expr "$IP_RESULT6" : '.*ip=\([^@]*\).*')
CLIENT_COUNTRY6=$(expr "$IP_RESULT6" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$CLIENT_COUNTRY6" ] && CLIENT_COUNTRY6_ZH=$(translate "$CLIENT_COUNTRY6")
[ -n "$CLIENT_COUNTRY6_ZH" ] && CLIENT_COUNTRY6="$CLIENT_COUNTRY6_ZH"
CLIENT_ASNORG6=$(expr "$IP_RESULT6" : '.*asnorg=\([^@]*\).*')
}
unset CLIENT_SOCKS5 CLIENT_PORT
CLIENT_SOCKS5=$(ss -nltp | awk '/"warp-svc"/{print $4}')
CLIENT_PORT=$(cut -d: -f2 <<< "$CLIENT_SOCKS5")
case "$CHECK_46" in
4|6 )
fetch_$CHECK_46
CLIENT_AC=' Free'
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
;;
d )
fetch_4
fetch_6
CLIENT_AC=' Free'
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
esac
elif [ "$CHECK_TYPE" = "luban" ]; then
fetch_4(){
unset IP_RESULT4 CFWARP_COUNTRY4 CFWARP_ASNORG4 CFWARP_TRACE4 CFWARP_WAN4 CLIENT_ACCOUNT QUOTA CLIENT_AC
local IP_RESULT4=$(ip_info 4 CloudflareWARP)
CFWARP_TRACE4=$(expr "$IP_RESULT4" : '.*trace=\([^@]*\).*')
CFWARP_WAN4=$(expr "$IP_RESULT4" : '.*ip=\([^@]*\).*')
CFWARP_COUNTRY4=$(expr "$IP_RESULT4" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$CFWARP_COUNTRY4" ] && CFWARP_COUNTRY4_ZH=$(translate "$CFWARP_COUNTRY4")
[ -n "$CFWARP_COUNTRY4_ZH" ] && CFWARP_COUNTRY4="$CFWARP_COUNTRY4_ZH"
CFWARP_ASNORG4=$(expr "$IP_RESULT4" : '.*asnorg=\([^@]*\).*')
}
fetch_6(){
unset IP_RESULT6 CFWARP_COUNTRY6 CFWARP_ASNORG6 CFWARP_TRACE6 CFWARP_WAN6 CLIENT_ACCOUNT QUOTA CLIENT_AC
local IP_RESULT6=$(ip_info 6 CloudflareWARP)
CFWARP_TRACE6=$(expr "$IP_RESULT6" : '.*trace=\([^@]*\).*')
CFWARP_WAN6=$(expr "$IP_RESULT6" : '.*ip=\([^@]*\).*')
CFWARP_COUNTRY6=$(expr "$IP_RESULT6" : '.*country=\([^@]*\).*')
[ "$L" = C ] && [ -n "$CFWARP_COUNTRY6" ] && CFWARP_COUNTRY6_ZH=$(translate "$CFWARP_COUNTRY6")
[ -n "$CFWARP_COUNTRY6_ZH" ] && CFWARP_COUNTRY6="$CFWARP_COUNTRY6_ZH"
CFWARP_ASNORG6=$(expr "$IP_RESULT6" : '.*asnorg=\([^@]*\).*')
}
case "$CHECK_46" in
4|6 )
fetch_$CHECK_46
;;
d )
fetch_4
fetch_6
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
esac
fi
}
# 帮助说明
help() { hint " $(text 6) "; }
# 刷 WARP+ 流量
input() {
reading " $(text 52) " ID
i=5
until [[ "$ID" =~ ^[A-F0-9a-f]{8}-[A-F0-9a-f]{4}-[A-F0-9a-f]{4}-[A-F0-9a-f]{4}-[A-F0-9a-f]{12}$ ]]; do
(( i-- )) || true
[ "$i" = 0 ] && error " $(text 29) " || reading " $(text 53) " ID
done
}
plus() {
echo -e "\n==============================================================\n"
info " $(text 54) "
echo -e "\n==============================================================\n"
hint " $(text 55) "
[ "$OPTION" != p ] && hint " 0. $(text 49) \n" || hint " 0. $(text 76) \n"
reading " $(text 50) " CHOOSEPLUS
case "$CHOOSEPLUS" in
1 )
input
[ $(type -p git) ] || ${PACKAGE_INSTALL[int]} git 2>/dev/null
[ $(type -p python3) ] || ${PACKAGE_INSTALL[int]} python3 2>/dev/null
[ -d ~/warp-plus-cloudflare ] || git clone https://${CDN}github.com/aliilapro/warp-plus-cloudflare.git
echo "$ID" | python3 ~/warp-plus-cloudflare/wp-plus.py
;;
2 )
input
reading " $(text 57) " MISSION
MISSION=${MISSION//[^0-9]/}
bash <(wget --no-check-certificate -qO- -T8 https://${CDN}raw.githubusercontent.com/fscarmen/tools/main/warp_plus.sh) $MISSION $ID
;;
3 )
input
reading " $(text 57) " MISSION
MISSION=${MISSION//[^0-9]/}
bash <(wget --no-check-certificate -qO- -T8 https://${CDN}raw.githubusercontent.com/SoftCreatR/warp-up/main/warp-up.sh) --disclaimer --id $ID --iterations $MISSION
;;
0 )
[ "$OPTION" != p ] && menu || exit
;;
* )
warning " $(text 51) [0-3] "; sleep 1; plus
esac
}
# IPv4 / IPv6 优先设置
stack_priority() {
[ "$OPTION" = s ] && case "$PRIORITY_SWITCH" in
4 )
PRIORITY=1
;;
6 )
PRIORITY=2
;;
d )
:
;;
* )
hint "\n $(text 105) \n" && reading " $(text 50) " PRIORITY
esac
[ -e /etc/gai.conf ] && sed -i '/^precedence \:\:ffff\:0\:0/d;/^label 2002\:\:\/16/d' /etc/gai.conf
case "$PRIORITY" in
1 )
echo "precedence ::ffff:0:0/96 100" >> /etc/gai.conf
;;
2 )
echo "label 2002::/16 2" >> /etc/gai.conf
;;
esac
}
# IPv4 / IPv6 优先结果
result_priority() {
PRIO=(0 0)
if [ -e /etc/gai.conf ]; then
grep -qsE "^precedence[ ]+::ffff:0:0/96[ ]+100" /etc/gai.conf && PRIO[0]=1
grep -qsE "^label[ ]+2002::/16[ ]+2" /etc/gai.conf && PRIO[1]=1
fi
case "${PRIO[*]}" in
'1 0' )
PRIO=4
;;
'0 1' )
PRIO=6
;;
* )
[[ "$(curl -ksm8 -A Mozilla ${IP_API[3]} | grep 'ip=' | cut -d= -f2)" =~ ^([0-9]{1,3}\.){3} ]] && PRIO=4 || PRIO=6
esac
PRIORITY_NOW=$(text 97)
# 如是快捷方式切换优先级别的话，显示结果
[ "$OPTION" = s ] && hint "\n $PRIORITY_NOW \n"
}
# 更换 Netflix IP 时确认期望区域
input_region() {
[ -n "$NF" ] && REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" -$NF $GLOBAL -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
[ -n "$WIREPROXY_PORT" ] && REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" -sx socks5h://127.0.0.1:$WIREPROXY_PORT -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
[ -n "$INTERFACE" ] && REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" $INTERFACE -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
REGION=${REGION:-'US'}
reading " $(text 56) " EXPECT
until [[ -z "$EXPECT" || "$EXPECT" = [Yy] || "$EXPECT" =~ ^[A-Za-z]{2}$ ]]; do
reading " $(text 56) " EXPECT
done
[[ -z "$EXPECT" || "$EXPECT" = [Yy] ]] && EXPECT="$REGION"
}
# 更换支持 Netflix WARP IP 改编自 [luoxue-bot] 的成熟作品，地址[https://github.com/luoxue-bot/warp_auto_change_ip]
change_ip() {
change_stack() {
hint "\n $(text 124) \n" && reading " $(text 50) " NETFLIX
NF='4' && [ "$NETFLIX" = 2 ] && NF='6'
}
change_warp() {
warp_restart() {
warning " $(text 126) "
wg-quick down warp >/dev/null 2>&1
[ -s /etc/wireguard/info.log ] && grep -q 'Device name' /etc/wireguard/info.log && local LICENSE=$(cat /etc/wireguard/license) && local NAME=$(awk '/Device name/{print $NF}' /etc/wireguard/info.log)
cancel_account /etc/wireguard/warp-account.conf
bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh | sed 's#cat $registe_path; ##') --registe --file /etc/wireguard/warp-account.conf 2>/dev/null
# 如原来是 plus 账户，以相同的 license 升级，并修改账户和 warp 配置文件
if [[ -n "$LICENSE" && -n "$NAME" ]]; then
[ -n "$LICENSE" ] && bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --license $LICENSE >/dev/null 2>&1
[ -n "$NAME" ] && bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --name $NAME >/dev/null 2>&1
local PRIVATEKEY="$(grep 'private_key' /etc/wireguard/warp-account.conf | cut -d\" -f4)"
local ADDRESS6="$(grep '"v6.*"$' /etc/wireguard/warp-account.conf | cut -d\" -f4)"
local CLIENT_ID="$(reserved_and_clientid /etc/wireguard/warp-account.conf file)"
[ -s /etc/wireguard/warp.conf ] && sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g; s#\(.*Reserved[ ]\+=[ ]\+\).*#\1$CLIENT_ID#g" /etc/wireguard/warp.conf
sed -i "s#\([ ]\+\"license\": \"\).*#\1$LICENSE\"#g; s#\"account_type\".*#\"account_type\": \"limited\",#g; s#\([ ]\+\"name\": \"\).*#\1$NAME\"#g" /etc/wireguard/warp-account.conf
fi
ss -nltp | grep dnsmasq >/dev/null 2>&1 && systemctl restart dnsmasq >/dev/null 2>&1
wg-quick up warp >/dev/null 2>&1
sleep $j
}
# 检测账户类型为 Team 的不能更换
if [ -e /etc/wireguard/info.log ] && ! grep -q 'Device name' /etc/wireguard/info.log; then
hint "\n $(text 95) \n" && reading " $(text 50) " CHANGE_ACCOUNT
case "$CHANGE_ACCOUNT" in
2 )
UPDATE_ACCOUNT=warp
change_to_plus
;;
3 )
exit 0
;;
* )
UPDATE_ACCOUNT=warp
change_to_free
esac
fi
unset T4 T6
grep -q "^#.*0\.\0\/0" 2>/dev/null /etc/wireguard/warp.conf && T4=0 || T4=1
grep -q "^#.*\:\:\/0" 2>/dev/null /etc/wireguard/warp.conf && T6=0 || T6=1
case "$T4$T6" in
01 )
NF='6'
;;
10 )
NF='4'
;;
11 )
change_stack
esac
# 检测[全局]或[非全局]
grep -q '^Table' /etc/wireguard/warp.conf && GLOBAL='--interface warp'
[ -z "$EXPECT" ] && input_region
i=0; j=10
while true; do
(( i++ )) || true
ip_now=$(date +%s); RUNTIME=$((ip_now - ip_start)); DAY=$(( RUNTIME / 86400 )); HOUR=$(( (RUNTIME % 86400 ) / 3600 )); MIN=$(( (RUNTIME % 86400 % 3600) / 60 )); SEC=$(( RUNTIME % 86400 % 3600 % 60 ))
[ "$GLOBAL" = '--interface warp' ] && ip_case "$NF" warp non-global || ip_case "$NF" warp
WAN=$(eval echo \$WAN$NF) && COUNTRY=$(eval echo \$COUNTRY$NF) && ASNORG=$(eval echo \$ASNORG$NF)
unset RESULT REGION
for ((l=0; l<${#RESULT_TITLE[@]}; l++)); do
RESULT[l]=$(curl --user-agent "${UA_Browser}" -$NF $GLOBAL -fsL --write-out %{http_code} --output /dev/null --max-time 10 "https://www.netflix.com/title/${RESULT_TITLE[l]}")
[ "${RESULT[l]}" = 200 ] && break
done
if [[ "${RESULT[@]}" =~ 200 ]]; then
REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" -"$NF" $GLOBAL -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
REGION=${REGION:-'US'}
echo "$REGION" | grep -qi "$EXPECT" && info " $(text 125) " && i=0 && sleep 1h || warp_restart
else
warp_restart
fi
done
}
change_client() {
client_restart() {
local CLIENT_MODE=$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')
case "$CLIENT_MODE" in
Warp )
warning " $(text 126) " && warp-cli --accept-tos delete >/dev/null 2>&1
rule_del >/dev/null 2>&1
warp-cli --accept-tos register >/dev/null 2>&1
[ -s /etc/wireguard/license ] && warp-cli --accept-tos set-license $(cat /etc/wireguard/license) >/dev/null 2>&1
sleep $j
rule_add >/dev/null 2>&1
;;
WarpProxy )
warning " $(text 126) " && warp-cli --accept-tos delete >/dev/null 2>&1
warp-cli --accept-tos delete >/dev/null 2>&1
warp-cli --accept-tos register >/dev/null 2>&1
[ -s /etc/wireguard/license ] && warp-cli --accept-tos set-license $(cat /etc/wireguard/license) >/dev/null 2>&1
sleep $j
esac
}
change_stack
if [ "$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')" = 'WarpProxy' ]; then
[ -z "$EXPECT" ] && input_region
i=0; j=10
while true; do
(( i++ )) || true
ip_now=$(date +%s); RUNTIME=$((ip_now - ip_start)); DAY=$(( RUNTIME / 86400 )); HOUR=$(( (RUNTIME % 86400 ) / 3600 )); MIN=$(( (RUNTIME % 86400 % 3600) / 60 )); SEC=$(( RUNTIME %86400 % 3600 % 60 ))
ip_case "$NF" client
WAN=$(eval echo "\$CLIENT_WAN$NF") && ASNORG=$(eval echo "\$CLIENT_ASNORG$NF") && COUNTRY=$(eval echo "\$CLIENT_COUNTRY$NF")
unset RESULT REGION
for ((l=0; l<${#RESULT_TITLE[@]}; l++)); do
RESULT[l]=$(curl --user-agent "${UA_Browser}" -"$NF" -sx socks5://127.0.0.1:$CLIENT_PORT -fsL --write-out %{http_code} --output /dev/null --max-time 10 "https://www.netflix.com/title/${RESULT_TITLE[l]}")
[ "${RESULT[l]}" = 200 ] && break
done
if [[ "${RESULT[@]}" =~ 200 ]]; then
REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" -"$NF" -sx socks5://127.0.0.1:$CLIENT_PORT -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
REGION=${REGION:-'US'}
echo "$REGION" | grep -qi "$EXPECT" && info " $(text 125) " && i=0 && sleep 1h || client_restart
else
client_restart
fi
done
else
[ -z "$EXPECT" ] && input_region
i=0; j=10
while true; do
(( i++ )) || true
ip_now=$(date +%s); RUNTIME=$((ip_now - ip_start)); DAY=$(( RUNTIME / 86400 )); HOUR=$(( (RUNTIME % 86400 ) / 3600 )); MIN=$(( (RUNTIME % 86400 % 3600) / 60 )); SEC=$(( RUNTIME % 86400 % 3600 % 60 ))
ip_case "$NF" luban
WAN=$(eval echo "\$CFWARP_WAN$NF") && COUNTRY=$(eval echo "\$CFWARP_COUNTRY$NF") && ASNORG=$(eval echo "\$CFWARP_ASNORG$NF")
unset RESULT REGION
for ((l=0; l<${#RESULT_TITLE[@]}; l++)); do
RESULT[l]=$(curl --user-agent "${UA_Browser}" $INTERFACE -fsL --write-out %{http_code} --output /dev/null --max-time 10 "https://www.netflix.com/title/${RESULT_TITLE[l]}")
[ "${RESULT[l]}" = 200 ] && break
done
[ "${RESULT[0]}" != 200 ] && RESULT[1]=$(curl --user-agent "${UA_Browser}" $INTERFACE -fsL --write-out %{http_code} --output /dev/null --max-time 10 "https://www.netflix.com/title/${RESULT_TITLE[1]}" 2>&1)
if [[ "${RESULT[@]}" =~ 200 ]]; then
REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" $INTERFACE -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
REGION=${REGION:-'US'}
echo "$REGION" | grep -qi "$EXPECT" && info " $(text 125) " && i=0 && sleep 1h || client_restart
else
client_restart
fi
done
fi
}
change_wireproxy() {
wireproxy_restart() { warning " $(text 126) " && systemctl restart wireproxy; sleep $j; }
change_stack
[ -z "$EXPECT" ] && input_region
i=0; j=3
while true; do
(( i++ )) || true
ip_now=$(date +%s); RUNTIME=$((ip_now - ip_start)); DAY=$(( RUNTIME / 86400 )); HOUR=$(( (RUNTIME % 86400 ) / 3600 )); MIN=$(( (RUNTIME % 86400 % 3600) / 60 )); SEC=$(( RUNTIME % 86400 % 3600 % 60 ))
ip_case "$NF" wireproxy
WAN=$(eval echo "\$WIREPROXY_WAN$NF") && ASNORG=$(eval echo "\$WIREPROXY_ASNORG$NF") && COUNTRY=$(eval echo "\$WIREPROXY_COUNTRY$NF")
unset RESULT REGION
for ((l=0; l<${#RESULT_TITLE[@]}; l++)); do
RESULT[l]=$(curl --user-agent "${UA_Browser}" -"$NF" -sx socks5h://127.0.0.1:$WIREPROXY_PORT -fsL --write-out %{http_code} --output /dev/null --max-time 10 "https://www.netflix.com/title/${RESULT_TITLE[l]}")
[ "${RESULT[l]}" = 200 ] && break
done
if [[ "${RESULT[@]}" =~ 200 ]]; then
REGION=$(tr 'a-z' 'A-Z' <<< "$(curl --user-agent "${UA_Browser}" -"$NF" -sx socks5h://127.0.0.1:$WIREPROXY_PORT -fs --max-time 10 --write-out "%{redirect_url}" --output /dev/null "https://www.netflix.com/title/$REGION_TITLE" | sed 's/.*com\/\([^-/]\{1,\}\).*/\1/g')")
REGION=${REGION:-'US'}
echo "$REGION" | grep -qi "$EXPECT" && info " $(text 125) " && i=0 && sleep 1h || wireproxy_restart
else
wireproxy_restart
fi
done
}
# 设置时区，让时间戳时间准确，显示脚本运行时长，中文为 GMT+8，英文为 UTC; 设置 UA
ip_start=$(date +%s)
[ "$SYSTEM" != Alpine ] && ( [ "$L" = C ] && timedatectl set-timezone Asia/Shanghai || timedatectl set-timezone UTC )
UA_Browser="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.87 Safari/537.36"
# 根据 lmc999 脚本检测 Netflix Title，如获取不到，使用兜底默认值
local LMC999=($(curl -sSLm4 https://${CDN}raw.githubusercontent.com/lmc999/RegionRestrictionCheck/main/check.sh | awk -F 'title/' '/netflix.com\/title/{print $2}' | cut -d\" -f1))
RESULT_TITLE=(${LMC999[*]:0:2})
REGION_TITLE=${LMC999[2]}
[[ ! "${RESULT_TITLE[0]}" =~ ^[0-9]+$ ]] && RESULT_TITLE[0]='81280792'
[[ ! "${RESULT_TITLE[1]}" =~ ^[0-9]+$ ]] && RESULT_TITLE[1]='70143836'
[[ ! "$REGION_TITLE" =~ ^[0-9]+$ ]] && REGION_TITLE='80018499'
# 根据 WARP interface 、 Client 和 Wireproxy 的安装情况判断刷 IP 的方式
INSTALL_CHECK=("wg-quick" "warp-cli" "wireproxy")
CASE_RESAULT=("0 0 0" "0 0 1" "0 1 0" "0 1 1" "1 0 0" "1 0 1" "1 1 0" "1 1 1")
SHOW_CHOOSE=("$(text 150)" "" "" "$(text 151)" "" "$(text 152)" "$(text 153)" "$(text 154)")
CHANGE_IP1=("" "change_wireproxy" "change_client" "change_client" "change_warp" "change_warp" "change_warp" "change_warp")
CHANGE_IP2=("" "" "" "change_wireproxy" "" "change_wireproxy" "change_client" "change_client")
CHANGE_IP3=("" "" "" "" "" "" "" "change_wireproxy")
for ((a=0; a<${#INSTALL_CHECK[@]}; a++)); do
[ $(type -p ${INSTALL_CHECK[a]}) ] && INSTALL_RESULT[a]=1 || INSTALL_RESULT[a]=0
done
for ((b=0; b<${#CASE_RESAULT[@]}; b++)); do
[[ "${INSTALL_RESULT[@]}" = "${CASE_RESAULT[b]}" ]] && break
done
case "$b" in
0 )
error " $(text 150) "
;;
1|2|4 )
${CHANGE_IP1[b]}
;;
* )
hint "\n ${SHOW_CHOOSE[b]} \n" && reading " $(text 50) " MODE
case "$MODE" in
[1-3] )
$(eval echo "\${CHANGE_IP$MODE[b]}")
;;
* )
warning " $(text 51) [1-3] "; sleep 1; change_ip
esac
esac
}
# 安装BBR
bbrInstall() {
echo -e "\n==============================================================\n"
info " $(text 47) "
echo -e "\n==============================================================\n"
hint " 1. $(text 48) "
[ "$OPTION" != b ] && hint " 0. $(text 49) \n" || hint " 0. $(text 76) \n"
reading " $(text 50) " BBR
case "$BBR" in
1 )
wget --no-check-certificate -N "https://${CDN}raw.githubusercontent.com/ylx2016/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh
;;
0 )
[ "$OPTION" != b ] && menu || exit
;;
* )
warning " $(text 51) [0-1]"; sleep 1; bbrInstall
esac
}
# 关闭 WARP 网络接口，并删除 WARP
uninstall() {
unset IP4 IP6 WAN4 WAN6 COUNTRY4 COUNTRY6 ASNORG4 ASNORG6
# 卸载 WARP
uninstall_warp() {
wg-quick down warp >/dev/null 2>&1
systemctl disable --now wg-quick@warp >/dev/null 2>&1; sleep 3
[ $(type -p rpm) ] && rpm -e wireguard-tools 2>/dev/null
systemctl restart systemd-resolved >/dev/null 2>&1; sleep 3
cancel_account /etc/wireguard/warp-account.conf
rm -rf /usr/bin/wireguard-go /usr/bin/warp /etc/dnsmasq.d/warp.conf /usr/bin/wireproxy /etc/local.d/warp.start
[ -e /etc/gai.conf ] && sed -i '/^precedence \:\:ffff\:0\:0/d;/^label 2002\:\:\/16/d' /etc/gai.conf
[ -e /usr/bin/tun.sh ] && rm -f /usr/bin/tun.sh
[ -e /etc/crontab ] && sed -i '/tun.sh/d' /etc/crontab
sed -i "/250 warp/d" /etc/iproute2/rt_tables
[ -e /etc/resolv.conf.origin ] && mv -f /etc/resolv.conf.origin /etc/resolv.conf
}
# 卸载 Linux Client
uninstall_client() {
warp-cli --accept-tos disconnect >/dev/null 2>&1
warp-cli --accept-tos disable-always-on >/dev/null 2>&1
warp-cli --accept-tos delete >/dev/null 2>&1
rule_del >/dev/null 2>&1
${PACKAGE_UNINSTALL[int]} cloudflare-warp 2>/dev/null
systemctl disable --now warp-svc >/dev/null 2>&1
rm -rf /usr/bin/wireguard-go /usr/bin/warp $HOME/.local/share/warp /etc/apt/sources.list.d/cloudflare-client.list /etc/yum.repos.d/cloudflare-warp.repo
}
# 卸载 Wireproxy
uninstall_wireproxy() {
systemctl disable --now wireproxy
cancel_account /etc/wireguard/warp-account.conf
rm -rf /usr/bin/wireguard-go /usr/bin/warp /etc/dnsmasq.d/warp.conf /usr/bin/wireproxy /lib/systemd/system/wireproxy.service
[ -e /etc/gai.conf ] && sed -i '/^precedence \:\:ffff\:0\:0/d;/^label 2002\:\:\/16/d' /etc/gai.conf
[ -e /usr/bin/tun.sh ] && rm -f /usr/bin/tun.sh && sed -i '/tun.sh/d' /etc/crontab
}
# 如已安装 warp_unlock 项目，先行卸载
[ -e /etc/wireguard/warp_unlock.sh ] && bash <(curl -sSL https://${CDN}gitlab.com/fscarmen/warp_unlock/-/raw/main/unlock.sh) -U -$L
# 根据已安装情况执行卸载任务并显示结果
UNINSTALL_CHECK=("wg-quick" "warp-cli" "wireproxy")
UNINSTALL_DO=("uninstall_warp" "uninstall_client" "uninstall_wireproxy")
UNINSTALL_DEPENDENCIES=("wireguard-tools openresolv " "" " openresolv ")
UNINSTALL_NOT_ARCH=("wireguard-dkms " "" "wireguard-dkms resolvconf ")
UNINSTALL_DNSMASQ=("ipset dnsmasq resolvconf ")
UNINSTALL_RESULT=("$(text 117)" "$(text 119)" "$(text 98)")
for ((i=0; i<${#UNINSTALL_CHECK[@]}; i++)); do
[ $(type -p ${UNINSTALL_CHECK[i]}) ] && UNINSTALL_DO_LIST[i]=1 && UNINSTALL_DEPENDENCIES_LIST+=${UNINSTALL_DEPENDENCIES[i]}
[[ $SYSTEM != "Arch" && $(dkms status 2>/dev/null) =~ wireguard ]] && UNINSTALL_DEPENDENCIES_LIST+=${UNINSTALL_NOT_ARCH[i]}
[ -e /etc/dnsmasq.d/warp.conf ] && UNINSTALL_DEPENDENCIES_LIST+=${UNINSTALL_DNSMASQ[i]}
done
# 列出依赖，确认是手动还是自动卸载
UNINSTALL_DEPENDENCIES_LIST=$(echo $UNINSTALL_DEPENDENCIES_LIST | sed "s/ /\n/g" | sort -u | paste -d " " -s)
[ "$UNINSTALL_DEPENDENCIES_LIST" != '' ] && hint "\n $(text 79) \n" && reading " $(text 170) " CONFIRM_UNINSTALL
# 卸载核心程序
for ((i=0; i<${#UNINSTALL_CHECK[@]}; i++)); do
[[ "${UNINSTALL_DO_LIST[i]}" = 1 ]] && ( ${UNINSTALL_DO[i]}; info " ${UNINSTALL_RESULT[i]} " )
done
# 删除本脚本安装在 /etc/wireguard/ 下的所有文件，如果删除后目录为空，一并把目录删除
rm -f /usr/bin/wg-quick.{origin,reserved}
rm -f /etc/wireguard/{wgcf-account.conf,warp-temp.conf,warp-account.conf,warp_unlock.sh,warp.conf.bak,warp.conf,up,proxy.conf.bak,proxy.conf,menu.sh,license,language,info-temp.log,info.log,down,account-temp.conf,NonGlobalUp.sh,NonGlobalDown.sh}
[[ -e /etc/wireguard && -z "$(ls -A /etc/wireguard/)" ]] && rmdir /etc/wireguard
# 选择自动卸载依赖执行以下
[[ "$UNINSTALL_DEPENDENCIES_LIST" != '' && "$CONFIRM_UNINSTALL" = [Yy] ]] && ( ${PACKAGE_UNINSTALL[int]} $UNINSTALL_DEPENDENCIES_LIST 2>/dev/null; info " $(text 171) \n" )
# 显示卸载结果
systemctl restart systemd-resolved >/dev/null 2>&1; sleep 3
ip_case d warp
info " $(text 45)\n IPv4: $WAN4 $COUNTRY4 $ASNORG4\n IPv6: $WAN6 $COUNTRY6 $ASNORG6 "
}
# 同步脚本至最新版本
ver() {
mkdir -p /tmp; rm -f /tmp/menu.sh
wget -O /tmp/menu.sh https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/menu.sh
if [ -s /tmp/menu.sh ]; then
mv /tmp/menu.sh /etc/wireguard/
chmod +x /etc/wireguard/menu.sh
ln -sf /etc/wireguard/menu.sh /usr/bin/warp
info " $(text 64):$(grep ^VERSION /etc/wireguard/menu.sh | sed "s/.*=//g") $(text 18):$(grep "${L}\[1\]" /etc/wireguard/menu.sh | cut -d \" -f2) "
else
error " $(text 65) "
fi
exit
}
# 由于warp bug，有时候获取不了ip地址，加入刷网络脚本手动运行，并在定时任务加设置 VPS 重启后自动运行,i=当前尝试次数，j=要尝试的次数
net() {
local NO_OUTPUT="$1"
unset IP4 IP6 WAN4 WAN6 COUNTRY4 COUNTRY6 ASNORG4 ASNORG6 WARPSTATUS4 WARPSTATUS6 TYPE QUOTA
[[ ! $(type -p wg-quick) || ! -e /etc/wireguard/warp.conf ]] && error " $(text 10) "
local i=1; local j=5
hint " $(text 11)\n $(text 12) "
[ "$SYSTEM" != Alpine ] && [[ $(systemctl is-active wg-quick@warp) != 'active' ]] && wg-quick down warp >/dev/null 2>&1
${SYSTEMCTL_START[int]} >/dev/null 2>&1
wg-quick up warp >/dev/null 2>&1
ss -nltp | grep dnsmasq >/dev/null 2>&1 && systemctl restart dnsmasq >/dev/null 2>&1
PING6='ping -6' && [ $(type -p ping6) ] && PING6='ping6'
LAN4=$(ip route get 192.168.193.10 2>/dev/null | awk '{for (i=0; i<NF; i++) if ($i=="src") {print $(i+1)}}')
LAN6=$(ip route get 2606:4700:d0::a29f:c001 2>/dev/null | awk '{for (i=0; i<NF; i++) if ($i=="src") {print $(i+1)}}')
if [[ $(ip link show | awk -F': ' '{print $2}') =~ warp ]]; then
grep -q '#Table' /etc/wireguard/warp.conf && GLOBAL_OR_NOT="$(text 184)" || GLOBAL_OR_NOT="$(text 185)"
if grep -q '^AllowedIPs.*:\:\/0' 2>/dev/null /etc/wireguard/warp.conf; then
local NET_6_NONGLOBAL=1
ip_case 6 warp non-global
else
[[ "$LAN6" != "::1" && "$LAN6" =~ ^([a-f0-9]{1,4}:){2,4}[a-f0-9]{1,4} ]] && $PING6 -c2 -w10 2606:4700:d0::a29f:c001 >/dev/null 2>&1 && local NET_6_NONGLOBAL=0 && ip_case 6 warp
fi
if grep -q '^AllowedIPs.*0\.\0\/0' 2>/dev/null /etc/wireguard/warp.conf; then
local NET_4_NONGLOBAL=1
ip_case 4 warp non-global
else
[[ "$LAN4" =~ ^([0-9]{1,3}\.){3} ]] && ping -c2 -W3 162.159.193.10 >/dev/null 2>&1 && local NET_4_NONGLOBAL=0 && ip_case 4 warp
fi
else
[[ "$LAN6" != "::1" && "$LAN6" =~ ^([a-f0-9]{1,4}:){2,4}[a-f0-9]{1,4} ]] && INET6=1 && $PING6 -c2 -w10 2606:4700:d0::a29f:c001 >/dev/null 2>&1 && local NET_6_NONGLOBAL=0 && ip_case 6 warp
[[ "$LAN4" =~ ^([0-9]{1,3}\.){3} ]] && INET4=1 && ping -c2 -W3 162.159.193.10 >/dev/null 2>&1 && local NET_4_NONGLOBAL=0 && ip_case 4 warp
fi
until [[ "$TRACE4$TRACE6" =~ on|plus ]]; do
(( i++ )) || true
hint " $(text 12) "
${SYSTEMCTL_RESTART[int]} >/dev/null 2>&1
ss -nltp | grep dnsmasq >/dev/null 2>&1 && systemctl restart dnsmasq >/dev/null 2>&1
case "$NET_6_NONGLOBAL" in
0 )
ip_case 6 warp
;;
1 )
ip_case 6 warp non-global
esac
case "$NET_4_NONGLOBAL" in
0 )
ip_case 4 warp
;;
1 )
ip_case 4 warp non-global
esac
if [ "$i" = "$j" ]; then
if [ -z "$CONFIRM_TEAMS_INFO" ]; then
wg-quick down warp >/dev/null 2>&1
error " $(text 13) "
else
break
fi
fi
done
if [[ "$TRACE4$TRACE6" =~ on|plus ]]; then
TYPE=' Free' && [ -e /etc/wireguard/info.log ] && TYPE=' Teams' && grep -sq 'Device name' /etc/wireguard/info.log && TYPE='+' && check_quota warp
info " $(text 14), $(text 186) "
[ "$NO_OUTPUT" != 'no_output' ] && info " IPv4:$WAN4 $COUNTRY4 $ASNORG4\n IPv6:$WAN6 $COUNTRY6 $ASNORG6 " && [ -n "$QUOTA" ] && info " $(text 25): $(awk '/Device name/{print $NF}' /etc/wireguard/info.log)\n $(text 63): $QUOTA "
fi
}
# WARP 开关，先检查是否已安装，再根据当前状态转向相反状态
onoff() {
[ ! $(type -p wg-quick) ] && error " $(text 155) "
[ -n "$(wg 2>/dev/null)" ] && (wg-quick down warp >/dev/null 2>&1; info " $(text 15) ") || net
}
# Client 开关，先检查是否已安装，再根据当前状态转向相反状态
client_onoff() {
[ ! $(type -p warp-cli) ] && error " $(text 93) "
if [ "$(systemctl is-active warp-svc)" = 'active' ]; then
local CLIENT_MODE=$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')
[ "$CLIENT_MODE" = 'Warp' ] && rule_del >/dev/null 2>&1
systemctl stop warp-svc
info " $(text 91) " && exit 0
else
systemctl start warp-svc; sleep 2
local CLIENT_MODE=$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')
if [ "$CLIENT_MODE" = 'WarpProxy' ]; then
ip_case d client
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
[[ $(ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}') =~ warp-svc ]] && info " $(text 90)\n $(text 27): $CLIENT_SOCKS5\n WARP$CLIENT_AC IPv4: $CLIENT_WAN4 $CLIENT_COUNTRY4 $CLIENT_ASNORG4\n WARP$CLIENT_AC IPv6: $CLIENT_WAN6 $CLIENT_COUNTRY6 $CLIENT_ASNORG6 "
[ -n "$QUOTA" ] && info " $(text 63): $QUOTA "
exit 0
elif [ "$CLIENT_MODE" = 'Warp' ]; then
rule_add >/dev/null 2>&1
ip_case d luban
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
[[ $(ip link show | awk -F': ' '{print $2}') =~ CloudflareWARP ]] && info " $(text 90)\n WARP$CLIENT_AC IPv4: $CFWARP_WAN4 $CFWARP_COUNTRY4 $CFWARP_ASNORG4\n WARP$CLIENT_AC IPv6: $CFWARP_WAN6 $CFWARP_COUNTRY6 $CFWARP_ASNORG6 "
[ -n "$QUOTA" ] && info " $(text 63): $QUOTA "
exit 0
fi
fi
}
# WireProxy 开关，先检查是否已安装，再根据当前状态转向相反状态
wireproxy_onoff() {
local NO_OUTPUT="$1"
unset QUOTA
[ ! $(type -p wireproxy) ] && error " $(text 157) " || PUFFERFFISH=1
if ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}' | grep -q wireproxy; then
systemctl stop wireproxy
[[ ! $(ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}') =~ wireproxy ]] && info " $(text 158) "
else
local i=1; local j=3
hint " $(text 11)\n $(text 12) "
systemctl start wireproxy; sleep 1
ip_case d wireproxy
until [[ "$WIREPROXY_TRACE4$WIREPROXY_TRACE6" =~ on|plus ]]; do
(( i++ )) || true
hint " $(text 12) "
systemctl restart wireproxy; sleep 1
ip_case d wireproxy
if [[ "$i" = "$j" ]]; then
systemctl stop wireproxy
[ -z "$CONFIRM_TEAMS_INFO" ] && error " $(text 13) " || break
fi
done
if [[ "$NO_OUTPUT" != 'no_output' && "$WIREPROXY_TRACE4$WIREPROXY_TRACE6" =~ on|plus ]]; then
[[ $(ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}') =~ wireproxy ]] && info " $(text 99)\n $(text 27): $WIREPROXY_SOCKS5\n WARP$WIREPROXY_ACCOUNT\n IPv4: $WIREPROXY_WAN4 $WIREPROXY_COUNTRY4 $WIREPROXY_ASNORG4\n IPv6: $WIREPROXY_WAN6 $WIREPROXY_COUNTRY6 $WIREPROXY_ASNORG6"
[ -n "$QUOTA" ] && info " $(text 25): $(awk '/Device name/{print $NF}' /etc/wireguard/info.log)\n $(text 63): $QUOTA "
fi
fi
}
# 检查系统 WARP 单双栈情况。为了速度，先检查 warp 配置文件里的情况，再判断 trace
check_stack() {
if [ -e /etc/wireguard/warp.conf ]; then
grep -q "^#.*0\.\0\/0" 2>/dev/null /etc/wireguard/warp.conf && T4=0 || T4=1
grep -q "^#.*\:\:\/0" 2>/dev/null /etc/wireguard/warp.conf && T6=0 || T6=1
else
case "$TRACE4" in
off )
T4='0'
;;
'on'|'plus' )
T4='1'
esac
case "$TRACE6" in
off )
T6='0'
;;
'on'|'plus' )
T6='1'
esac
fi
CASE=("@0" "0@" "0@0" "@1" "0@1" "1@" "1@0" "1@1")
for ((m=0;m<${#CASE[@]};m++)); do [ "$T4"@"$T6" = "${CASE[m]}" ] && break; done
WARP_BEFORE=("" "" "" "WARP IPv6 only" "WARP IPv6" "WARP IPv4 only" "WARP IPv4" "$(text 70)")
WARP_AFTER1=("" "" "" "WARP IPv4" "WARP IPv4" "WARP IPv6" "WARP IPv6" "WARP IPv4")
WARP_AFTER2=("" "" "" "$(text 70)" "$(text 70)" "$(text 70)" "$(text 70)" "WARP IPv6")
TO1=("" "" "" "014" "014" "106" "106" "114")
TO2=("" "" "" "01D" "01D" "10D" "10D" "116")
SHORTCUT1=("" "" "" "(warp 4)" "(warp 4)" "(warp 6)" "(warp 6)" "(warp 4)")
SHORTCUT2=("" "" "" "(warp d)" "(warp d)" "(warp d)" "(warp d)" "(warp 6)")
# 判断用于检测 NAT VSP，以选择正确配置文件
if [ "$m" -le 3 ]; then
NAT=("0@1@" "1@0@1" "1@1@1" "0@1@1")
for ((n=0;n<${#NAT[@]};n++)); do [ "$IPV4@$IPV6@$INET4" = "${NAT[n]}" ] && break; done
NATIVE=("IPv6 only" "IPv4 only" "$(text 69)" "NAT IPv4")
CONF1=("014" "104" "114" "11N4")
CONF2=("016" "106" "116" "11N6")
CONF3=("01D" "10D" "11D" "11ND")
fi
}
# 单双栈在线互换。先看菜单是否有选择，再看传参数值，再没有显示2个可选项
stack_switch() {
# WARP 单双栈切换选项
SWITCH014="/AllowedIPs/s/#//g;s/^.*\:\:\/0/#&/g"
SWITCH01D="/AllowedIPs/s/#//g"
SWITCH106="/AllowedIPs/s/#//g;s/^.*0\.\0\/0/#&/g"
SWITCH10D="/AllowedIPs/s/#//g"
SWITCH114="/AllowedIPs/s/^.*\:\:\/0/#&/g"
SWITCH116="/AllowedIPs/s/^.*0\.\0\/0/#&/g"
[[ "$CLIENT" = [35] && "$SWITCHCHOOSE" = [4D] ]] && error " $(text 109) "
check_stack
if [[ "$MENU_CHOOSE" = [12] ]]; then
TO=$(eval echo "\${TO$MENU_CHOOSE[m]}")
elif [[ "$SWITCHCHOOSE" = [46D] ]]; then
[[ "$T4@$T6@$SWITCHCHOOSE" =~ '1@0@4'|'0@1@6'|'1@1@D' ]] && error "\n $(text 146) \n" || TO="$T4$T6$SWITCHCHOOSE"
fi
[ "${#TO}" != 3 ] && error " $(text 172) " || sed -i "$(eval echo "\$SWITCH$TO")" /etc/wireguard/warp.conf
${SYSTEMCTL_RESTART[int]}; sleep 1
net
}
# 内核 / wireguard-go with reserved 在线互换
kernel_reserved_switch() {
# 先判断是否可以转换
case "$KERNEL_ENABLE@$WIREGUARD_GO_ENABLE" in
0@1 )
KERNEL_OR_WIREGUARD_GO='wireguard-go with reserved' && error "\n $(text 179) \n"
;;
1@0 )
KERNEL_OR_WIREGUARD_GO='wireguard kernel' && error "\n $(text 179) \n"
;;
1@1 )
if grep -q '^#[[:space:]]*add_if' /usr/bin/wg-quick; then
WIREGUARD_BEFORE='wireguard-go with reserved'; WIREGUARD_AFTER='wireguard kernel'; local CP_FILE=origin
else
WIREGUARD_BEFORE='wireguard kernel'; WIREGUARD_AFTER='wireguard-go with reserved'; local CP_FILE=reserved
fi
reading "\n $(text 181) " CONFIRM_WIREGUARD_CHANGE
if [[ "$CONFIRM_WIREGUARD_CHANGE" = [Yy] ]]; then
wg-quick down warp >/dev/null 2>&1
cp -f /usr/bin/wg-quick.$CP_FILE /usr/bin/wg-quick
net
else
exit
fi
esac
}
# 全局 / 非全局 在线互换
working_mode_switch() {
# 先判断当前工作模式
if grep -q '#Table' /etc/wireguard/warp.conf; then
MODE_BEFORE="$(text 184)"; MODE_AFTER="$(text 185)"
else
MODE_BEFORE="$(text 185)"; MODE_AFTER="$(text 184)"
fi
reading "\n $(text 183) " CONFIRM_MODE_CHANGE
if [[ "$CONFIRM_MODE_CHANGE" = [Yy] ]]; then
wg-quick down warp >/dev/null 2>&1
[ "$MODE_AFTER" = "$(text 185)" ] && sed -i "/Table/s/#//g;/NonGlobal/s/#//g" /etc/wireguard/warp.conf || sed -i "s/^Table/#Table/g; /NonGlobal/s/^/#&/g" /etc/wireguard/warp.conf
net
else
exit
fi
}
# 检测系统信息
check_system_info() {
info " $(text 37) "
# 判断是否有加载 wireguard 内核，如没有先尝试是否可以加载，再重新判断一次
if [ ! -e /sys/module/wireguard ]; then
[ -s /lib/modules/$(uname -r)/kernel/drivers/net/wireguard/wireguard.ko ] && [ $(type -p lsmod) ] && ! lsmod | grep -q wireguard && [ $(type -p modprobe) ] && modprobe wireguard
[ -e /sys/module/wireguard ] && KERNEL_ENABLE=1 || KERNEL_ENABLE=0
else
KERNEL_ENABLE=1
fi
# 必须加载 TUN 模块，先尝试在线打开 TUN。尝试成功放到启动项，失败作提示并退出脚本
TUN=$(cat /dev/net/tun 2>&1)
if [[ "$TUN" =~ 'in bad state'|'处于错误状态' ]]; then
WIREGUARD_GO_ENABLE=1
else
cat >/usr/bin/tun.sh << EOF
#!/usr/bin/env bash
mkdir -p /dev/net
mknod /dev/net/tun c 10 200 2>/dev/null
[ ! -e /dev/net/tun ] && exit 1
chmod 0666 /dev/net/tun
EOF
bash /usr/bin/tun.sh
TUN=$(cat /dev/net/tun 2>&1)
if [[ "$TUN" =~ 'in bad state'|'处于错误状态' ]]; then
WIREGUARD_GO_ENABLE=1
chmod +x /usr/bin/tun.sh
[ "$SYSTEM" != Alpine ] && echo "@reboot root bash /usr/bin/tun.sh" >> /etc/crontab
else
WIREGUARD_GO_ENABLE=0
rm -f /usr/bin/tun.sh
fi
fi
# 判断机器原生状态类型
IPV4=0; IPV6=0
LAN4=$(ip route get 192.168.193.10 2>/dev/null | awk '{for (i=0; i<NF; i++) if ($i=="src") {print $(i+1)}}')
LAN6=$(ip route get 2606:4700:d0::a29f:c001 2>/dev/null | awk '{for (i=0; i<NF; i++) if ($i=="src") {print $(i+1)}}')
# 先查是否非局，优先 warp IP，再原生 IP
if [[ $(ip link show | awk -F': ' '{print $2}') =~ warp ]]; then
GLOBAL_OR_NOT="$(text 185)"
if grep -q '^AllowedIPs.*:\:\/0' 2>/dev/null /etc/wireguard/warp.conf; then
STACK=-6 && ip_case 6 warp non-global
else
[[ "$LAN6" != "::1" && "$LAN6" =~ ^([a-f0-9]{1,4}:){2,4}[a-f0-9]{1,4} ]] && INET6=1 && $PING6 -c2 -w10 2606:4700:d0::a29f:c001 >/dev/null 2>&1 && IPV6=1 && STACK=-6 && ip_case 6 warp
fi
if grep -q '^AllowedIPs.*0\.\0\/0' 2>/dev/null /etc/wireguard/warp.conf; then
STACK=-4 && ip_case 4 warp non-global
else
[[ "$LAN4" =~ ^([0-9]{1,3}\.){3} ]] && INET4=1 && ping -c2 -W3 162.159.193.10 >/dev/null 2>&1 && IPV4=1 && STACK=-4 && ip_case 4 warp
fi
else
[[ "$LAN6" != "::1" && "$LAN6" =~ ^([a-f0-9]{1,4}:){2,4}[a-f0-9]{1,4} ]] && INET6=1 && $PING6 -c2 -w10 2606:4700:d0::a29f:c001 >/dev/null 2>&1 && IPV6=1 && STACK=-6 && ip_case 6 warp
[[ "$LAN4" =~ ^([0-9]{1,3}\.){3} ]] && INET4=1 && ping -c2 -W3 162.159.193.10 >/dev/null 2>&1 && IPV4=1 && STACK=-4 && ip_case 4 warp
fi
# 判断当前 WARP 状态，决定变量 PLAN，变量 PLAN 含义:1=单栈 2=双栈 3=WARP已开启
[[ "$TRACE4$TRACE6" =~ on|plus ]] && PLAN=3 || PLAN=$((IPV4+IPV6))
# 判断处理器架构
case $(uname -m) in
aarch64 )
ARCHITECTURE=arm64; AMD64_ONLY="$(text 156)"
;;
x86_64 )
ARCHITECTURE=amd64
;;
s390x )
ARCHITECTURE=s390x; AMD64_ONLY="$(text 156)"
;;
* )
error " $(text 134) "
esac
# 判断当前 Linux Client 状态，决定变量 CLIENT，变量 CLIENT 含义:0=未安装 1=已安装未激活 2=状态激活 3=Client proxy 已开启 5=Client warp 已开启
CLIENT=0
if [ $(type -p warp-cli) ]; then
CLIENT=1 && CLIENT_INSTALLED="$(text 92)"
[ "$(systemctl is-enabled warp-svc)" = enabled ] && CLIENT=2
if [[ "$CLIENT" = 2 && "$(systemctl is-active warp-svc)" = 'active' ]]; then
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
local CLIENT_MODE=$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')
case "$CLIENT_MODE" in
WarpProxy )
[[ "$(ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}')" =~ warp-svc ]] && CLIENT=3 && ip_case d client
;;
Warp )
[[ "$(ip link show | awk -F': ' '{print $2}')" =~ CloudflareWARP ]] && CLIENT=5 && ip_case d luban
esac
fi
fi
# 判断当前 WireProxy 状态，决定变量 WIREPROXY，变量 WIREPROXY 含义:0=未安装，1=已安装,断开状态，2=Client 已开启
WIREPROXY=0
if [ $(type -p wireproxy) ]; then
WIREPROXY=1
[ "$WIREPROXY" = 1 ] && WIREPROXY_INSTALLED="$(text 92)" && [[ "$(ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}')" =~ wireproxy ]] && WIREPROXY=2 && ip_case d wireproxy
fi
}
rule_add() {
ip -4 rule add from 172.16.0.2 lookup 51820
ip -4 route add default dev CloudflareWARP table 51820
ip -4 rule add table main suppress_prefixlength 0
ip -6 rule add oif CloudflareWARP lookup 51820
ip -6 route add default dev CloudflareWARP table 51820
ip -6 rule add table main suppress_prefixlength 0
}
rule_del() {
ip -4 rule delete from 172.16.0.2 lookup 51820
ip -4 rule delete table main suppress_prefixlength 0
ip -6 rule delete oif CloudflareWARP lookup 51820
ip -6 rule delete table main suppress_prefixlength 0
}
# 输入 WARP+ 账户（如有），限制位数为空或者26位以防输入错误
input_license() {
[ -z "$LICENSE" ] && reading " $(text 28) " LICENSE
i=5
until [[ -z "$LICENSE" || "$LICENSE" =~ ^[A-Z0-9a-z]{8}-[A-Z0-9a-z]{8}-[A-Z0-9a-z]{8}$ ]]; do
(( i-- )) || true
[ "$i" = 0 ] && error " $(text 29) " || reading " $(text 30) " LICENSE
done
if [ "$INPUT_LICENSE" = 1 ]; then
[[ -n "$LICENSE" && -z "$NAME" ]] && reading " $(text 102) " NAME
[ -n "$NAME" ] && NAME="${NAME//[[:space:]]/_}" || NAME=${NAME:-"$(hostname)"}
fi
}
# 输入 Teams 账户 URL（如有）
input_url_token() {
if [ "$1" = 'url' ]; then
[ -z "$TEAM_URL" ] && reading " url: " TEAM_URL
[ -n "$TEAM_URL" ] && TEAMS_CONTENT=$(curl --retry 2 -m5 -sSL "$TEAM_URL") || return
if grep -q 'xml version' <<< "$TEAMS_CONTENT"; then
ADDRESS6=$(expr "$TEAMS_CONTENT" : '.*v6&quot;:&quot;\([^[&]*\).*')
[ -n "$ADDRESS6" ] && PRIVATEKEY=$(expr "$TEAMS_CONTENT" : '.*private_key&quot;>\([^<]*\).*')
[[ -n "$ADDRESS6" && -z "$PRIVATEKEY" ]] && PRIVATEKEY=$(expr "$TEAMS_CONTENT" : '.*private_key">\([^<]\+\).*')
RESERVED=$(expr "$TEAMS_CONTENT" : '.*;client_id&quot;:&quot;\([^&]\{4\}\)')
CLIENT_ID=$(reserved_and_clientid "$RESERVED" decode)
else
ADDRESS6=$(expr "$TEAMS_CONTENT" : '.*"v6":[ ]*"\([^["]\+\).*')
PRIVATEKEY=$(expr "$TEAMS_CONTENT" : '.*"private_key":[ ]*"\([^"]\+\).*')
RESERVED=$(expr "$TEAMS_CONTENT" : '.*"client_id":[ ]*"\([^"]\+\).*')
CLIENT_ID=$(reserved_and_clientid "$RESERVED" decode)
fi
elif [ "$1" = 'token' ]; then
[ -z "$TEAM_TOKEN" ] && reading " token: " TEAM_TOKEN
[ -z "$TEAM_TOKEN" ] && return
local ERROR_TIMES=0
while [ "$ERROR_TIMES" -le 3 ]; do
(( ERROR_TIMES++ ))
if grep -q 'token is expired' <<< "$TEAMS"; then
reading " $(text 128) " TEAM_TOKEN
elif grep -q 'error' <<< "$TEAMS"; then
reading " $(text 162) " TEAM_TOKEN
elif grep -q 'organization' <<< "$TEAMS"; then
break
fi
[ -z "$TEAM_TOKEN" ] && return
unset TEAMS ADDRESS6 PRIVATEKEY CLIENT_ID
TEAMS=$(bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh | sed 's# > $registe_path##; /cat $registe_path/d') --registe --token $TEAM_TOKEN)
ADDRESS6=$(expr "$TEAMS" : '.*"v6":[ ]*"\([^"]*\).*')
PRIVATEKEY=$(expr "$TEAMS" : '.*"private_key":[ ]*"\([^"]*\).*')
RESERVED=$(expr "$TEAMS" : '.*"client_id":[ ]*"\([^"]*\).*')
CLIENT_ID=$(reserved_and_clientid "$RESERVED" decode)
done
elif [ "$1" = 'input' ]; then
reading " private key: " PRIVATEKEY
[ -n "$PRIVATEKEY" ] && reading " IPv6: " ADDRESS6 || return
ADDRESS6=${ADDRESS6//\/128/}
[[ -n "$PRIVATEKEY" && -n "$ADDRESS6" ]] && reading " Reserved or client_id: " RESERVED_OR_CLIENT_ID || return
if [[ "$RESERVED_OR_CLIENT_ID" =~ ^[a-zA-Z+/]{4}$ ]]; then
RESERVED=$RESERVED_OR_CLIENT_ID
CLIENT_ID=$(reserved_and_clientid "$RESERVED" decode)
elif [[ "$RESERVED_OR_CLIENT_ID" =~ ([0-9]{1,3}){3} ]]; then
RESERVED=$(reserved_and_clientid "$RESERVED_OR_CLIENT_ID" encode)
CLIENT_ID=$(reserved_and_clientid "$RESERVED" decode)
fi
elif [ "$1" = 'share' ]; then
PRIVATEKEY=MKTg1UXzTGCB7IrRzfATwjC4MGFFE2WHibpHrBUzDUs=
ADDRESS6=2606:4700:110:8147:4c61:5525:9014:dd3
CLIENT_ID='[153, 228, 25]'
fi
[[ "$PRIVATEKEY" =~ ^[A-Z0-9a-z/+]{43}=$ ]] && MATCH[0]=$(text 135) || MATCH[0]=$(text 136)
[[ "$ADDRESS6" =~ ^[0-9a-f]{4}(:[0-9a-f]{0,4}){7}$ ]] && MATCH[1]=$(text 135) || MATCH[1]=$(text 136)
[[ "$CLIENT_ID" =~ ^\[[0-9]{1,3}(,[[:space:]]*[0-9]{1,3}){2}\]$ ]] && MATCH[2]=$(text 135) || MATCH[2]=$(text 136)
[ "$1" != 'token' ] && TEAMS="{\"private_key\": \"$PRIVATEKEY\", \"v6\": \"$ADDRESS6\", \"client_id\": \"$CLIENT_ID\"}"
hint "\n $(text 130) \n" && reading " $(text 131) " CONFIRM_TEAMS_INFO
}
# 升级 WARP+ 账户（如有），限制位数为空或者26位以防输入错误，WARP interface 可以自定义设备名(不允许字符串间有空格，如遇到将会以_代替)
update_license() {
[ -z "$LICENSE" ] && reading " $(text 61) " LICENSE
i=5
until [[ "$LICENSE" =~ ^[A-Z0-9a-z]{8}-[A-Z0-9a-z]{8}-[A-Z0-9a-z]{8}$ ]]; do
(( i-- )) || true
[ "$i" = 0 ] && error " $(text 29) " || reading " $(text 100) " LICENSE
done
[[ -z "$CLIENT_ACCOUNT" && "$CHOOSE_TYPE" = 2 && -n "$LICENSE" && -z "$NAME" ]] && reading " $(text 102) " NAME
[ -n "$NAME" ] && NAME="${NAME//[[:space:]]/_}" || NAME=${NAME:-"$(hostname)"}
}
# 输入 Linux Client 端口,先检查默认的40000是否被占用,限制4-5位数字,准确匹配空闲端口
input_port() {
i=5
PORT=40000
ss -nltp | awk '{print $4}' | awk -F: '{print $NF}' | grep -qw $PORT && reading " $(text 103) " PORT || reading " $(text 104) " PORT
PORT=${PORT:-'40000'}
until grep -qE "^[1-9][0-9]{3,4}$" <<< $PORT && [[ "$PORT" -ge 1000 && "$PORT" -le 65535 ]] && [[ ! $(ss -nltp) =~ :"$PORT"[[:space:]] ]]; do
(( i-- )) || true
[ "$i" = 0 ] && error " $(text 29) "
if grep -qwE "^[1-9][0-9]{3,4}$" <<< $PORT; then
if [[ "$PORT" -ge 1000 && "$PORT" -le 65535 ]]; then
ss -nltp | awk '{print $4}' | awk -F: '{print $NF}' | grep -qw $PORT && reading " $(text 103) " PORT
else
reading " $(text 111) " PORT
PORT=${PORT:-'40000'}
fi
else
reading " $(text 111) " PORT
PORT=${PORT:-'40000'}
fi
done
}
# Linux Client 或 WireProxy 端口
change_port() {
socks5_port() { input_port; warp-cli --accept-tos set-proxy-port "$PORT"; }
wireproxy_port() {
input_port
sed -i "s/BindAddress.*/BindAddress = 127.0.0.1:$PORT/g" /etc/wireguard/proxy.conf
systemctl restart wireproxy
}
INSTALL_CHECK=("$CLIENT" "$WIREPROXY")
CASE_RESAULT=("0 1" "1 0" "1 1")
SHOW_CHOOSE=("" "" "$(text 151)")
CHANGE_PORT1=("wireproxy_port" "socks5_port" "socks5_port")
CHANGE_PORT2=("" "" "wireproxy_port")
for ((e=0;e<${#INSTALL_CHECK[@]}; e++)); do
[[ "${INSTALL_CHECK[e]}" -gt 1 ]] && INSTALL_RESULT[e]=1 || INSTALL_RESULT[e]=0
done
for ((f=0; f<${#CASE_RESAULT[@]}; f++)); do
[[ "${INSTALL_RESULT[@]}" = "${CASE_RESAULT[f]}" ]] && break
done
case "$f" in
0|1 )
${CHANGE_PORT1[f]}
sleep 1
ss -nltp | grep -q ":$PORT" && info " $(text 122) " || error " $(text 34) "
;;
2 )
hint " ${SHOW_CHOOSE[f]} " && reading " $(text 50) " MODE
case "$MODE" in
[1-2] )
$(eval echo "\${CHANGE_IP$MODE[f]}")
sleep 1
ss -nltp | grep -q ":$PORT" && info " $(text 122) " || error " $(text 34) "
;;
* )
warning " $(text 51) [1-2] "; sleep 1; change_port
esac
esac
}
# 选用 iptables+dnsmasq+ipset 方案执行
iptables_solution() {
${PACKAGE_INSTALL[int]} ipset dnsmasq resolvconf mtr
# 创建 dnsmasq 规则文件
cat >/etc/dnsmasq.d/warp.conf << EOF
#!/usr/bin/env bash
server=8.8.8.8
server=1.1.1.1
# ----- WARP ----- #
# > Youtube Premium
server=/googlevideo.com/8.8.8.8
server=/youtube.com/8.8.8.8
server=/youtubei.googleapis.com/8.8.8.8
server=/fonts.googleapis.com/8.8.8.8
server=/yt3.ggpht.com/8.8.8.8
server=/gstatic.com/8.8.8.8
# > Custom ChatGPT
ipset=/openai.com/warp
ipset=/ai.com/warp
# > IP api
ipset=/ip.sb/warp
ipset=/ip.gs/warp
ipset=/ifconfig.co/warp
ipset=/ip-api.com/warp
# > Custom Website
ipset=/www.cloudflare.com/warp
ipset=/googlevideo.com/warp
ipset=/youtube.com/warp
ipset=/youtubei.googleapis.com/warp
ipset=/fonts.googleapis.com/warp
ipset=/yt3.ggpht.com/warp
# > Netflix
ipset=/fast.com/warp
ipset=/netflix.com/warp
ipset=/netflix.net/warp
ipset=/nflxext.com/warp
ipset=/nflximg.com/warp
ipset=/nflximg.net/warp
ipset=/nflxso.net/warp
ipset=/nflxvideo.net/warp
ipset=/239.255.255.250/warp
# > TVBAnywhere+
ipset=/uapisfm.tvbanywhere.com.sg/warp
# > Disney+
ipset=/bamgrid.com/warp
ipset=/disney-plus.net/warp
ipset=/disneyplus.com/warp
ipset=/dssott.com/warp
ipset=/disneynow.com/warp
ipset=/disneystreaming.com/warp
ipset=/cdn.registerdisney.go.com/warp
# > TikTok
ipset=/byteoversea.com/warp
ipset=/ibytedtos.com/warp
ipset=/ipstatp.com/warp
ipset=/muscdn.com/warp
ipset=/musical.ly/warp
ipset=/tiktok.com/warp
ipset=/tik-tokapi.com/warp
ipset=/tiktokcdn.com/warp
ipset=/tiktokv.com/warp
EOF
# 创建 PostUp 和 PreDown
cat >/etc/wireguard/up << EOF
#!/usr/bin/env bash
ipset create warp hash:ip
iptables -t mangle -N fwmark
iptables -t mangle -A PREROUTING -j fwmark
iptables -t mangle -A OUTPUT -j fwmark
iptables -t mangle -A fwmark -m set --match-set warp dst -j MARK --set-mark 2
ip rule add fwmark 2 table warp
ip route add default dev warp table warp
iptables -t nat -A POSTROUTING -m mark --mark 0x2 -j MASQUERADE
iptables -t mangle -A POSTROUTING -o warp -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
EOF
cat >/etc/wireguard/down << EOF
#!/usr/bin/env bash
iptables -t mangle -D PREROUTING -j fwmark
iptables -t mangle -D OUTPUT -j fwmark
iptables -t mangle -D fwmark -m set --match-set warp dst -j MARK --set-mark 2
ip rule del fwmark 2 table warp
iptables -t mangle -D POSTROUTING -o warp -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
iptables -t nat -D POSTROUTING -m mark --mark 0x2 -j MASQUERADE
iptables -t mangle -F fwmark
iptables -t mangle -X fwmark
sleep 2
ipset destroy warp
EOF
chmod +x /etc/wireguard/up /etc/wireguard/down
# 修改 warp.conf 和 warp.conf 文件
sed -i "s/^Post.*/#&/g; /Table/s/#//g; /Table/a\PostUp = /etc/wireguard/up\nPredown = /etc/wireguard/down" /etc/wireguard/warp.conf
[ "$m" = 0 ] && sed -i "2i server=2606:4700:4700::1111\nserver=2001:4860:4860::8888\nserver=2001:4860:4860::8844" /etc/dnsmasq.d/warp.conf
! grep -q 'warp' /etc/iproute2/rt_tables && echo '250 warp' >>/etc/iproute2/rt_tables
systemctl disable systemd-resolved --now >/dev/null 2>&1 && sleep 2
systemctl enable dnsmasq --now >/dev/null 2>&1 && sleep 2
}
# 寻找最佳 MTU
best_mtu() {
# 反复测试最佳 MTU。 Wireguard Header:IPv4=60 bytes,IPv6=80 bytes，1280 ≤ MTU ≤ 1420。 ping = 8(ICMP回显示请求和回显应答报文格式长度) + 20(IP首部) 。
# 详细说明:<[WireGuard] Header / MTU sizes for Wireguard>:https://lists.zx2c4.com/pipermail/wireguard/2017-December/002201.html
MTU=$((1500-28))
[ "$IPV4$IPV6" = 01 ] && $PING6 -c1 -W1 -s $MTU -Mdo 2606:4700:d0::a29f:c001 >/dev/null 2>&1 || ping -c1 -W1 -s $MTU -Mdo 162.159.193.10 >/dev/null 2>&1
until [[ $? = 0 || $MTU -le $((1280+80-28)) ]]; do
MTU=$((MTU-10))
[ "$IPV4$IPV6" = 01 ] && $PING6 -c1 -W1 -s $MTU -Mdo 2606:4700:d0::a29f:c001 >/dev/null 2>&1 || ping -c1 -W1 -s $MTU -Mdo 162.159.193.10 >/dev/null 2>&1
done
if [ "$MTU" -eq $((1500-28)) ]; then
MTU=$MTU
elif [ "$MTU" -le $((1280+80-28)) ]; then
MTU=$((1280+80-28))
else
for ((i=0; i<9; i++)); do
(( MTU++ ))
( [ "$IPV4$IPV6" = 01 ] && $PING6 -c1 -W1 -s $MTU -Mdo 2606:4700:d0::a29f:c001 >/dev/null 2>&1 || ping -c1 -W1 -s $MTU -Mdo 162.159.193.10 >/dev/null 2>&1 ) || break
done
(( MTU-- ))
fi
MTU=$((MTU+28-80))
}
# 寻找最佳 Endpoint，根据 v4 / v6 情况下载 endpoint 库
best_endpoint() {
wget $STACK -qO /tmp/endpoint https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/endpoint/warp-linux-"$ARCHITECTURE" && chmod +x /tmp/endpoint
[ "$IPV4$IPV6" = 01 ] && wget $STACK -qO /tmp/ip https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/endpoint/ipv6 || wget $STACK -qO /tmp/ip https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/endpoint/ipv4
if [[ -e /tmp/endpoint && -e /tmp/ip ]]; then
/tmp/endpoint -file /tmp/ip -output /tmp/endpoint_result >/dev/null 2>&1
# 如果全部是数据包丢失，LOSS = 100%，说明 UDP 被禁止，生成标志 /tmp/noudp
[ $(grep -sE '[0-9]+[ ]+ms$' /tmp/endpoint_result | awk -F, 'NR==1 {print $2}') = '100.00%' ] && touch /tmp/noudp || ENDPOINT=$(grep -sE '[0-9]+[ ]+ms$' /tmp/endpoint_result | awk -F, 'NR==1 {print $1}')
rm -f /tmp/{endpoint,ip,endpoint_result}
fi
# 如果失败，会有默认值 162.159.193.10:2408 或 [2606:4700:d0::a29f:c001]:2408
[ "$IPV4$IPV6" = 01 ] && ENDPOINT=${ENDPOINT:-'[2606:4700:d0::a29f:c001]:2408'} || ENDPOINT=${ENDPOINT:-'162.159.193.10:2408'}
}
# Reserved 与 Client id 互换
reserved_and_clientid() {
if [ "$2" = decode ]; then
echo "$1" | base64 -d | xxd -p | fold -w2 | while read HEX; do printf '%d ' "0x${HEX}"; done | awk '{print "["$1", "$2", "$3"]"}'
elif [ "$2" = encode ]; then
BYTE[0]=$(grep -oE '[0-9]+' <<< "$1" | head -n 1)
BYTE[1]=$(grep -oE '[0-9]+' <<< "$1" | sed -n '2p')
BYTE[2]=$(grep -oE '[0-9]+' <<< "$1" | tail -n 1)
echo "$RESERVED" | printf '%02x' ${BYTE[0]} ${BYTE[1]} ${BYTE[2]} | xxd -r -p | base64
elif [ "$2" = file ]; then
local FILE_PATH=$1
grep 'client_id' $FILE_PATH | cut -d\" -f4 | base64 -d | xxd -p | fold -w2 | while read HEX; do printf '%d ' "0x${HEX}"; done | awk '{print "["$1", "$2", "$3"]"}'
fi
}
# WARP 或 WireProxy 安装
install() {
# 根据之前判断的情况，让用户选择使用 wireguard 内核还是 wireguard-go serverd; 若为 wireproxy 方案则跳过此步
if [ "$PUFFERFFISH" != 1 ]; then
case "$KERNEL_ENABLE@$WIREGUARD_GO_ENABLE" in
0@0 )
error " $(text 3) "
;;
0@1 )
KERNEL_OR_WIREGUARD_GO='wireguard-go with reserved' && info "\n $(text 179) "
;;
1@0 )
KERNEL_OR_WIREGUARD_GO='wireguard kernel' && info "\n $(text 179) "
;;
1@1 )
hint "\n $(text 180) \n" && reading " $(text 50) " KERNEL_OR_WIREGUARD_GO_CHOOSE
KERNEL_OR_WIREGUARD_GO='wireguard kernel' && [ "$KERNEL_OR_WIREGUARD_GO_CHOOSE" = 2 ] && KERNEL_OR_WIREGUARD_GO='wireguard-go with reserved'
esac
fi
# Warp 工作模式: 全局或非全局，在 dnsmasq / wireproxy 方案下不选择
if [[ ! $ANEMONE$PUFFERFFISH =~ '1' ]]; then
[ -z "$GLOBAL_OR_NOT_CHOOSE" ] && hint "\n $(text 182) \n" && reading " $(text 50) " GLOBAL_OR_NOT_CHOOSE
GLOBAL_OR_NOT="$(text 184)" && [ "$GLOBAL_OR_NOT_CHOOSE" = 2 ] && GLOBAL_OR_NOT="$(text 185)"
fi
# WireProxy 禁止重复安装，自定义 Port
if [ "$PUFFERFFISH" = 1 ]; then
ss -nltp | grep -q wireproxy && error " $(text 166) " || input_port
# iptables 禁止重复安装，不适用于 IPv6 only VPS
elif [ "$ANEMONE" = 1 ]; then
[ -e /etc/dnsmasq.d/warp.conf ] && error " $(text 167) "
[ "$m" = 0 ] && error " $(text 147) " || CONF=${CONF1[n]}
fi
# CONF 参数如果不是3位或4位， 即检测不出正确的配置参数， 脚本退出
[[ "$PUFFERFFISH" != 1 && "${#CONF}" != [34] ]] && error " $(text 172) "
# 先删除之前安装，可能导致失败的文件
rm -rf /usr/bin/wireguard-go /etc/wireguard/warp-account.conf
# 询问是否有 WARP+ 或 Teams 账户
[ -z "$CHOOSE_TYPE" ] && hint "\n $(text 132) \n" && reading " $(text 50) " CHOOSE_TYPE
case "$CHOOSE_TYPE" in
2 )
INPUT_LICENSE=1 && input_license
;;
3 )
[ -z "$CHOOSE_TEAMS" ] && hint "\n $(text 127) \n" && reading " $(text 50) " CHOOSE_TEAMS
case "$CHOOSE_TEAMS" in
1 )
input_url_token url
;;
2 )
:
;;
3 )
input_url_token input
;;
* )
input_url_token share
esac
esac
# 选择优先使用 IPv4 /IPv6 网络
[ "$PUFFERFFISH" != 1 ] && hint "\n $(text 105) \n" && reading " $(text 50) " PRIORITY
# 脚本开始时间
start=$(date +%s)
# 如果是 IPv6 only 机器，备份原 dns 文件，再使用 nat64
[ "$m" = 0 ] && cp -f /etc/resolv.conf{,.origin} && echo -e "nameserver 2a00:1098:2b::1\nnameserver 2a01:4f9:c010:3f02::1\nnameserver 2a01:4f8:c2c:123f::1\nnameserver 2a00:1098:2c::1" > /etc/resolv.conf
# 注册 WARP 账户 (将生成 warp-account.conf 文件保存账户信息)
{
# 如安装 WireProxy ，尽量下载官方的最新版本，如官方 WireProxy 下载不成功，将使用 cdn，以更好的支持双栈和大陆 VPS。并添加执行权限
if [ "$PUFFERFFISH" = 1 ]; then
wireproxy_latest=$(wget --no-check-certificate -qO- -T1 -t1 $STACK "https://api.github.com/repos/pufferffish/wireproxy/releases/latest" | awk -F [v\"] '/tag_name/{print $5; exit}')
wireproxy_latest=${wireproxy_latest:-'1.0.7'}
wget --no-check-certificate -T10 -t1 $STACK -O wireproxy.tar.gz https://${CDN}github.com/pufferffish/wireproxy/releases/download/v"$wireproxy_latest"/wireproxy_linux_"$ARCHITECTURE".tar.gz ||
wget --no-check-certificate $STACK -O wireproxy.tar.gz https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/wireproxy/wireproxy_linux_"$ARCHITECTURE".tar.gz
[ $(type -p tar) ] || ${PACKAGE_INSTALL[int]} tar 2>/dev/null || ( ${PACKAGE_UPDATE[int]}; ${PACKAGE_INSTALL[int]} tar 2>/dev/null )
tar xzf wireproxy.tar.gz -C /usr/bin/; rm -f wireproxy.tar.gz
fi
# 注册 WARP 账户 ( warp-account.conf 使用默认值加快速度)。如有 WARP+ 账户，修改 license 并升级，并把设备名等信息保存到 /etc/wireguard/info.log
mkdir -p /etc/wireguard/ >/dev/null 2>&1
bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh | sed 's#cat $registe_path; ##') --registe --file /etc/wireguard/warp-account.conf 2>/dev/null
# 有 License 来升级账户
if [ -n "$LICENSE" ]; then
local UPDATE_RESULT=$(bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --license $LICENSE)
if grep -q '"warp_plus": true' <<< "$UPDATE_RESULT"; then
[ -n "$NAME" ] && bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --name $NAME >/dev/null 2>&1
sed -i "s#\([ ]\+\"license\": \"\).*#\1$LICENSE\"#g; s#\"account_type\".*#\"account_type\": \"limited\",#g; s#\([ ]\+\"name\": \"\).*#\1$NAME\"#g" /etc/wireguard/warp-account.conf
echo "$LICENSE" > /etc/wireguard/license
echo -e "Device name : $NAME" > /etc/wireguard/info.log
elif grep -q 'Invalid license' <<< "$UPDATE_RESULT"; then
warning "\n $(text 169) \n"
elif grep -q 'Too many connected devices.' <<< "$UPDATE_RESULT"; then
warning "\n $(text 36) \n"
else
warning "\n $(text 42) \n"
fi
fi
# 生成 WireGuard 配置文件 (warp.conf)
if [ -s /etc/wireguard/warp-account.conf ]; then
cat > /etc/wireguard/warp.conf <<EOF
[Interface]
PrivateKey = $(grep 'private_key' /etc/wireguard/warp-account.conf | cut -d\" -f4)
Address = 172.16.0.2/32
Address = $(grep '"v6.*"$' /etc/wireguard/warp-account.conf | cut -d\" -f4)/128
DNS = 8.8.8.8
MTU = 1280
#Reserved = $(reserved_and_clientid /etc/wireguard/warp-account.conf file)
#Table = off
#PostUp = /etc/wireguard/NonGlobalUp.sh
#PostDown = /etc/wireguard/NonGlobalDown.sh
[Peer]
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
AllowedIPs = 0.0.0.0/0
AllowedIPs = ::/0
Endpoint = engage.cloudflareclient.com:2408
EOF
cat > /etc/wireguard/NonGlobalUp.sh <<EOF
sleep 5
ip -4 rule add from 172.16.0.2 lookup 51820
ip -4 rule add table main suppress_prefixlength 0
ip -4 route add default dev warp table 51820
ip -6 rule add oif warp lookup 51820
ip -6 rule add table main suppress_prefixlength 0
ip -6 route add default dev warp table 51820
EOF
cat > /etc/wireguard/NonGlobalDown.sh <<EOF
ip -4 rule delete oif warp lookup 51820
ip -4 rule delete table main suppress_prefixlength 0
ip -6 rule delete oif warp lookup 51820
ip -6 rule delete table main suppress_prefixlength 0
EOF
chmod +x /etc/wireguard/NonGlobal*.sh
info "\n $(text 33) \n"
fi
# 最佳 MTU
best_mtu
# 优选 WARP Endpoint
best_endpoint
# 修改配置文件
[ "$GLOBAL_OR_NOT" = "$(text 185)" ] && sed -i "/Table/s/#//g;/NonGlobal/s/#//g" /etc/wireguard/warp.conf
[ -e /etc/wireguard/warp.conf ] && sed -i "s/MTU.*/MTU = $MTU/g; s/engage.*/$ENDPOINT/g" /etc/wireguard/warp.conf && info "\n $(text 81) \n"
}&
# 对于 IPv4 only VPS 开启 IPv6 支持
# 感谢 P3terx 大神项目这块的技术指导。项目:https://github.com/P3TERX/warp.sh/blob/main/warp.sh
{
[ "$IPV4$IPV6" = 10 ] && [[ $(sysctl -a 2>/dev/null | grep 'disable_ipv6.*=.*1') || $(grep -s "disable_ipv6.*=.*1" /etc/sysctl.{conf,d/*} ) ]] &&
(sed -i '/disable_ipv6/d' /etc/sysctl.{conf,d/*}
echo 'net.ipv6.conf.all.disable_ipv6 = 0' >/etc/sysctl.d/ipv6.conf
sysctl -w net.ipv6.conf.all.disable_ipv6=0)
}&
# 优先使用 IPv4 /IPv6 网络
{ stack_priority; }&
# 根据系统选择需要安装的依赖
info "\n $(text 32) \n"
case "$SYSTEM" in
Debian )
# 添加 backports 源,之后才能安装 wireguard-tools
if [ "$(echo $SYS | sed "s/[^0-9.]//g" | cut -d. -f1)" = 9 ]; then
echo "deb http://deb.debian.org/debian/ unstable main" > /etc/apt/sources.list.d/unstable-wireguard.list
echo -e "Package: *\nPin: release a=unstable\nPin-Priority: 150\n" > /etc/apt/preferences.d/limit-unstable
else
echo "deb http://deb.debian.org/debian $(cat /etc/os-release | grep -i VERSION_CODENAME | sed s/.*=//g)-backports main" > /etc/apt/sources.list.d/backports.list
fi
# 更新源
${PACKAGE_UPDATE[int]}
# 安装一些必要的网络工具包和wireguard-tools (Wire-Guard 配置工具:wg、wg-quick)
${PACKAGE_INSTALL[int]} --no-install-recommends net-tools openresolv dnsutils iptables
[ "$PUFFERFFISH" != 1 ] && ${PACKAGE_INSTALL[int]} --no-install-recommends wireguard-tools
;;
Ubuntu )
# 更新源
${PACKAGE_UPDATE[int]}
# 安装一些必要的网络工具包和 wireguard-tools (Wire-Guard 配置工具:wg、wg-quick)
${PACKAGE_INSTALL[int]} --no-install-recommends net-tools openresolv dnsutils iptables
[ "$PUFFERFFISH" != 1 ] && ${PACKAGE_INSTALL[int]} --no-install-recommends wireguard-tools
;;
CentOS|Fedora )
# 安装一些必要的网络工具包和wireguard-tools (Wire-Guard 配置工具:wg、wg-quick)
[ "$COMPANY" = amazon ] && ${PACKAGE_UPDATE[int]} && amazon-linux-extras install -y epel
[ "$SYSTEM" = 'CentOS' ] && ${PACKAGE_INSTALL[int]} epel-release
${PACKAGE_INSTALL[int]} net-tools iptables
[ "$PUFFERFFISH" != 1 ] && ${PACKAGE_INSTALL[int]} wireguard-tools
# 升级所有包同时也升级软件和系统内核
${PACKAGE_UPDATE[int]}
# s390x wireguard-tools 安装
[ "$ARCHITECTURE" = s390x ] && [ ! $(type -p wg) ] && rpm -i https://mirrors.cloud.tencent.com/epel/8/Everything/s390x/Packages/w/wireguard-tools-1.0.20210914-1.el8.s390x.rpm
# CentOS Stream 9 需要安装 resolvconf
[[ "$SYSTEM" = CentOS && "$(expr "$SYS" : '.*\s\([0-9]\{1,\}\)\.*')" = 9 ]] && [ ! $(type -p resolvconf) ] &&
wget $STACK -P /usr/sbin https://${CDN}github.com/fscarmen/warp/releases/download/resolvconf/resolvconf && chmod +x /usr/sbin/resolvconf
;;
Alpine )
# 安装一些必要的网络工具包和wireguard-tools (Wire-Guard 配置工具:wg、wg-quick)
${PACKAGE_INSTALL[int]} net-tools iproute2 openresolv openrc iptables ip6tables
[ "$PUFFERFFISH" != 1 ] && ${PACKAGE_INSTALL[int]} wireguard-tools
;;
Arch )
# 安装一些必要的网络工具包和wireguard-tools (Wire-Guard 配置工具:wg、wg-quick)
${PACKAGE_INSTALL[int]} openresolv
[ "$PUFFERFFISH" != 1 ] && ${PACKAGE_INSTALL[int]} wireguard-tools
esac
# 在不是 wireproxy 方案的前提下，先判断是否一定要用 wireguard kernel，如果不是，修改 wg-quick 文件，以使用 wireguard-go reserved 版
if [ "$PUFFERFFISH" != 1 ]; then
if [ "$WIREGUARD_GO_ENABLE" = '1' ]; then
# 则根据 wireguard-tools 版本判断下载 wireguard-go reserved 版本: wg < v1.0.20210223 , wg-go-reserved = v0.0.20201118-reserved; wg >= v1.0.20210223 , wg-go-reserved = v0.0.20230223-reserved
local WIREGUARD_TOOLS_VERSION=$(wg --version | sed "s#.* v1\.0\.\([0-9]\+\) .*#\1#g")
[[ "$WIREGUARD_TOOLS_VERSION" -lt 20210223 ]] && local WIREGUARD_GO_VERSION=20201118 || local WIREGUARD_GO_VERSION=20230223
wget --no-check-certificate $STACK -O /usr/bin/wireguard-go https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/wireguard-go/wireguard-go-linux-$ARCHITECTURE-$WIREGUARD_GO_VERSION && chmod +x /usr/bin/wireguard-go
if [ "$KERNEL_ENABLE" = '1' ]; then
cp -f /usr/bin/wg-quick{,.origin}
cp -f /usr/bin/wg-quick{,.reserved}
grep -q '^#[[:space:]]*add_if' /usr/bin/wg-quick.reserved || sed -i '/add_if$/ {s/^/# /; N; s/\n/&\twireguard-go "$INTERFACE"\n/}' /usr/bin/wg-quick.reserved
[ "$KERNEL_OR_WIREGUARD_GO" = 'wireguard-go with reserved' ] && cp -f /usr/bin/wg-quick.reserved /usr/bin/wg-quick
else
grep -q '^#[[:space:]]*add_if' /usr/bin/wg-quick || sed -i '/add_if$/ {s/^/# /; N; s/\n/&\twireguard-go "$INTERFACE"\n/}' /usr/bin/wg-quick
fi
fi
fi
wait
# 如有所有 endpoint 都不能连通的情况，脚本中止
if [ -e /tmp/noudp ]; then
rm -f /tmp/noudp /usr/bin/wireguard-go /etc/wireguard/{wgcf-account.conf,warp-temp.conf,warp-account.conf,warp_unlock.sh,warp.conf.bak,warp.conf,up,proxy.conf.bak,proxy.conf,menu.sh,license,language,info-temp.log,info.log,down,account-temp.conf,NonGlobalUp.sh,NonGlobalDown.sh}
[[ -e /etc/wireguard && -z "$(ls -A /etc/wireguard/)" ]] && rmdir /etc/wireguard
error "\n $(text 188) \n"
fi
# WARP 配置修改
MODIFY014="s/\(DNS[ ]\+=[ ]\+\).*/\12001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111,8.8.8.8,8.8.4.4,1.1.1.1/g;7 s/^/PostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;s/^.*\:\:\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY016="s/\(DNS[ ]\+=[ ]\+\).*/\12001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111,8.8.8.8,8.8.4.4,1.1.1.1/g;7 s/^/PostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;s/^.*0\.\0\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY01D="s/\(DNS[ ]\+=[ ]\+\).*/\12001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111,8.8.8.8,8.8.4.4,1.1.1.1/g;7 s/^/PostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;\$a\PersistentKeepalive = 30"
MODIFY104="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\n\n/;s/^.*\:\:\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY106="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\n\n/;s/^.*0\.\0\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY10D="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\n\n/;\$a\PersistentKeepalive = 30"
MODIFY114="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\nPostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;s/^.*\:\:\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY116="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\nPostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;s/^.*0\.\0\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY11D="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\nPostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;\$a\PersistentKeepalive = 30"
MODIFY11N4="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\nPostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;s/^.*\:\:\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY11N6="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\nPostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;s/^.*0\.\0\/0/#&/g;\$a\PersistentKeepalive = 30"
MODIFY11ND="s/\(DNS[ ]\+=[ ]\+\).*/\18.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111/g;7 s/^/PostUp = ip -4 rule add from $LAN4 lookup main\nPostDown = ip -4 rule delete from $LAN4 lookup main\nPostUp = ip -6 rule add from $LAN6 lookup main\nPostDown = ip -6 rule delete from $LAN6 lookup main\n\n/;\$a\PersistentKeepalive = 30"
sed -i "$(eval echo "\$MODIFY$CONF")" /etc/wireguard/warp.conf
if [ "$PUFFERFFISH" = 1 ]; then
# 默认 Endpoint 和 DNS 默认 IPv4 和 双栈的，如是 IPv6 修改默认值
local ENDPOINT=$(awk '/^Endpoint/{print $NF}' /etc/wireguard/warp.conf)
local MTU=$(awk '/^MTU/{print $NF}' /etc/wireguard/warp.conf)
local FREE_ADDRESS6=$(awk '/^Address.*128$/{print $NF}' /etc/wireguard/warp.conf)
local FREE_PRIVATEKEY=$(awk '/PrivateKey/{print $NF}' /etc/wireguard/warp.conf)
[ "$m" = 0 ] && local DNS='2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111,8.8.8.8,8.8.4.4,1.1.1.1' || local DNS='8.8.8.8,8.8.4.4,1.1.1.1,2001:4860:4860::8888,2001:4860:4860::8844,2606:4700:4700::1111'
# 创建 Wireproxy 配置文件
cat > /etc/wireguard/proxy.conf << EOF
# The [Interface] and [Peer] configurations follow the same semantics and meaning
# of a wg-quick configuration. To understand what these fields mean, please refer to:
# https://wiki.archlinux.org/title/WireGuard#Persistent_configuration
# https://www.wireguard.com/#simple-network-interface
[Interface]
Address = 172.16.0.2/32 # The subnet should be /32 and /128 for IPv4 and v6 respectively
Address = $FREE_ADDRESS6
MTU = $MTU
PrivateKey = $FREE_PRIVATEKEY
DNS = $DNS
[Peer]
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
# PresharedKey = UItQuvLsyh50ucXHfjF0bbR4IIpVBd74lwKc8uIPXXs= (optional)
Endpoint = $ENDPOINT
# PersistentKeepalive = 25 (optional)
# TCPClientTunnel is a tunnel listening on your machine,
# and it forwards any TCP traffic received to the specified target via wireguard.
# Flow:
# <an app on your LAN> --> localhost:25565 --(wireguard)--> play.cubecraft.net:25565
#[TCPClientTunnel]
#BindAddress = 127.0.0.1:25565
#Target = play.cubecraft.net:25565
# TCPServerTunnel is a tunnel listening on wireguard,
# and it forwards any TCP traffic received to the specified target via local network.
# Flow:
# <an app on your wireguard network> --(wireguard)--> 172.16.31.2:3422 --> localhost:25545
#[TCPServerTunnel]
#ListenPort = 3422
#Target = localhost:25545
# Socks5 creates a socks5 proxy on your LAN, and all traffic would be routed via wireguard.
[Socks5]
BindAddress = 127.0.0.1:$PORT
# Socks5 authentication parameters, specifying username and password enables
# proxy authentication.
#Username = ...
# Avoid using spaces in the password field
#Password = ...
EOF
# 创建 WireProxy systemd 进程守护
if [ "$SYSTEM" != Alpine ]; then
cat > /lib/systemd/system/wireproxy.service << EOF
[Unit]
Description=WireProxy for WARP
After=network.target
Documentation=https://github.com/fscarmen/warp-sh
Documentation=https://github.com/pufferffish/wireproxy
[Service]
ExecStart=/usr/bin/wireproxy -c /etc/wireguard/proxy.conf
RemainAfterExit=yes
Restart=always
[Install]
WantedBy=multi-user.target
EOF
fi
# 保存好配置文件, 如有 Teams，改为 Teams 账户信息
mv -f menu.sh /etc/wireguard >/dev/null 2>&1
[ "$CHOOSE_TEAMS" = '2' ] && input_url_token token
if [[ "$CONFIRM_TEAMS_INFO" = [Yy] ]]; then
backup_restore_delete backup wireproxy
sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g; s#\(.*Reserved[ ]\+=[ ]\+\).*#\1$CLIENT_ID#g" /etc/wireguard/warp.conf
[ "$CHOOSE_TEAMS" = '2' ] && echo "$TEAMS" > /etc/wireguard/warp-account.conf || sed -i "s#\(\"private_key\":[ ]\+\"\).*\(\"\)#\1$PRIVATEKEY\2#; s#\(\"client_id\":[ ]\+\"\).*\(\"\)#\1$RESERVED\2#; s#\(\"v6\":[ ]\+\"\)[0-9a-f].*\(\"\)#\1$ADDRESS6\2#" /etc/wireguard/warp-account.conf
sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g" /etc/wireguard/proxy.conf
echo "$TEAMS" > /etc/wireguard/info.log
fi
# 创建再次执行的软链接快捷方式，再次运行可以用 warp 指令,设置默认语言
chmod +x /etc/wireguard/menu.sh >/dev/null 2>&1
ln -sf /etc/wireguard/menu.sh /usr/bin/warp && info " $(text 38) "
echo "$L" >/etc/wireguard/language
# 如成功升级 Teams ，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
wireproxy_onoff no_output
if [[ "$WIREPROXY_TRACE4$WIREPROXY_TRACE6" =~ on|plus ]]; then
cancel_account /etc/wireguard/warp-account.conf.bak
backup_restore_delete delete
else
ACCOUNT_CHANGE_FAILED='Teams' && warning "\n $(text 187) \n"
backup_restore_delete restore wireproxy
unset CONFIRM_TEAMS_INFO
wireproxy_onoff no_output
fi
# 设置开机启动 wireproxy
systemctl enable --now wireproxy; sleep 1
# 结果提示，脚本运行时间，次数统计
end=$(date +%s)
info " $(text 149)\n $(text 27): $WIREPROXY_SOCKS5\n WARP$WIREPROXY_ACCOUNT\n IPv4: $WIREPROXY_WAN4 $WIREPROXY_COUNTRY4 $WIREPROXY_ASNORG4\n IPv6: $WIREPROXY_WAN6 $WIREPROXY_COUNTRY6 $WIREPROXY_ASNORG6"
[ -n "$QUOTA" ] && info " $(text 63): $QUOTA "
echo -e "\n==============================================================\n"
hint " $(text 43) \n" && help
else
[ "$ANEMONE" = 1 ] && ( iptables_solution; systemctl restart dnsmasq >/dev/null 2>&1 )
# 经过确认的 teams private key 和 address6，改为 Teams 账户信息，不确认则不升级
[ "$CHOOSE_TEAMS" = '2' ] && input_url_token token
if [[ "$CONFIRM_TEAMS_INFO" = [Yy] ]]; then
backup_restore_delete backup warp
sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g; s#\(.*Reserved[ ]\+=[ ]\+\).*#\1$CLIENT_ID#g" /etc/wireguard/warp.conf
[ "$CHOOSE_TEAMS" = '2' ] && echo "$TEAMS" > /etc/wireguard/warp-account.conf || sed -i "s#\(\"private_key\":[ ]\+\"\).*\(\"\)#\1$PRIVATEKEY\2#; s#\(\"client_id\":[ ]\+\"\).*\(\"\)#\1$RESERVED\2#; s#\(\"v6\":[ ]\+\"\)[0-9a-f].*\(\"\)#\1$ADDRESS6\2#" /etc/wireguard/warp-account.conf
echo "$TEAMS" > /etc/wireguard/info.log
fi
# 创建再次执行的软链接快捷方式，再次运行可以用 warp 指令,设置默认语言
mv -f menu.sh /etc/wireguard >/dev/null 2>&1
chmod +x /etc/wireguard/menu.sh >/dev/null 2>&1
ln -sf /etc/wireguard/menu.sh /usr/bin/warp && info " $(text 38) "
echo "$L" >/etc/wireguard/language
# 自动刷直至成功（ warp bug，有时候获取不了ip地址），重置之前的相关变量值，记录新的 IPv4 和 IPv6 地址和归属地，IPv4 / IPv6 优先级别
info " $(text 39) "
unset IP4 IP6 WAN4 WAN6 COUNTRY4 COUNTRY6 ASNORG4 ASNORG6 TRACE4 TRACE6 PLUS4 PLUS6 WARPSTATUS4 WARPSTATUS6
[ "$COMPANY" = amazon ] && warning " $(text 40) " && reboot || net no_output
# 如成功升级 Teams ，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
if [[ "$TRACE4$TRACE6" =~ on|plus ]]; then
cancel_account /etc/wireguard/warp-account.conf.bak
backup_restore_delete delete
else
ACCOUNT_CHANGE_FAILED='Teams' && warning "\n $(text 187) \n"
backup_restore_delete restore warp
unset CONFIRM_TEAMS_INFO
net
fi
# 显示 IPv4 / IPv6 优先结果
result_priority
# 设置开机启动 warp
${SYSTEMCTL_ENABLE[int]} >/dev/null 2>&1
# 结果提示，脚本运行时间，次数统计
end=$(date +%s)
echo -e "\n==============================================================\n"
info " IPv4: $WAN4 $COUNTRY4 $ASNORG4 "
info " IPv6: $WAN6 $COUNTRY6 $ASNORG6 "
info " $(text 41) " && [ -n "$QUOTA" ] && info " $(text 133) "
info " $PRIORITY_NOW , $(text 186) "
echo -e "\n==============================================================\n"
hint " $(text 43) \n" && help
[[ "$TRACE4$TRACE6" = offoff ]] && warning " $(text 44) "
fi
}
client_install() {
settings() {
# 设置为代理模式，如有 WARP+ 账户，修改 license 并升级
info " $(text 84) "
warp-cli --accept-tos register >/dev/null 2>&1
# 注册失败，给予一个免费账户。否则根据是否有 License 来升级
if [[ $(warp-cli --accept-tos account) =~ 'Error: Missing registration' ]]; then
[ ! -d /var/lib/cloudflare-warp ] && mkdir -p /var/lib/cloudflare-warp
echo '{"registration_id":"317b5a76-3da1-469f-88d6-c3b261da9f10","api_token":"11111111-1111-1111-1111-111111111111","secret_key":"CNUysnWWJmFGTkqYtg/wpDfURUWvHB8+U1FLlVAIB0Q=","public_key":"DuOi83pAIsbJMP3CJpxq6r3LVGHtqLlzybEIvbczRjo=","override_codes":null}' > /var/lib/cloudflare-warp/reg.json
echo '{"own_public_key":"DuOi83pAIsbJMP3CJpxq6r3LVGHtqLlzybEIvbczRjo=","registration_id":"317b5a76-3da1-469f-88d6-c3b261da9f10","time_created":{"secs_since_epoch":1692163041,"nanos_since_epoch":81073202},"interface":{"v4":"172.16.0.2","v6":"2606:4700:110:8d4e:cef9:30c2:6d4a:f97b"},"endpoints":[{"v4":"162.159.192.7:2408","v6":"[2606:4700:d0::a29f:c007]:2408"},{"v4":"162.159.192.7:500","v6":"[2606:4700:d0::a29f:c007]:500"},{"v4":"162.159.192.7:1701","v6":"[2606:4700:d0::a29f:c007]:1701"},{"v4":"162.159.192.7:4500","v6":"[2606:4700:d0::a29f:c007]:4500"}],"public_key":"bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=","account":{"account_type":"free","id":"7e0e6c80-24c5-49ba-ba3d-087f45fcd1e9","license":"n01H3Cf4-3Za40C7b-5qOs0c42"},"policy":null,"valid_until":"2023-08-17T05:17:21.081073724Z","alternate_networks":null,"dex_tests":null,"custom_cert_settings":null}' > /var/lib/cloudflare-warp/conf.json
systemctl restart warp-svc
sleep 1
[[ $(warp-cli --accept-tos account) =~ 'Free' ]] && warning "\n $(text 107) \n"
elif [ -n "$LICENSE" ]; then
hint " $(text 35) " && warp-cli --accept-tos set-license "$LICENSE" >/dev/null 2>&1 && sleep 1 &&
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}') &&
[ "$CLIENT_ACCOUNT" = Limited ] && TYPE='+' && echo "$LICENSE" > /etc/wireguard/license && info " $(text 62) " ||
warning " $(text 36) "
fi
if [ "$LUBAN" = 1 ]; then
i=1; j=3
hint " $(text 11)\n $(text 12) "
warp-cli --accept-tos add-excluded-route 0.0.0.0/0 >/dev/null 2>&1
warp-cli --accept-tos add-excluded-route ::0/0 >/dev/null 2>&1
warp-cli --accept-tos set-mode warp >/dev/null 2>&1
warp-cli --accept-tos set-custom-endpoint "$ENDPOINT" >/dev/null 2>&1
warp-cli --accept-tos connect >/dev/null 2>&1
warp-cli --accept-tos enable-always-on >/dev/null 2>&1
sleep 5
rule_add >/dev/null 2>&1
ip_case d luban
until [[ -n "$CFWARP_WAN4" && -n "$CFWARP_WAN6" ]]; do
(( i++ )) || true
hint " $(text 12) "
warp-cli --accept-tos disconnect >/dev/null 2>&1
warp-cli --accept-tos disable-always-on >/dev/null 2>&1
rule_del >/dev/null 2>&1
sleep 2
warp-cli --accept-tos connect >/dev/null 2>&1
warp-cli --accept-tos enable-always-on >/dev/null 2>&1
sleep 5
rule_add >/dev/null 2>&1
ip_case d luban
if [ "$i" = "$j" ]; then
warp-cli --accept-tos disconnect >/dev/null 2>&1
warp-cli --accept-tos disable-always-on >/dev/null 2>&1
rule_del >/dev/null 2>&1
error " $(text 13) "
fi
done
info " $(text 14) "
else
warp-cli --accept-tos set-mode proxy >/dev/null 2>&1
warp-cli --accept-tos set-proxy-port "$PORT" >/dev/null 2>&1
warp-cli --accept-tos set-custom-endpoint "$ENDPOINT" >/dev/null 2>&1
warp-cli --accept-tos connect >/dev/null 2>&1
warp-cli --accept-tos enable-always-on >/dev/null 2>&1
sleep 2 && [[ ! $(ss -nltp | awk '{print $NF}' | awk -F \" '{print $2}') =~ warp-svc ]] && error " $(text 87) " || info " $(text 86) "
fi
}
# 禁止安装的情况。重复安装，非 AMD64 CPU 架构
[ "$CLIENT" -ge 2 ] && error " $(text 85) "
[ "$ARCHITECTURE" != amd64 ] && error " $(text 101) "
# 安装 WARP Linux Client
[[ "$SYSTEM" = 'CentOS' && "$(expr "$SYS" : '.*\s\([0-9]\{1,\}\)\.*')" -le 7 ]] && error " $(text 145) "
input_license
[ "$LUBAN" != 1 ] && input_port
start=$(date +%s)
mkdir -p /etc/wireguard/ >/dev/null 2>&1
if [ "$CLIENT" = 0 ]; then
info " $(text 83) "
if grep -q "CentOS\|Fedora" <<< "$SYSTEM"; then
curl -fsSl https://pkg.cloudflareclient.com/cloudflare-warp-ascii.repo | tee /etc/yum.repos.d/cloudflare-warp.repo
else
local VERSION_CODENAME=$(grep -i VERSION_CODENAME /etc/os-release | cut -d= -f2)
[[ "$SYSTEM" = Debian && ! $(type -P gpg 2>/dev/null) ]] && ${PACKAGE_INSTALL[int]} gnupg
[[ "$SYSTEM" = Debian && ! $(apt list 2>/dev/null | grep apt-transport-https ) =~ installed ]] && ${PACKAGE_INSTALL[int]} apt-transport-https
curl https://pkg.cloudflareclient.com/pubkey.gpg | gpg --yes --dearmor --output /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg
echo "deb [arch=amd64 signed-by=/usr/share/keyrings/cloudflare-warp-archive-keyring.gpg] https://pkg.cloudflareclient.com/ $VERSION_CODENAME main" | tee /etc/apt/sources.list.d/cloudflare-client.list
fi
${PACKAGE_UPDATE[int]}
${PACKAGE_INSTALL[int]} cloudflare-warp
[ "$(systemctl is-active warp-svc)" != active ] && ( systemctl start warp-svc; sleep 2 )
settings
elif [[ "$CLIENT" = 2 && $(warp-cli --accept-tos status 2>/dev/null) =~ 'Registration missing' ]]; then
[ "$(systemctl is-active warp-svc)" != active ] && ( systemctl start warp-svc; sleep 2 )
settings
else
warning " $(text 85) "
fi
# 创建再次执行的软链接快捷方式，再次运行可以用 warp 指令,设置默认语言
mv -f menu.sh /etc/wireguard >/dev/null 2>&1
chmod +x /etc/wireguard/menu.sh >/dev/null 2>&1
ln -sf /etc/wireguard/menu.sh /usr/bin/warp && info " $(text 38) "
echo "$L" >/etc/wireguard/language
# 结果提示，脚本运行时间，次数统计
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && check_quota client
if [ "$LUBAN" = 1 ]; then
end=$(date +%s)
echo -e "\n==============================================================\n"
info " $(text 94)\n WARP$CLIENT_AC IPv4: $CFWARP_WAN4 $CFWARP_COUNTRY4 $CFWARP_ASNORG4\n WARP$CLIENT_AC IPv6: $CFWARP_WAN6 $CFWARP_COUNTRY6 $CFWARP_ASNORG6 "
else
ip_case d client
end=$(date +%s)
echo -e "\n==============================================================\n"
info " $(text 94)\n $(text 27): $CLIENT_SOCKS5\n WARP$CLIENT_AC IPv4: $CLIENT_WAN4 $CLIENT_COUNTRY4 $CLIENT_ASNORG4\n WARP$CLIENT_AC IPv6: $CLIENT_WAN6 $CLIENT_COUNTRY6 $CLIENT_ASNORG6 "
fi
[ -n "$QUOTA" ] && info " $(text 63): $QUOTA "
echo -e "\n==============================================================\n"
hint " $(text 43) \n" && help
}
# iptables+dnsmasq+ipset 方案，IPv6 only 不适用
stream_solution() {
[ "$m" = 0 ] && error " $(text 147) "
echo -e "\n==============================================================\n"
info " $(text 139) "
echo -e "\n==============================================================\n"
hint " 1. $(text 48) "
[ "$OPTION" != e ] && hint " 0. $(text 49) \n" || hint " 0. $(text 76) \n"
reading " $(text 50) " IPTABLES
case "$IPTABLES" in
1 )
CONF=${CONF1[n]}; ANEMONE=1; install
;;
0 )
[ "$OPTION" != e ] && menu || exit
;;
* )
warning " $(text 51) [0-1]"; sleep 1; stream_solution
esac
}
# wireproxy 方案
wireproxy_solution() {
ss -nltp | grep -q wireproxy && error " $(text 166) "
echo -e "\n==============================================================\n"
info " $(text 165) "
echo -e "\n==============================================================\n"
hint " 1. $(text 48) "
[ "$OPTION" != w ] && hint " 0. $(text 49) \n" || hint " 0. $(text 76) \n"
reading " $(text 50) " WIREPROXY_CHOOSE
case "$WIREPROXY_CHOOSE" in
1 )
PUFFERFFISH=1; install
;;
0 )
[ "$OPTION" != w ] && menu || exit
;;
* )
warning " $(text 51) [0-1]"; sleep 1; wireproxy_solution
esac
}
# 查 WARP+ 余额流量接口
check_quota() {
local CHECK_TYPE="$1"
if [ "$CHECK_TYPE" = 'client' ]; then
QUOTA=$(warp-cli --accept-tos account 2>/dev/null | awk -F' ' '/Quota/{print $NF}')
elif [ -e /etc/wireguard/warp-account.conf ]; then
QUOTA=$(bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --device | awk '/quota/{print $NF}' | sed "s#,##")
fi
# 部分系统没有依赖 bc，所以两个小数不能用 $(echo "scale=2; $QUOTA/1000000000000000" | bc)，改为从右往左数字符数的方法
if [[ "$QUOTA" != 0 && "$QUOTA" =~ ^[0-9]+$ && "$QUOTA" -ge 1000000 ]]; then
CONVERSION=("1000000000000000000" "1000000000000000" "1000000000000" "1000000000" "1000000")
UNIT=("EB" "PB" "TB" "GB" "MB")
for ((o=0; o<${#CONVERSION[*]}; o++)); do
[[ "$QUOTA" -ge "${CONVERSION[o]}" ]] && break
done
QUOTA_INTEGER=$(( $QUOTA / ${CONVERSION[o]} ))
QUOTA_DECIMALS=${QUOTA:0-$(( ${#CONVERSION[o]} - 1 )):2}
QUOTA="$QUOTA_INTEGER.$QUOTA_DECIMALS ${UNIT[o]}"
fi
}
# 更换账户时，原有账户信息的备份、还原和删除
backup_restore_delete() {
local backup_restore_delete="$1"
local WARP_ACCOUNT_TYPE="$2"
if [ "$backup_restore_delete" = backup ]; then
case "$WARP_ACCOUNT_TYPE" in
warp )
[ -e /etc/wireguard/warp.conf ] && cp -f /etc/wireguard/warp.conf{,.bak}
[ -e /etc/wireguard/warp-account.conf ] && cp -f /etc/wireguard/warp-account.conf{,.bak}
[ -e /etc/wireguard/info.log ] && mv -f /etc/wireguard/info.log /etc/wireguard/info.log.bak
[ -e /etc/wireguard/license ] && mv -f /etc/wireguard/license{,.bak}
;;
wireproxy )
[ -e /etc/wireguard/warp.conf ] && cp -f /etc/wireguard/warp.conf{,.bak}
[ -e /etc/wireguard/warp-account.conf ] && cp -f /etc/wireguard/warp-account.conf{,.bak}
[ -e /etc/wireguard/info.log ] && mv -f /etc/wireguard/info.log /etc/wireguard/info.log.bak
[ -e /etc/wireguard/license ] && mv -f /etc/wireguard/license{,.bak}
[ -e /etc/wireguard/proxy.conf ] && cp -f /etc/wireguard/proxy.conf{,.bak}
;;
client )
[ -e /etc/wireguard/license ] && mv -f /etc/wireguard/license{,.bak}
esac
elif [ "$backup_restore_delete" = restore ]; then
case "$WARP_ACCOUNT_TYPE" in
warp )
[ -e /etc/wireguard/info.log ] && rm -f /etc/wireguard/info.log
[ -e /etc/wireguard/warp.conf.bak ] && mv -f /etc/wireguard/warp.conf.bak /etc/wireguard/warp.conf
[ -e /etc/wireguard/warp-account.conf.bak ] && mv -f /etc/wireguard/warp-account.conf.bak /etc/wireguard/warp-account.conf
[ -e /etc/wireguard/info.log.bak ] && mv -f /etc/wireguard/info.log.bak /etc/wireguard/info.log
[ -e /etc/wireguard/license.bak ] && mv -f /etc/wireguard/license.bak /etc/wireguard/license
;;
wireproxy )
[ -e /etc/wireguard/info.log ] && rm -f /etc/wireguard/info.log
[ -e /etc/wireguard/warp.conf.bak ] && mv -f /etc/wireguard/warp.conf.bak /etc/wireguard/warp.conf
[ -e /etc/wireguard/warp-account.conf.bak ] && mv -f /etc/wireguard/warp-account.conf.bak /etc/wireguard/warp-account.conf
[ -e /etc/wireguard/info.log.bak ] && mv -f /etc/wireguard/info.log.bak /etc/wireguard/info.log
[ -e /etc/wireguard/license.bak ] && mv -f /etc/wireguard/license.bak /etc/wireguard/license
[ -e /etc/wireguard/proxy.conf.bak ] && mv -f /etc/wireguard/proxy.conf.bak /etc/wireguard/proxy.conf
;;
client )
[ -e /etc/wireguard/license.bak ] && mv -f /etc/wireguard/license.bak /etc/wireguard/license
esac
elif [ "$backup_restore_delete" = delete ]; then
rm -f /etc/wireguard/*.bak
fi
}
# 更换为免费账户
change_to_free() {
# client 两个模式升级 plus 流程: 1.注销原账户，删除原账户的 License(如有)，停止服务; 2.注册新账户，并显示结果
if [ "$UPDATE_ACCOUNT" = client ]; then
# 流程1:注销原账户，删除原账户的 License(如有)，停止服务
local CLIENT_MODE=$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')
warp-cli --accept-tos delete >/dev/null 2>&1
[ -e /etc/wireguard/license ] && rm -f /etc/wireguard/license
[ "$CLIENT_MODE" = 'Warp' ] && rule_del >/dev/null 2>&1
# 流程2:注册新账户，并显示结果
warp-cli --accept-tos register >/dev/null 2>&1
unset AC && TYPE=' Free'
sleep 2
if [ "$CLIENT_MODE" = 'Warp' ]; then
rule_add >/dev/null 2>&1
ip_case d luban
info " WARP$CLIENT_AC IPv4: $CFWARP_WAN4 $CFWARP_COUNTRY4 $CFWARP_ASNORG4\n WARP$CLIENT_AC IPv6: $CFWARP_WAN6 $CFWARP_COUNTRY6 $CFWARP_ASNORG6\n $(text 62) "
elif [ "$CLIENT_MODE" = 'WarpProxy' ]; then
ip_case d client
info " $(text 27): $CLIENT_SOCKS5\n WARP$CLIENT_AC\n IPv4: $CLIENT_WAN4 $CLIENT_COUNTRY4 $CLIENT_ASNORG4\n IPv6: $CLIENT_WAN6 $CLIENT_COUNTRY6 $CLIENT_ASNORG6\n $(text 62) "
fi
exit 0
elif [[ "$UPDATE_ACCOUNT" =~ 'warp'|'wireproxy' ]]; then
# 如原账户类型是 free，只启动服务不升级
if [ "$ACCOUNT_TYPE" = free ]; then
if [ "$UPDATE_ACCOUNT" = 'warp' ]; then
net
elif [ "$UPDATE_ACCOUNT" = 'wireproxy' ]; then
systemctl restart wireproxy; sleep 1
ip_case d wireproxy
TYPE=' Free' && info " $(text 27): $WIREPROXY_SOCKS5\n WARP$WIREPROXY_ACCOUNT\n IPv4: $WIREPROXY_WAN4 $WIREPROXY_COUNTRY4 $WIREPROXY_ASNORG4\n IPv6: $WIREPROXY_WAN6 $WIREPROXY_COUNTRY6 $WIREPROXY_ASNORG6\n $(text 62) "
fi
exit 0
fi
# warp 和 wireproxy 更换 free 流程: 1.先停止服务; 2. 备份原账户信息; 3.注册新账户; 4.如成功，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
# 流程1:停止服务
case "$UPDATE_ACCOUNT" in
warp )
wg-quick down warp >/dev/null 2>&1
;;
wireproxy )
systemctl stop wireproxy
esac
# 流程2:备份原账户信息
case "$UPDATE_ACCOUNT" in
warp )
backup_restore_delete backup warp
;;
wireproxy )
backup_restore_delete backup wireproxy
esac
# 流程3:注册新账户
bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh | sed 's#cat $registe_path; ##') --registe --file /etc/wireguard/warp-account.conf 2>/dev/null
# 流程4:如成功，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
# 如升级成功的处理: 删除原账户信息文件，注销原账户
if grep -q 'warp_plus' /etc/wireguard/warp-account.conf; then
cancel_account /etc/wireguard/warp-account.conf.bak
backup_restore_delete delete
local PRIVATEKEY="$(grep 'private_key' /etc/wireguard/warp-account.conf | cut -d\" -f4)"
local ADDRESS6="$(grep '"v6.*"$' /etc/wireguard/warp-account.conf | cut -d\" -f4)"
local CLIENT_ID="$(reserved_and_clientid /etc/wireguard/warp-account.conf file)"
sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g; s#\(.*Reserved[ ]\+=[ ]\+\).*#\1$CLIENT_ID#g" /etc/wireguard/warp.conf
[ "$UPDATE_ACCOUNT" = 'wireproxy' ] && sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g" /etc/wireguard/proxy.conf
TYPE=' Free' && [ -e /etc/wireguard/info.log ] && TYPE=' Teams' && grep -q 'Device name' /etc/wireguard/info.log && TYPE='+'
info "\n $(text 62) \n"
# 升级失败的处理，提示并还原为原账户
else
ACCOUNT_CHANGE_FAILED='Free' && warning "\n $(text 187) \n"
case "$UPDATE_ACCOUNT" in
warp )
backup_restore_delete restore warp
;;
wireproxy )
backup_restore_delete restore wireproxy
esac
fi
# 运行 warp 方案
case "$UPDATE_ACCOUNT" in
warp )
net
;;
wireproxy )
wireproxy_onoff
esac
info " $(text 62) "
fi
}
# 更换为 WARP+ 账户
change_to_plus() {
update_license
# client 两个模式升级 plus 流程: 1.如原账户为 plus，备份原 License; 2.注销原账户，停止服务; 3.使用新 License 升级账户; 4.如成功则删除原账户信息文件，保存 license 并显示结果; 如失败则看原账户有没有 License 用于还原
if [ "$UPDATE_ACCOUNT" = client ]; then
[ "$(warp-cli --accept-tos account 2>/dev/null | awk '/License/{print $NF}')" = "$LICENSE" ] && KEY_LICENSE='License' && error " $(text 31) "
# 流程1:如原账户为 plus，备份原 License
backup_restore_delete backup client
# 流程2:注销原账户，停止服务
hint "\n $(text 35) \n"
warp-cli --accept-tos delete >/dev/null 2>&1
local CLIENT_MODE=$(warp-cli --accept-tos settings | awk '/Mode:/{for (i=0; i<NF; i++) if ($i=="Mode:") {print $(i+1)}}')
[ "$CLIENT_MODE" = 'Warp' ] && rule_del >/dev/null 2>&1
# 流程3:使用新 License 升级账户
warp-cli --accept-tos register >/dev/null 2>&1 &&
[ -n "$LICENSE" ] && LICENSE_STATUS=$(warp-cli --accept-tos set-license "$LICENSE")
sleep 1
# 流程4:如成功则删除原账户信息文件，保存 license 并显示结果; 如失败则看原账户有没有 License 用于还原
if [ "$LICENSE_STATUS" = Success ]; then
backup_restore_delete del
echo "$LICENSE" > /etc/wireguard/license
else
case "$LICENSE_STATUS" in
*Invalid\ license* )
warning "\n $(text 169) \n"
;;
*Too\ many\ devices* )
warning "\n $(text 36) \n"
;;
*Error* )
warning "\n $(text 42) \n"
esac
ACCOUNT_CHANGE_FAILED='Plus' && warning "\n $(text 187) \n"
backup_restore_delete restore client
[ -e /etc/wireguard/license ] && warp-cli --accept-tos set-license "$(cat /etc/wireguard/license)" >/dev/null 2>&1; sleep 1
fi
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
unset AC && TYPE=' Free' && [ "$CLIENT_ACCOUNT" = Limited ] && CLIENT_AC='+' && TYPE='+' && check_quota client
if [ "$CLIENT_MODE" = 'Warp' ]; then
rule_add >/dev/null 2>&1
ip_case d luban
[ "$TYPE" = '+' ] && CLIENT_PLUS="$(text 63): $QUOTA"
info " WARP$CLIENT_AC IPv4: $CFWARP_WAN4 $CFWARP_COUNTRY4 $CFWARP_ASNORG4\n WARP$CLIENT_AC IPv6: $CFWARP_WAN6 $CFWARP_COUNTRY6 $CFWARP_ASNORG6\n $CLIENT_PLUS\n $(text 62) \n"
elif [ "$CLIENT_MODE" = 'WarpProxy' ]; then
ip_case d client
[ "$TYPE" = '+' ] && CLIENT_PLUS="$(text 63): $QUOTA"
info " $(text 27): $CLIENT_SOCKS5\n WARP$CLIENT_AC\n IPv4: $CLIENT_WAN4 $CLIENT_COUNTRY4 $CLIENT_ASNORG4\n IPv6: $CLIENT_WAN6 $CLIENT_COUNTRY6 $CLIENT_ASNORG6\n $CLIENT_PLUS\n $(text 62) \n"
fi
elif [[ "$UPDATE_ACCOUNT" =~ 'warp'|'wireproxy' ]]; then
# 如现正使用着 WARP+ 账户，并且新输入的 License 也与现一样的话，脚本退出
[ "$ACCOUNT_TYPE" = + ] && grep -q "$LICENSE" /etc/wireguard/warp-account.conf && KEY_LICENSE='License' && error " $(text 31) "
hint "\n $(text 35) \n"
# warp 和 wireproxy 升级 plus 流程: 1.停止服务; 2.备份原账户信息; 3.注册新账户; 4.使用 License 升级账户; 5.如成功，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
# 流程1:停止服务
case "$UPDATE_ACCOUNT" in
warp )
wg-quick down warp >/dev/null 2>&1
;;
wireproxy )
systemctl stop wireproxy
esac
# 流程2:备份原账户信息
case "$UPDATE_ACCOUNT" in
warp )
backup_restore_delete backup warp
;;
wireproxy )
backup_restore_delete backup wireproxy
esac
# 流程3:注册新账户
bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh | sed 's#cat $registe_path; ##') --registe --file /etc/wireguard/warp-account.conf 2>/dev/null
# 流程4:使用 License 升级账户
local UPDATE_RESULT=$(bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --license $LICENSE)
# 流程5:如成功，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
# 如升级成功的处理: 删除原账户信息文件，注销原账户
if grep -q '"warp_plus": true' <<< "$UPDATE_RESULT"; then
[ -n "$NAME" ] && bash <(curl -m5 -sSL https://${CDN}gitlab.com/fscarmen/warp/-/raw/main/api.sh) --file /etc/wireguard/warp-account.conf --name $NAME >/dev/null 2>&1
cancel_account /etc/wireguard/warp-account.conf.bak
backup_restore_delete delete
local PRIVATEKEY="$(grep 'private_key' /etc/wireguard/warp-account.conf | cut -d\" -f4)"
local ADDRESS6="$(grep '"v6.*"$' /etc/wireguard/warp-account.conf | cut -d\" -f4)"
local CLIENT_ID="$(reserved_and_clientid /etc/wireguard/warp-account.conf file)"
sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g; s#\(.*Reserved[ ]\+=[ ]\+\).*#\1$CLIENT_ID#g" /etc/wireguard/warp.conf
[ "$UPDATE_ACCOUNT" = 'wireproxy' ] && sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g" /etc/wireguard/proxy.conf
sed -i "s#\([ ]\+\"license\": \"\).*#\1$LICENSE\"#g; s#\"account_type\".*#\"account_type\": \"limited\",#g; s#\([ ]\+\"name\": \"\).*#\1$NAME\"#g" /etc/wireguard/warp-account.conf
echo -e "Device name : $NAME" > /etc/wireguard/info.log
echo "$LICENSE" > /etc/wireguard/license
TYPE=' Free' && [ -e /etc/wireguard/info.log ] && TYPE=' Teams' && grep -q 'Device name' /etc/wireguard/info.log && TYPE='+'
info "\n $(text 62) \n"
# 升级失败的处理，提示并还原为原账户
else
case "$UPDATE_RESULT" in
*Invalid\ license* )
warning "\n $(text 169) \n"
;;
*Too\ many\ connected\ devices* )
warning "\n $(text 36) \n"
;;
* )
warning "\n $(text 42) \n"
esac
ACCOUNT_CHANGE_FAILED='Plus' && warning "\n $(text 187) \n"
case "$UPDATE_ACCOUNT" in
warp )
backup_restore_delete restore warp
;;
wireproxy )
backup_restore_delete restore wireproxy
esac
fi
# 运行 warp 方案
case "$UPDATE_ACCOUNT" in
warp )
net
;;
wireproxy )
wireproxy_onoff
esac
info " $(text 62) "
fi
}
# 更换为 Teams 流程: 1.停止服务; 2.备份原账户信息; 3.多种途径升级 Teams 账户; 4.如成功，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
change_to_teams() {
# 选择升级途径
[ -z "$CHOOSE_TEAMS" ] && hint "\n $(text 127) \n" && reading " $(text 50) " CHOOSE_TEAMS
case "$CHOOSE_TEAMS" in
1 )
input_url_token url
;;
2 )
input_url_token token
;;
3 )
input_url_token input
;;
* )
input_url_token share
esac
# 如输入的 PrivateKey 与现在使用的一样，则提示不需要更换，并提出
grep -q "$PRIVATEKEY" /etc/wireguard/warp.conf && KEY_LICENSE='Private key' && error " $(text 31) "
# 流程1:确认升级信息，停止服务
if [[ "$CONFIRM_TEAMS_INFO" = [Yy] ]]; then
case "$UPDATE_ACCOUNT" in
warp )
wg-quick down warp >/dev/null 2>&1
;;
wireproxy )
systemctl stop wireproxy
esac
else
exit 0
fi
# 流程2:备份原账户信息
case "$UPDATE_ACCOUNT" in
warp )
backup_restore_delete backup warp
;;
wireproxy )
backup_restore_delete backup wireproxy
esac
# 流程3:多种途径升级 Teams 账户
sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g; s#\(.*Reserved[ ]\+=[ ]\+\).*#\1$CLIENT_ID#g" /etc/wireguard/warp.conf
[ "$CHOOSE_TEAMS" = '2' ] && echo "$TEAMS" > /etc/wireguard/warp-account.conf || sed -i "s#\(\"private_key\":[ ]\+\"\).*\(\"\)#\1$PRIVATEKEY\2#; s#\(\"client_id\":[ ]\+\"\).*\(\"\)#\1$RESERVED\2#; s#\(\"v6\":[ ]\+\"\)[0-9a-f].*\(\"\)#\1$ADDRESS6\2#" /etc/wireguard/warp-account.conf
[ "$UPDATE_ACCOUNT" = 'wireproxy' ] && sed -i "s#\(PrivateKey[ ]\+=[ ]\+\).*#\1$PRIVATEKEY#g; s#\(Address[ ]\+=[ ]\+\).*\(/128$\)#\1$ADDRESS6\2#g" /etc/wireguard/proxy.conf
# 先创建 info.log 用于判断账户类型
echo "$TEAMS" > /etc/wireguard/info.log
# 流程4:如成功，根据新账户信息修改配置文件并注销旧账户; 如失败则还原为原账户
case "$UPDATE_ACCOUNT" in
warp )
net
if [[ "$TRACE4$TRACE6" =~ on|plus ]]; then
cancel_account /etc/wireguard/warp-account.conf.bak
backup_restore_delete delete
TYPE=' Free' && [ -e /etc/wireguard/info.log ] && TYPE=' Teams' && grep -q 'Device name' /etc/wireguard/info.log && TYPE='+'
info "\n $(text 62) \n"
else
ACCOUNT_CHANGE_FAILED='Teams' && warning "\n $(text 187) \n"
backup_restore_delete restore warp
unset CONFIRM_TEAMS_INFO
net
fi
;;
wireproxy )
wireproxy_onoff
if [[ "$WIREPROXY_TRACE4$WIREPROXY_TRACE6" =~ on|plus ]]; then
cancel_account /etc/wireguard/warp-account.conf.bak
backup_restore_delete delete
TYPE=' Free' && [ -e /etc/wireguard/info.log ] && TYPE=' Teams' && grep -q 'Device name' /etc/wireguard/info.log && TYPE='+'
info "\n $(text 62) \n"
else
ACCOUNT_CHANGE_FAILED='Teams' && warning "\n $(text 187) \n"
backup_restore_delete restore wireproxy
unset CONFIRM_TEAMS_INFO
wireproxy_onoff
fi
esac
}
# 免费 WARP 账户升级 WARP+ 账户
update() {
warp_wireproxy() {
grep -qs 'cKE7LmCF61IhqqABGhvJ44jWXp8fKymcMAEVAzbDF2k=' /etc/wireguard/warp.conf && error "\n $(text 106) \n"
[ ! -e /etc/wireguard/warp-account.conf ] && error " $(text 59) "
[ ! -e /etc/wireguard/warp.conf ] && error " $(text 60) "
CHANGE_DO[0]() { [ "$OPTION" != a ] && unset CHOOSE_TYPE && menu || exit; }
CHANGE_DO[1]() { change_to_free; }
CHANGE_DO[2]() { change_to_plus; }
CHANGE_DO[3]() { change_to_teams; }
# 判断现 WARP 账户类型: free, plus, teams，如果是 plus，查 WARP+ 余额流量
[ -z "$ACCOUNT_TYPE" ] && ACCOUNT_TYPE=Free && CHANGE_TYPE=$(text 174) &&
[ -e /etc/wireguard/info.log ] && ACCOUNT_TYPE=Teams && CHANGE_TYPE=$(text 175) &&
grep -q 'Device name' /etc/wireguard/info.log && ACCOUNT_TYPE='+' && CHANGE_TYPE=$(text 176) && check_quota warp && PLUS_QUOTA="\\n $(text 63): $QUOTA"
if [ -z "$CHOOSE_TYPE" ]; then
hint "\n $(text 173) "
[ "$OPTION" != a ] && hint " 0. $(text 49) \n" || hint " 0. $(text 76) \n"
reading " $(text 50) " CHOOSE_TYPE
fi
# 输入必须是数字且少于等于3
if [[ "$CHOOSE_TYPE" = [0-3] ]]; then
CHANGE_DO[$CHOOSE_TYPE]
else
warning " $(text 51) [0-3] " && unset CHOOSE_TYPE && sleep 1 && update
fi
}
wireproxy_account() {
UPDATE_ACCOUNT=wireproxy
warp_wireproxy
}
warp_account() {
UPDATE_ACCOUNT=warp
warp_wireproxy
}
client_account() {
UPDATE_ACCOUNT=client
[ "$ARCHITECTURE" = arm64 ] && error " $(text 101) "
[ -n "$URL" ] && unset CHOOSE_TYPE && warning "\n $(text 9) "
CHANGE_DO[0]() { menu; }
CHANGE_DO[1]() { change_to_free; }
CHANGE_DO[2]() { change_to_plus; }
# 判断现 WARP 账户类型: free, plus，如果是 plus，查 WARP+ 余额流量
local ACCOUNT_TYPE=Free && local CHANGE_TYPE=$(text 177)
local CLIENT_ACCOUNT=$(warp-cli --accept-tos account 2>/dev/null | awk '/type/{print $3}')
[ "$CLIENT_ACCOUNT" = Limited ] && ACCOUNT_TYPE='+' && CHANGE_TYPE=$(text 178) && check_quota client && PLUS_QUOTA="$(text 63): $QUOTA"
if [ -z "$CHOOSE_TYPE" ]; then
hint "\n $(text 173) "
[ "$OPTION" != a ] && hint " 0. $(text 49) \n" || hint " 0. $(text 76) \n"
reading " $(text 50) " CHOOSE_TYPE
fi
# 输入必须是数字且少于等于2
if [[ "$CHOOSE_TYPE" = [0-2] ]]; then
CHANGE_DO[$CHOOSE_TYPE]
else
warning " $(text 51) [0-2] " && unset CHOOSE_TYPE && sleep 1 && update
fi
}
# 根据 WARP interface 、 Client 和 Wireproxy 的安装情况判断升级的对象
INSTALL_CHECK=("wg-quick" "warp-cli" "wireproxy")
CASE_RESAULT=("0 0 0" "0 0 1" "0 1 0" "0 1 1" "1 0 0" "1 0 1" "1 1 0" "1 1 1")
SHOW_CHOOSE=("$(text 150)" "" "" "$(text 151)" "" "$(text 152)" "$(text 153)" "$(text 154)")
ACCOUNT1=("" "wireproxy_account" "client_account" "client_account" "warp_account" "warp_account" "warp_account" "warp_account")
ACCOUNT2=("" "" "" "wireproxy_account" "" "wireproxy_account" "client_account" "client_account")
ACCOUNT3=("" "" "" "" "" "" "" "wireproxy_account")
for ((c=0; c<${#INSTALL_CHECK[@]}; c++)); do
[ $(type -p ${INSTALL_CHECK[c]}) ] && INSTALL_RESULT[c]=1 || INSTALL_RESULT[c]=0
done
for ((d=0; d<${#CASE_RESAULT[@]}; d++)); do
[[ "${INSTALL_RESULT[@]}" = "${CASE_RESAULT[d]}" ]] && break
done
case "$d" in
0 )
error " $(text 150) "
;;
1|2|4 )
${ACCOUNT1[d]}
;;
* )
hint " ${SHOW_CHOOSE[d]} " && reading " $(text 50) " MODE
case "$MODE" in
[1-3] )
$(eval echo "\${ACCOUNT$MODE[d]}")
;;
* )
warning " $(text 51) [1-3] "; sleep 1; update
esac
esac
}
# 判断当前 WARP 网络接口及 Client 的运行状态，并对应的给菜单和动作赋值
menu_setting() {
if [[ "$CLIENT" -gt 1 || "$WIREPROXY" -gt 0 ]]; then
[ "$CLIENT" -lt 3 ] && MENU_OPTION[1]="1. $(text 88)" || MENU_OPTION[1]="1. $(text 89)"
[ "$WIREPROXY" -lt 2 ] && MENU_OPTION[2]="2. $(text 163)" || MENU_OPTION[2]="2. $(text 164)"
MENU_OPTION[3]="3. $(text 143)"
MENU_OPTION[4]="4. $(text 78)"
ACTION[1]() { client_onoff; }
ACTION[2]() { wireproxy_onoff; }
ACTION[3]() { change_port; }
ACTION[4]() { update; }
else
check_stack
case "$m" in
[0-2] )
MENU_OPTION[1]="1. $(text 66)"
MENU_OPTION[2]="2. $(text 67)"
MENU_OPTION[3]="3. $(text 68)"
ACTION[1]() { CONF=${CONF1[n]}; install; }
ACTION[2]() { CONF=${CONF2[n]}; install; }
ACTION[3]() { CONF=${CONF3[n]}; install; }
;;
* )
MENU_OPTION[1]="1. $(text 141)"
MENU_OPTION[2]="2. $(text 142)"
MENU_OPTION[3]="3. $(text 78)"
ACTION[1]() { stack_switch; }
ACTION[2]() { stack_switch; }
ACTION[3]() { update; }
esac
fi
[ -e /etc/dnsmasq.d/warp.conf ] && IPTABLE_INSTALLED="$(text 92)"
[ -n "$(wg 2>/dev/null)" ] && MENU_OPTION[4]="4. $(text 77)" || MENU_OPTION[4]="4. $(text 71)"
if [ -e /etc/wireguard/warp.conf ]; then
grep -q '#Table' /etc/wireguard/warp.conf && GLOBAL_OR_NOT="$(text 184)" || GLOBAL_OR_NOT="$(text 185)"
fi
MENU_OPTION[5]="5. $CLIENT_INSTALLED$AMD64_ONLY$(text 82)"
MENU_OPTION[6]="6. $(text 123)"
MENU_OPTION[7]="7. $(text 72)"
MENU_OPTION[8]="8. $(text 74)"
MENU_OPTION[9]="9. $(text 73)"
MENU_OPTION[10]="10. $(text 75)"
MENU_OPTION[11]="11. $(text 80)"
MENU_OPTION[12]="12. $IPTABLE_INSTALLED$(text 138)"
MENU_OPTION[13]="13. $WIREPROXY_INSTALLED$(text 148)"
MENU_OPTION[14]="14. $CLIENT_INSTALLED$AMD64_ONLY$(text 168)"
MENU_OPTION[0]="0. $(text 76)"
ACTION[4]() { OPTION=o; onoff; }
ACTION[5]() { client_install; }; ACTION[6]() { change_ip; }; ACTION[7]() { uninstall; }; ACTION[8]() { plus; }; ACTION[9]() { bbrInstall; }; ACTION[10]() { ver; };
ACTION[11]() { bash <(curl -sSL https://${CDN}gitlab.com/fscarmen/warp_unlock/-/raw/main/unlock.sh) -$L; };
ACTION[12]() { ANEMONE=1 ;install; };
ACTION[13]() { PUFFERFFISH=1; install; };
ACTION[14]() { LUBAN=1; client_install; };
ACTION[0]() { exit; }
[ -e /etc/wireguard/info.log ] && TYPE=' Teams' && grep -sq 'Device name' /etc/wireguard/info.log 2>/dev/null && check_quota warp && TYPE='+' && PLUSINFO="$(text 25): $(awk '/Device name/{print $NF}' /etc/wireguard/info.log)\t $(text 63): $QUOTA"
}
# 显示菜单
menu() {
clear
hint " $(text 16) "
echo -e "======================================================================================================================\n"
info " $(text 17):$VERSION\n $(text 18):$(text 1)\n $(text 19):\n\t $(text 20):$SYS\n\t $(text 21):$(uname -r)\n\t $(text 22):$ARCHITECTURE\n\t $(text 23):$VIRT "
info "\t IPv4: $WAN4 $COUNTRY4 $ASNORG4 "
info "\t IPv6: $WAN6 $COUNTRY6 $ASNORG6 "
case "$TRACE4$TRACE6" in
*plus* )
info "\t $(text 114)\t $PLUSINFO\n\t $(text 186) "
;;
*on* )
info "\t $(text 115)\n\t $(text 186) "
esac
[ "$PLAN" != 3 ] && info "\t $(text 116) "
case "$CLIENT" in
0 )
info "\t $(text 112) "
;;
1|2 )
info "\t $(text 113) "
;;
3 )
info "\t WARP$CLIENT_AC $(text 24)\t $(text 27): $CLIENT_SOCKS5\n\t WARP$CLIENT_AC IPv4: $CLIENT_WAN4 $CLIENT_COUNTRY4 $CLIENT_ASNORG4\n\t WARP$CLIENT_AC IPv6: $CLIENT_WAN6 $CLIENT_COUNTRY6 $CLIENT_ASNORG6 "
[ -n "$QUOTA" ] && info "\t $(text 63): $QUOTA "
;;
5 )
info "\t WARP$CLIENT_AC $(text 24)\t $(text 58)\n\t WARP$CLIENT_AC IPv4: $CFWARP_WAN4 $CFWARP_COUNTRY4 $CFWARP_ASNORG4\n\t WARP$CLIENT_AC IPv6: $CFWARP_WAN6 $CFWARP_COUNTRY6 $CFWARP_ASNORG6 "
[ -n "$QUOTA" ] && info "\t $(text 63): $QUOTA "
esac
case "$WIREPROXY" in
0 )
info "\t $(text 160) "
;;
1 )
info "\t $(text 161) "
;;
2 )
info "\t WARP$WIREPROXY_ACCOUNT $(text 159)\t $(text 27): $WIREPROXY_SOCKS5\n\t IPv4: $WIREPROXY_WAN4 $WIREPROXY_COUNTRY4 $WIREPROXY_ASNORG4\n\t IPv6: $WIREPROXY_WAN6 $WIREPROXY_COUNTRY6 $WIREPROXY_ASNORG6 "
esac
grep -q '+' <<< $AC$WIREPROXY_ACCOUNT && info "\t $(text 63): $QUOTA "
echo -e "\n======================================================================================================================\n"
for ((h=1; h<${#MENU_OPTION[*]}; h++)); do hint " ${MENU_OPTION[h]} "; done
hint " ${MENU_OPTION[0]} "
reading "\n $(text 50) " MENU_CHOOSE
# 输入必须是数字且少于等于最大可选项
if [[ $MENU_CHOOSE =~ ^[0-9]{1,2}$ ]] && (( $MENU_CHOOSE >= 0 && $MENU_CHOOSE < ${#MENU_OPTION[*]} )); then
ACTION[$MENU_CHOOSE]
else
warning " $(text 51) [0-$((${#MENU_OPTION[*]}-1))] " && sleep 1 && menu
fi
}
# 传参选项 OPTION: 1=为 IPv4 或者 IPv6 补全另一栈WARP; 2=安装双栈 WARP; u=卸载 WARP; b=升级内核、开启BBR及DD; o=WARP开关；p=刷 WARP+ 流量; 其他或空值=菜单界面
[ "$1" != '[option]' ] && OPTION=$(tr 'A-Z' 'a-z' <<< "$1")
# 参数选项 URL 或 License 或转换 WARP 单双栈
if [ "$2" != '[lisence]' ]; then
case "$OPTION" in
s )
[[ "$2" = [46Dd] ]] && PRIORITY_SWITCH=$(tr 'A-Z' 'a-z' <<< "$2")
;;
i )
[[ "$2" =~ ^[A-Za-z]{2}$ ]] && EXPECT=$2
esac
fi
# 自定义 WARP+ 设备名
NAME=$3
# 主程序运行 1/3
statistics_of_run-times
select_language
check_operating_system
# 设置部分后缀 1/3
case "$OPTION" in
h )
help; exit 0
;;
p )
plus; exit 0
;;
i )
change_ip; exit 0
;;
s )
stack_priority; result_priority; exit 0
esac
# 主程序运行 2/3
check_root_virt
check_cdn
# 设置部分后缀 2/3
case "$OPTION" in
b )
bbrInstall; exit 0
;;
u )
uninstall; exit 0
;;
v )
ver; exit 0
;;
n )
net; exit 0
;;
o )
onoff; exit 0
;;
r )
client_onoff; exit 0
;;
y )
wireproxy_onoff; exit 0
esac
# 主程序运行 3/3
check_dependencies
check_system_info
menu_setting
# 设置部分后缀 3/3
case "$OPTION" in
a )
if [[ "$2" =~ ^[A-Z0-9a-z]{8}-[A-Z0-9a-z]{8}-[A-Z0-9a-z]{8}$ ]]; then
CHOOSE_TYPE=2 && LICENSE=$2
elif [[ "$2" =~ ^http ]]; then
CHOOSE_TYPE=3 && CHOOSE_TEAMS=1 && TEAM_URL=$2
elif [[ "$2" =~ ^ey && "${#2}" -gt 120 ]]; then
CHOOSE_TYPE=3 && CHOOSE_TEAMS=2 && TEAM_TOKEN=$2
fi
update
;;
# 在已运行 Linux Client 前提下，不能安装 WARP IPv4 或者双栈网络接口。如已经运行 WARP ，参数 4,6,d 从原来的安装改为切换
[46d] )
if [ -e /etc/wireguard/warp.conf ]; then
SWITCHCHOOSE="$(tr 'a-z' 'A-Z' <<< "$OPTION")"
stack_switch
else
case "$OPTION" in
4 )
[[ "$CLIENT" = [35] ]] && error " $(text 110) "
CONF=${CONF1[n]}
;;
6 )
CONF=${CONF2[n]}
;;
d )
[[ "$CLIENT" = [35] ]] && error " $(text 110) "
CONF=${CONF3[n]}
esac
install
fi
;;
c )
client_install
;;
l )
LUBAN=1 && client_install
;;
a )
update
;;
e )
stream_solution
;;
w )
wireproxy_solution
;;
k )
kernel_reserved_switch
;;
g )
[ ! -e /etc/wireguard/warp.conf ] && ( GLOBAL_OR_NOT_CHOOSE=2 && CONF=${CONF3[n]} && install; true ) || working_mode_switch
;;
* )
menu
esac
Reference in New Issue View Git Blame Copy Permalink