diff --git a/docs/en/guide/pve/pve_kvm.md b/docs/en/guide/pve/pve_kvm.md
index 971fbf0f59..d025dde0b7 100644
--- a/docs/en/guide/pve/pve_kvm.md
+++ b/docs/en/guide/pve/pve_kvm.md
@@ -221,6 +221,7 @@ Before use, ensure that the current host machine has at least 2 available IP add
 - If the host machine has an accompanying IPv6 subnet, there will be an option to attach an IPv6 address.
 - Relevant system information will be stored in the corresponding virtual machine's NOTE section, accessible for viewing on the web interface.
 - Optionally enable or disable standalone IPV6, requires the host to have at least one /64 subnet.
+- The automatically appended IPV4 address is within the **same subnet** as the host's IPV4 address (IP address prefix is the same)
 
 #### Usage Instructions
 
@@ -267,6 +268,13 @@ The above command is used to create a virtual machine with a dedicated IPv4 addr
 - If the vendor has provided an IPV4 address and subnet length, please carefully compare and write the parameters in the command format shown below.
 - Relevant system information will be stored in the NOTE of the corresponding virtual machine and can be viewed on the WEB end.
 - Optionally enable or disable standalone IPV6, requires the host to have at least one /64 subnet.
+- The manually appended IPV4 address is in a **different subnet** from the host's IPV4 address (different IP address prefixes)
+- Optionally specify the MAC address of the virtual machine
+
+:::tip
+If the router does not recognize the source MAC address, the traffic will be flagged as "abuse" and "may" cause the server to be blocked.
+(If using Hetzner's stand-alone servers be sure to provide the MAC address that corresponds to the additional IPV4 address to prevent abuse from being reported.)
+:::
 
 #### Usage Instructions
 
@@ -279,7 +287,7 @@ curl -L https://raw.githubusercontent.com/oneclickvirt/pve/main/scripts/buildvm_
 **Meaning of each parameter**
 
 ```shell
-./buildvm_manual_ip.sh VMID USERNAME PASSWORD CPU_CORES MEMORY_SIZE_GB STORAGE_SIZE_GB OS STORAGE_DISK IPV4_ADDRESS ATTACH_IPV6(defaults to N)
+./buildvm_manual_ip.sh VMID USERNAME PASSWORD CPU_CORES MEMORY_SIZE_GB STORAGE_SIZE_GB OS STORAGE_DISK IPV4_ADDRESS ATTACH_IPV6(defaults to N) MAC_ADDRESS(Optional whether to specify)
 ```
 
 :::tip
@@ -307,6 +315,7 @@ The above command is used to create a virtual machine with an independent IPV4 a
 | IPV4 Address | a.b.c.d           |
 | Subnet       | /24 Subnet        |
 | IPV6         | None              |
+| MAC_ADDRESS  | None              |
 
 ## Creating Virtual Machines with Pure IPv6 Addresses
 
diff --git a/docs/guide/pve/pve_kvm.md b/docs/guide/pve/pve_kvm.md
index c5f9e209e3..76e2ff7783 100644
--- a/docs/guide/pve/pve_kvm.md
+++ b/docs/guide/pve/pve_kvm.md
@@ -251,6 +251,7 @@ PVE修改VM配置前都得停机先，再修改配置，修改完再启动，免
 - 自动检测可用的IP区间，通过ping检测空余可使用的IP，选取其中之一绑定到虚拟机上
 - 如果宿主机自带IPV6子网将可选择是否附加上IPV6地址
 - 系统的相关信息将会存储到对应的虚拟机的NOTE中，可在WEB端查看
+- 自动附加的IPV4地址与宿主机的IPV4地址是在**同一个子网**内的(IP地址前缀相同)
 
 #### 使用方法
 
@@ -305,6 +306,13 @@ curl -L https://cdn.spiritlhl.net/https://raw.githubusercontent.com/oneclickvirt
 - 如果商家有给IPV4地址和子网长度，请仔细比对，按照下面示例的命令写参数
 - 系统的相关信息将会存储到对应的虚拟机的NOTE中，可在WEB端查看
 - 可选择是否开启独立IPV6，需要宿主机至少有一个/104的子网，最好是一个/64子网
+- 手动附加的IPV4地址与宿主机的IPV4地址是在**不同子网**内的(IP地址前缀不同)
+- 可选择是否指定虚拟机的MAC地址
+
+:::tip
+如果路由器无法识别源 MAC 地址，流量将被标记为“滥用”，并“可能”导致服务器被阻止。
+(如果使用Hetzner的独立服务器务必提供附加IPV4地址对应的MAC地址防止被报告滥用)
+:::
 
 #### 使用方法
 
@@ -325,7 +333,7 @@ curl -L https://cdn.spiritlhl.net/https://raw.githubusercontent.com/oneclickvirt
 **各参数含义**
 
 ```shell
-./buildvm_manual_ip.sh VMID 用户名 密码 CPU核数 内存大小以MB计算 硬盘大小以GB计算 系统 存储盘 IPV4地址 独立IPV6(默认为N)
+./buildvm_manual_ip.sh VMID 用户名 密码 CPU核数 内存大小以MB计算 硬盘大小以GB计算 系统 存储盘 IPV4地址 独立IPV6(默认为N) MAC地址(不提供时将不指定虚拟机的MAC地址)
 ```
 
 :::tip
@@ -353,6 +361,7 @@ curl -L https://cdn.spiritlhl.net/https://raw.githubusercontent.com/oneclickvirt
 | IPV4地址     | a.b.c.d           |
 | 子网         | /24 子网          |
 | IPV6         | 无                |
+| MAC地址      | 无                |
 
 ## 开设纯IPV6地址的虚拟机